Search

A new topology to excite the HE04 mode in wide bandwidth for confocal gyro-TWAs is presented. The mode exciter consists of a TE04 mode exciter and a TE04–HE04 transition waveguide section formed by two cascaded one-stage tapers. In addition, the closed-to-open confocal waveguide boundaries are studied. Numerical results show that the port reflection of the whole structure is well below −10 dB over 90–110 GHz; the transmission of HE04 mode is better than −1 dB over 94–107 GHz. Even more important, a maximum transmission variation of less than ±0.15 dB over the 1-dB bandwidth and a mode purity of better than 97.2% over the 3-dB bandwidth are achieved. The mode exciter is compact and easy to be fabricated, which can be applied to cold-test experiments of confocal gyro-amplifiers circuits. [ABSTRACT FROM AUTHOR]

In this paper a methodology to excite a circular high-order TE13-mode via a rectangular TE50 mode was proposed and verified by the millimeter wave measurement. This topology can also be applied to launch other high-order modes (HOMs) such as TE 1n , TE 2n^\prime and TE 0n^\prime (n or n^\prime =1 , 2, 3) modes via different transition rectangular TE _{m0} ( m = 2n-1$ or $m = 2n^\prime $ ) modes, which can be achieved by adjusting the number of coupling apertures and optimizing dimensions of tapered waveguides. A W-band TE13 mode converter was designed and analyzed. Two identical converters connected back to back as a proof-of-principle operating at $Q$ -band were fabricated and measured. Good performance was observed, which was in good agreement with the simulation results. This HOM converter has many potential applications in areas such as gyro-devices, high-power transmission lines, RF multimode systems of accelerators, microwave/plasma, and antenna systems. [ABSTRACT FROM PUBLISHER]

Novel compact input and output couplers for broadband operation of sheet beam traveling wave tubes are analyzed, designed, and cold tested. Multistage stepped waveguide and cascaded Bragg resonators are proposed and applied to improve the performance and extend the operating bandwidth. Optimized curve-Bragg resonators are studied to correct the phase between the reflector and $H$ -bend waveguide, which bring about a further enhancement of the coupler behavior. HFSS simulations predict a −3 dB transmission bandwidth about 38% and 34% are achieved, respectively, in Ku and $Q$ band. Besides, the large beam tunnel property of this kind of coupler benefit the beam transport of sheet beam devices. Different components as the input and output couplers for Ku- and $Q$ -band SB-TWT are manufactured and cold tested. Results of vector network analyzer measurement and simulation present an excellent agreement. [ABSTRACT FROM AUTHOR]

Wider bandwidth property of traveling-wave tubes (TWTs) is continuously pursued to satisfy the increased data rates and multiple channels in modern communications. In this paper, the coalesced-mode operation instead of the general single-mode operation for the double staggered grating waveguide (DSGW) slow-wave structure (SWS) is proposed to achieve an ultrawideband property of the TWTs driven by sheet electron beam. Analytical results of the high-frequency properties for the SWS, including the dispersion characteristics, interaction impedance, and transmission property, demonstrate that the coalesced-mode operation for the DSGW is possible. A novel loading approach of the attenuator with good performance, and meanwhile, a compact configuration is proposed to suppress the potential oscillations, thus leading to a steady beam–wave interaction for the coalesced-mode operation. To verify the concept of coalesced-mode operation, particle-in-cell simulation is performed. Simulation results demonstrate that the optimized RF circuit indeed can steadily operate in coalesced mode and produce over 5-kW saturated output power ( $\sim 10$ % efficiency) in a very broad frequency ranging from 37 to 52 GHz, corresponding to a relative bandwidth of 33.7%. [ABSTRACT FROM AUTHOR]