Search

The combined star/pentagon connection of five-phase induction machines was recently demonstrated as a promising compromise between conventional star and pentagon connections. It combines the advantages of both star and pentagon connections without any additional hardware for winding changeover. This connection is based on two five-phase single layer concentrated winding sets shifted in space by π/10 and connected in a combined star/pentagon configuration to provide five-phase terminals. Since the combined star/pentagon connected induction machine is fundamentally an asymmetrical ten-phase machine, the machine mathematical model possesses additional subspaces, which affect the behavior of the machine especially under open line conditions. Starting from the conventional five-phase and m -bar squirrel cage induction machine model, the phase-variable model of the combined star/pentagon connection is introduced in this paper. The corresponding equivalent dq model with five decoupled subspaces, which can account for air gap harmonics up to ninth order, is then derived. Finally, it was shown that the machine model could be simply approximated with only two subspaces similar to a conventional five-phase induction machine with sinusoidally distributed winding, where the flux produced by the nonfundamental subspace could be neglected. The model is verified using a 1 kW prototype five-phase induction machine. [ABSTRACT FROM PUBLISHER]

Five-phase induction machines are generally modeled using multiple dq planes or using a phase variable model. This paper considers modeling five-phase induction machines using a voltage-behind-reactance (VBR) configuration. This configuration lends itself suitable for time-domain circuit-based simulators as the MATLAB/Simulink SimPowerSystems (SPS) toolbox. The stator electrical dynamics are represented in five-phase coordinates, while the rotor electrical circuit is modeled using rotor flux linkage as the state variable and expressed in the dq stator reference frame. The VBR model is equivalent to a conventional dq model; however, it facilitates the connection of an external inductance without affecting numerical accuracy and calculation efficiency. It also facilitates the simulation of different winding connections, series-connected multimotors, and open phase(s) conditions. The model is, first, derived for a magnetically linear system and then it is extended to include the effect of magnetic saturation. The flux correction method is used to represent the effect of magnetic saturation with a simple modification to represent the effect of cross coupling between fundamental and third sequence planes due to saturation effect. The dynamic cross saturation is considered by adding compensating terms that depend on magnetizing inductance variation. The proposed model is experimentally verified using a prototype 1.5-hp five-phase induction machine under different operating conditions. [ABSTRACT FROM AUTHOR]

Examines the effects of pole pair and rotor slot numbers on the presence of different harmonics under healthy and eccentric conditions in a three phase induction motor with different rotor cages. Development of a theoretical approach; Simulation results using the winding function approach (WFA) and the modified WFA; Experimental results verifying the theory.