Search

This paper investigates the issues of oxygen accumulation and variation in the high-resistance state of HfO2-based resistive random access memory (RRAM), with improvement attained by inserting a thin oxygen-vacancy-rich layer of indium-tin-oxide (ITO) film. By acting as the oxygen ion reservoir, this ITO thin film on the TiN electrode can further stabilize resistance switching (RS) characteristics. In terms of reliability, ac endurance, and retention tests confirm stable RS characteristics for the Pt/HfO2/ITO/TiN device. Finally, a conducting model was proposed to explain the influence of the ITO thin layer and clarify the physical mechanism of electrical improvements. [ABSTRACT FROM AUTHOR]

A highly transparent resistive random access memory with a configuration of multilayer graphene (MLG)/ Dy2O3 /indium tin oxide (ITO) structure is demonstrated in this paper. The fabricated device is transparent, with 80% transmittance at 550 nm. The MLG/ Dy2O3 /ITO device shows unipolar resistance switching with a low operation current (<100~\muA) , low operation voltage (<1~V) , low power consumption (<100~\muW) , high resistance ratio (>10^4) , fast switching speed (<60~ns) , reliable data retention, and promising cycle endurance properties (>200~cycles) , which makes a step toward the realization of low-power transparent electronics for next-generation nonvolatile memory application. The MLG/ Dy2O3 /ITO device exhibited typical filamentary-conduction-type resistive random access memory behavior and no forming process is required. High resistance state (HRS) increases with a reduced device area while low resistance state (LRS) is insensitive to the device sizes. Moreover, Raman spectra obtained in pristine state, HRS, and LRS indicate that the lower power consumption of MLG/ Dy2O3 /ITO device is attributable to the formation of oxygen graphene layers. [ABSTRACT FROM AUTHOR]