Search

An improved two-stage model predictive current control (MPCC) for three-phase three-level converters in the paper, which can simultaneously achieve common-mode voltage (CMV) reduction, effective dc-link capacitor voltage control, and decreased computational burden, is proposed. Compared to the other current control strategies, it has the capability of handling multiple control objectives and possesses a simple structure. Furthermore, it greatly reduces the CMV since the peak CMVs of all the candidate voltage vectors are constrained to be less than one sixth of the dc-link voltage. In addition, an optimal two-stage voltage vector selection mechanism is employed in the proposed method. It helps to significantly reduce the computational complexity. Simulation and experimental results are provided to verify the effectiveness of the proposed method. [ABSTRACT FROM AUTHOR]

This article presents an optimal model predictive flux control (MPFC) for a two-level inverter fed induction motor. Integrating discrete SVM into FCS-MPFC enhances the performance of the IM drive. However, conventional DSVM-MPFC requires to enumerate and evaluate a higher number of virtual vectors in the prediction loop. In this paper, a high-efficient and low complexity voltage selection method is proposed to reduce the number of candidate voltage vectors from 38 to 15 without any suboptimality. Both steady-state and transient performances of the proposed method remain the same as the 38-vector based conventional DSVM-MPFC, producing the same cost-function values in all operating conditions. Furthermore, an online switching frequency reduction technique is proposed to achieve a minimum commutation per inverter vector change within each sampling cycle and between adjacent cycles. By appropriately arranging the sequence of real voltage vectors in each sampling cycle, a lower average switching frequency is achieved. The proposed switching frequency reduction method decreases the switching losses without compromising the performance of DSVM-MPFC as only the applied sequences of the real voltage vectors are optimized. Experimental studies are conducted to verify the effectiveness of the proposed algorithm. [ABSTRACT FROM AUTHOR]

This paper presents an efficient direct-model predictive control (EDMPC) technique for surface-mounted permanent-magnet synchronous generators (PMSGs) in variable-speed wind energy conversion systems. The proposed control technique is based on directly computing the reference voltage vector (VV) from the demanded currents using a deadbeat (DB) function. Then, a discrete-time integral action (DTIA) is added to this DB function to enhance the robustness of the proposed EDMPC scheme against variations of the machine parameters and to achieve a good steady-state response. The proposed DTIA is simple and easy to implement. Finally, according to the location of this reference VV, two evaluations of the quality function are only required. Accordingly, the proposed EDMPC technique with DTIA overcomes the following drawbacks of the conventional direct-model predictive control (DMPC): high calculation burden, sensitivity to parameters mismatches, and non-zero steady-state error. The performance of the proposed EDMPC technique with DTIA has been experimentally investigated and compared with that of the EDMPC with time delay control approach and with the performance of the convention DMPC using a $\text{14.5}\,\text{kW}$ PMSG. [ABSTRACT FROM AUTHOR]