Search

In this article, the design and experimental verification of a 200-kW Q-band gyrotron traveling wave tube (gyro-TWT) amplifier are presented. A low-velocity spread magnetic injection electron gun (MIG), a new type of multichannel TE01 mode input coupler, and a broadband double-disk output window are adopted in the design to improve the performance of the gyro-TWT. At the same time, the lossy ceramic ring-loaded high-frequency interaction circuit is constructed to provide the required loss for stable operation, and the potential oscillations are effectively suppressed. Saturated peak power of 208 kW and 12.5-kW average output power are measured at 47 GHz by hot test, corresponding to a saturated gain of 50.2 dB, an efficiency of 29.4%, and a −3-dB bandwidth of 5.5 GHz. [ABSTRACT FROM AUTHOR]

A high power Ku-band TE01 mode gyrotron traveling wave tube amplifier (gyro-TWT) is designed and experimented in this paper. The emphasis is put on the gyro-TWT with a high average power. In the design process, a low average velocity spread magnetron injection electron gun and a wideband multichannel TE01 mode input coupler are adopted. At the same time, a high average power curved collector is also applied. To suppress the potential gyro-backward wave oscillator interactions, a new type lossy ceramic rings and lossy ceramic pieces hybrid loaded structure is used in the high-frequency interaction circuit of gyro-TWT. In hot test, the developed Ku-band TE01 mode gyro-TWT is driven by a 70-kV 23-A helical electron beam and produce a ~31.5 kW maximum saturated output average power at 16.2 GHz, corresponding to a saturated peak power of ~450 kW (7% duty ratio), a saturated gain of ~40.5 dB, an efficiency of ~28%. The measured 3-dB bandwidth is ~2.1 GHz. The gyro-TWT is found to be zero-drive stable at these operating points. [ABSTRACT FROM AUTHOR]

The design and experiment of a high power and broadband Ku-band gyrotron traveling-wave tube (gyro-TWT) amplifier operating in the TE11 mode are presented in this paper. A new-type broadband rotating TE11 mode input coupler is applied to excite operating mode and a broadband three-disk beryllium oxide ceramic output window is used in the designed gyro-TWT. In order to suppress the potential oscillations, expand working bandwidth, and improve the heat dissipation capability of high frequency system, a periodic beryllium oxide and silicon carbide composite lossy ceramic rings loaded high-frequency circuit with a nonlinear small change output taper is adopted in the gyro-TWT. When the beam voltage is 70 kV and the beam current is 12 A, the experiment of this Ku-band gyro-TWT developed shows that the measured maximum output average power is ~20 kW at the frequency 16 GHz, corresponding to a maximum output pulse power of ~200 kW (10% duty ratio), a gain of 43.0 dB and a maximum efficiency of 23.8%, −3-dB saturation gain bandwidth of 2.6 GHz (~16.3%), and −1-dB saturation gain bandwidth of 1.5 GHz (~9.4%). Under the condition of 10-W constant input power driven, the measured −3-dB constant driven bandwidth is 1.4 GHz (~8.8%). [ABSTRACT FROM AUTHOR]