Search

Overall design and cold test of a G-band gyrotron traveling-wave tube (gyro-TWT) amplifier are presented. This gyro-TWT aims at achieving a goal of 10-kW pulse output power in the range of 210–220 GHz. It is operated in a circular TE01 mode at the fundamental cyclotron harmonics, which is driven by a 50-kV, 3-A gyrating electron beam. Low velocity spread diode-type magnetron injection gun (MIG), multichannel TE01 mode input coupler, broadband metasurface output window, and lossy material loaded beam–wave interaction circuit are simulated and partially measured. Particle-in-cell (PIC) simulation shows that the designed gyro-TWT can achieve a saturated output power over 10 kW in the range of 210–228 GHz with a beam velocity spread of 2.29%. [ABSTRACT FROM AUTHOR]

Effects of the output window reflection instability on the performance of our designed ${W}$ -band broadband gyrotron traveling wave tube (gyro-TWT) were studied by the simulation and hot test experiments. Strong oscillations and frequency self-modulation (FSM) in the after-cavity interaction (ACI) region were observed in the zero-driven state with a two-layer window and are verified with the beam-wave particle-in-cell simulation. Oscillations and FSM of 80–81.8 GHz and 91.03–94.68 GHz are, respectively, generated from the TE22 and TE02 modes in the ACI region due to the high window reflection level. By using the “sandwich” and meta-surface windows with low reflection and broad bandwidth, the parasitic ACI oscillations can be effectively suppressed. The maximum saturated output power is improved to 156.8 kW at 94 GHz and is zero-driven stable in our recent hot test experiments. [ABSTRACT FROM AUTHOR]

In this article, the design and experimental verification of a 200-kW Q-band gyrotron traveling wave tube (gyro-TWT) amplifier are presented. A low-velocity spread magnetic injection electron gun (MIG), a new type of multichannel TE01 mode input coupler, and a broadband double-disk output window are adopted in the design to improve the performance of the gyro-TWT. At the same time, the lossy ceramic ring-loaded high-frequency interaction circuit is constructed to provide the required loss for stable operation, and the potential oscillations are effectively suppressed. Saturated peak power of 208 kW and 12.5-kW average output power are measured at 47 GHz by hot test, corresponding to a saturated gain of 50.2 dB, an efficiency of 29.4%, and a −3-dB bandwidth of 5.5 GHz. [ABSTRACT FROM AUTHOR]

Gyrotron traveling wave tubes (gyro-TWTs) are of considerable interest for high-power millimeter and submillimeter radiation sources. The analytical design and experiment of a W-band gyro-TWT loaded with nonuniform periodic lossy dielectric rings is presented in this paper. The gyro-TWT is operating in the circular TE01 mode at the fundamental cyclotron harmonic, and driven by a 60 kV, 8-A gyrating electron beam with velocity ratio 1.2. Hot test results were: 1) maximum peak output power 112 kW; 2) 69.7-dB saturated gain; and 3) 23.3% efficiency at 93.5 GHz. The measured bandwidth with peak power greater than 90 kW is about 4 GHz in the range of 93–97 GHz. The hot test results show excellent agreement with the theoretical prediction. The potential backward wave oscillations involving the spurious modes TE11, TE21, and TE02 are effectively suppressed by the nonuniformly loaded periodic lossy dielectric rings. The W-band gyro-TWT is zero-drive stable at the operating points. It demonstrates that a nonuniform loaded lossy dielectric structure is excellent for suppressing potential spurious oscillations. [ABSTRACT FROM AUTHOR]

Design techniques and experimental results are presented on a Ku-band TE11 mode gyro-traveling wave tube. The hot test of this amplifier gives more than 153-kW output power, 2.3-GHz bandwidth (14%), 41-dB saturated gain, and 20% efficiency driven by a 63 kV, 12-A electron beam with a pitch angle (vtvz) of 1.2, and velocity spread of 5%. A linear polarized TE11 mode input coupler is used to introduce the input power. The stability of the amplifier from oscillation, including both the operating TE11 mode and the backward wave TE21 mode, has been investigated with linear codes, nonlinear self-consistent theory, and 3-D PIC CHIPIC simulation. To suppress the potential gyro-backward wave oscillator interactions, the high frequency circuit is loaded with lossy ceramic rings. The lossy structure is optimized by nonlinear theory and 3-D PIC simulation. A low velocity spread magnetron injection gun is designed with a new structure. [ABSTRACT FROM AUTHOR]

Distributed lossy dielectric is of considerable interest for high-power milli- and submillimeter radiation sources, particularly for gyrotron traveling wave tubes (gyro-TWTs). The analytical design and experiment of a Q-band gyro-TWT loaded with periodic lossy dielectric rings operating in the circular \TE01 mode at the fundamental cyclotron harmonic are presented. The gyro-TWT is driven by a 70-kV 10-A helical electron beam with a velocity ratio of 1.0. Hot test performs maximum peak output power of 152 kW, 41-dB saturated gain, and 21.7% efficiency at 47.6 GHz. The measured bandwidth over 100 kW is at the range of 47–49 GHz. PIC simulation and large-signal prediction show excellent agreements to the hot test results. The potential backward wave oscillation interactions involving the spurious modes \TE11, \TE21, and \TE02 are effectively suppressed by loading lossy dielectric rings periodically. The Q-band gyro-TWT is zero-drive stable at the operating points, which demonstrates that loading lossy dielectric is excellent to stabilize the spurious oscillations. Moreover, the designs of magnetron injection gun, interaction circuits, and input and output structures are also achieved to satisfy the requirements. [ABSTRACT FROM AUTHOR]