Search

Overall design and cold test of a G-band gyrotron traveling-wave tube (gyro-TWT) amplifier are presented. This gyro-TWT aims at achieving a goal of 10-kW pulse output power in the range of 210–220 GHz. It is operated in a circular TE01 mode at the fundamental cyclotron harmonics, which is driven by a 50-kV, 3-A gyrating electron beam. Low velocity spread diode-type magnetron injection gun (MIG), multichannel TE01 mode input coupler, broadband metasurface output window, and lossy material loaded beam–wave interaction circuit are simulated and partially measured. Particle-in-cell (PIC) simulation shows that the designed gyro-TWT can achieve a saturated output power over 10 kW in the range of 210–228 GHz with a beam velocity spread of 2.29%. [ABSTRACT FROM AUTHOR]

Effects of the output window reflection instability on the performance of our designed ${W}$ -band broadband gyrotron traveling wave tube (gyro-TWT) were studied by the simulation and hot test experiments. Strong oscillations and frequency self-modulation (FSM) in the after-cavity interaction (ACI) region were observed in the zero-driven state with a two-layer window and are verified with the beam-wave particle-in-cell simulation. Oscillations and FSM of 80–81.8 GHz and 91.03–94.68 GHz are, respectively, generated from the TE22 and TE02 modes in the ACI region due to the high window reflection level. By using the “sandwich” and meta-surface windows with low reflection and broad bandwidth, the parasitic ACI oscillations can be effectively suppressed. The maximum saturated output power is improved to 156.8 kW at 94 GHz and is zero-driven stable in our recent hot test experiments. [ABSTRACT FROM AUTHOR]

A broadband dielectric window with high power handling capability for gyrotron traveling wave tubes (gyro-TWTs) had been designed based on the step-type impedance transition structure. The manufactured beryllium oxide (BeO) window can achieve a relative bandwidth of 35.3% with a maximum reflection of −20 dB in the ${X}$ -band, and the corresponding transmission loss is over −0.1 dB. The resonant spikes caused by engineering factors, including assembly tilt and gap, are investigated and analyzed. Thermal analysis shows that the BeO window can achieve a high average/CW power handling capability of over 232 kW within a wide frequency range. The fabricated input window has been successfully applied in our ${X}$ -band broadband and high-power gyro-TWT. [ABSTRACT FROM AUTHOR]

In this article, the design and experimental verification of a 200-kW Q-band gyrotron traveling wave tube (gyro-TWT) amplifier are presented. A low-velocity spread magnetic injection electron gun (MIG), a new type of multichannel TE01 mode input coupler, and a broadband double-disk output window are adopted in the design to improve the performance of the gyro-TWT. At the same time, the lossy ceramic ring-loaded high-frequency interaction circuit is constructed to provide the required loss for stable operation, and the potential oscillations are effectively suppressed. Saturated peak power of 208 kW and 12.5-kW average output power are measured at 47 GHz by hot test, corresponding to a saturated gain of 50.2 dB, an efficiency of 29.4%, and a −3-dB bandwidth of 5.5 GHz. [ABSTRACT FROM AUTHOR]

Design and microwave measurement of a linearly polarized circular TE11 mode coupler are reported in this article. Based on our earlier designed input coupler with smooth wall, we proposed an improved structure with ridges loading resulting in a bandwidth up to 29.2%. Simulation results show the port reflection S11 less than −10 dB is in 7.9–10.6 GHz. And the split transmission S21 and S31are over −3.4 dB in this frequency range. According to the simulation results, the designed input coupler is fabricated and measured with the vector network analyzer. The measurement results show excellent performance, which is in good agreement with the simulation when the conductor loss is taken into consideration. In addition, an input coupler with a cutoff waveguide is designed to improve the efficiency of single-port transmission and the power utilization. Simulation results show the transmission efficiency of the single port achieves 91%. [ABSTRACT FROM AUTHOR]

This paper presents the development of highly efficient gyrotron traveling-wave tube (gyro-TWT) with a nonuniform dielectric-loaded interaction circuit. The high-quality electron beam has been generated by curved-profile magnetron injection gun (MIG). With regard to the profile optimization, simulated annealing algorithm (SAA) and genetic algorithm (GA) are applied. An electron beam with a pitch factor of 1.6 and low-axial velocity spread of 0.9182% have been obtained. The parametric sensitivity is discussed in detail. A nonuniform dielectric-loaded circuit has been employed to suppress both global oscillations and local oscillations. Different thicknesses of dielectric materials have been manufactured and measured, demonstrating the circuit loss of oscillation modes that are enough for stable operation. The interaction circuit is analyzed under the guidance of nonlinear self-consistent theory and particle-in-cell (PIC) codes. The tube achieves a saturated peak output power of 36.24 kW at 93 GHz, corresponding to a saturated gain of 54 dB and a maximum efficiency of 45.3% within a 3-dB saturated bandwidth of 5 GHz. [ABSTRACT FROM AUTHOR]

To accurately measure the performance of dielectric loaded circuits for gyrotron traveling wave tubes, a novel topological structure to generate the TE21○ or TE01○ (superscript represents circular waveguide) mode is proposed and verified in this paper. The topology is constituted by an overmoded TE10□ to TE20□ (superscript represents rectangular waveguide) mode converter with multiple matching steps and a taper from TE20□ to TE21○ or TE01○ mode. This topology allows the TE21○ or TE01○ mode to be excited by changing the taper dimensions. Simulation results reveal that the TE21○ and TE01○ mode converters, respectively, have a 1-dB bandwidth of 12.8 and 9.3 GHz with an excellent performance. Converters for the back-to-back millimeter-wave measurements were fabricated with computerized numerical control and wire cutting techniques. Vector network analyzer measurements are in good agreement with the simulations. [ABSTRACT FROM PUBLISHER]

A methodology to generate a circular TE13 mode for the operation of high-order mode (HOM) gyrotron-traveling-wave tubes is presented in this paper. A rectangular TE10 mode is efficiently converted into a circular TE13 mode using Y-type power dividers. Symmetric curved lossy dielectrics and dielectric rings are, respectively, positioned to suppress the potential coupling TE32 and TE71 modes according to their electric and magnetic field distribution properties. An HOM converter without dielectrics loaded was designed, constructed, and cold tested. Back-to-back transmission measurements exhibit good agreement with the results of computer simulations. [ABSTRACT FROM AUTHOR]

Wider bandwidth property of traveling-wave tubes (TWTs) is continuously pursued to satisfy the increased data rates and multiple channels in modern communications. In this paper, the coalesced-mode operation instead of the general single-mode operation for the double staggered grating waveguide (DSGW) slow-wave structure (SWS) is proposed to achieve an ultrawideband property of the TWTs driven by sheet electron beam. Analytical results of the high-frequency properties for the SWS, including the dispersion characteristics, interaction impedance, and transmission property, demonstrate that the coalesced-mode operation for the DSGW is possible. A novel loading approach of the attenuator with good performance, and meanwhile, a compact configuration is proposed to suppress the potential oscillations, thus leading to a steady beam–wave interaction for the coalesced-mode operation. To verify the concept of coalesced-mode operation, particle-in-cell simulation is performed. Simulation results demonstrate that the optimized RF circuit indeed can steadily operate in coalesced mode and produce over 5-kW saturated output power ( $\sim 10$ % efficiency) in a very broad frequency ranging from 37 to 52 GHz, corresponding to a relative bandwidth of 33.7%. [ABSTRACT FROM AUTHOR]

Design techniques and experimental results are presented on a Ku-band TE11 mode gyro-traveling wave tube. The hot test of this amplifier gives more than 153-kW output power, 2.3-GHz bandwidth (14%), 41-dB saturated gain, and 20% efficiency driven by a 63 kV, 12-A electron beam with a pitch angle (vtvz) of 1.2, and velocity spread of 5%. A linear polarized TE11 mode input coupler is used to introduce the input power. The stability of the amplifier from oscillation, including both the operating TE11 mode and the backward wave TE21 mode, has been investigated with linear codes, nonlinear self-consistent theory, and 3-D PIC CHIPIC simulation. To suppress the potential gyro-backward wave oscillator interactions, the high frequency circuit is loaded with lossy ceramic rings. The lossy structure is optimized by nonlinear theory and 3-D PIC simulation. A low velocity spread magnetron injection gun is designed with a new structure. [ABSTRACT FROM AUTHOR]