Search

A diode magnetron injection gun (MIG) has been designed and analyzed for G-band gyro-traveling wave tube (Gyro-TWT). A novel curved surface emitter is proposed to enhance the beam quality. An electron beam with velocity ratio of 1.20 and transverse velocity spread of 2.11% is obtained. The beam transportation stability with geometry misalignment is also analyzed, and the assembly accuracy should be controlled under 0.1 mm. The stray electron is intercepted by the capture structure to avoid the bombardment to the interaction circuit. Then the cathode is fabricated, and the temperature distribution is measured. The experimental result matches well with the simulation. The electron beam quality considering expansion, surface roughness, and thermal emission is estimated, and the total transverse velocity spread is about 2.63%. [ABSTRACT FROM AUTHOR]

In order to enhance the power capacity of gyro-traveling wave tube (Gyro-TWT), a novel multisectorial-tunnel circuit is presented in this article. The multisectorial tunnel could extend the transverse dimension of RF circuit for higher power electron beam transportation. The azimuthal drifting and transportation distortion performance for rotated electron beam are analyzed. A multibeam magnetron injection gun (MIG) is designed. The electron beam with pitch factor of 1.09 and axial velocity spread of 3.5% is obtained. And the designed cathode was fabricated and temperature distribution was measured. It provides a possible method to enhance the power capacity of Gyro-TWT. [ABSTRACT FROM AUTHOR]

This paper presents the development of highly efficient gyrotron traveling-wave tube (gyro-TWT) with a nonuniform dielectric-loaded interaction circuit. The high-quality electron beam has been generated by curved-profile magnetron injection gun (MIG). With regard to the profile optimization, simulated annealing algorithm (SAA) and genetic algorithm (GA) are applied. An electron beam with a pitch factor of 1.6 and low-axial velocity spread of 0.9182% have been obtained. The parametric sensitivity is discussed in detail. A nonuniform dielectric-loaded circuit has been employed to suppress both global oscillations and local oscillations. Different thicknesses of dielectric materials have been manufactured and measured, demonstrating the circuit loss of oscillation modes that are enough for stable operation. The interaction circuit is analyzed under the guidance of nonlinear self-consistent theory and particle-in-cell (PIC) codes. The tube achieves a saturated peak output power of 36.24 kW at 93 GHz, corresponding to a saturated gain of 54 dB and a maximum efficiency of 45.3% within a 3-dB saturated bandwidth of 5 GHz. [ABSTRACT FROM AUTHOR]