Search

In this paper, the optical and electrical pulse responses of an optimized high-speed organic light-emitting diode (OLED) is investigated as a function of the pulse duration. The original design is based on the coplanar waveguide electrodes that are implemented on a transparent and conductive oxide thin film. The designed electrodes with reduced serial resistances (13 $\Omega $ ) allow to maximize the pulse energy delivery and to feed the organic device with short electrical pulses of few nanoseconds for the first time. This is achieved by designing the electrodes to have 50- $\Omega $ characteristic impedance, thanks to microwave techniques, and by implementing small values of capacitance (4.5 pF). The experimental results demonstrate $\boldsymbol \mu $ -OLED electrical and optical responses to electrical excitation pulses as short as 2.5 ns, for the first time, and state-of-the-art current densities above 1.7 kA/cm2. Moreover, and rather unexpectedly, the developed characterization procedure to extract the reported results demonstrated the first direct measurement of the electroluminescence lifetime of organic materials in the nanosecond time scale.

The electric and optical impulse response of two types of high-speed OLED (HSOLED) driven by ultrashort electrical pulses is investigated. The two HSOLED were designed and manufactured to be characterized in the presence of electrical pulses ranging from 10 to 100 ns in duration and a repetition rate of 10 Hz. The impact of the OLED geometry and the fabrication process on the time response is investigated. This is the first time that an optimized HSOLED exhibits an electrical time response as low as 2.1±0.6 ns and also shorter than the device optical decay time (9.8± 0.2 ns). Moreover, the HSOLED measured current density reaches 3.0 kA/cm2, the highest value reported in the literature, with state-of-the-art electroluminescence of 12 W/cm2.