Search

Nominal grid data of geostationary remote sensing satellites are fundamental for generating the subsequent products. It can be obtained by normalized projection models, mainly based on the imaging mode. However, there are only definitions and primary descriptive equations for the normalized geostationary projection (NGP) model in the existing literature, while the corresponding imaging mode and the physical interpretation are missing, thus hindering the understanding of the produced nominal grid dataset as well as the subsequent products based on the grid. This paper first derived the imaging mode for NGP based on the limited literature. In addition, another new imaging mode was introduced and analyzed based on NGP. The corresponding projection model [nonstandard normalized geostationary projection (NNGP)] was proposed, which is entirely consistent with the situation of America’s Geostationary Operational Environmental Satellite-R Series (GOES-R) and Chinese Fengyun-4A (FY-4A). Furthermore, this paper proposed a novel nominal projection model for frame imaging, which is consistent with the imaging mode of China’s Gaofen-4. Finally, extensive experiments were designed to comparatively analyze the three nominal grids and demonstrate a detailed difference. By providing a theoretical basis for nominal grid selection, this research is highly significant for the efficient near-real-time production and further applications of geostationary images, as well as the conversion between different datasets resulting from different nominal grid data. In addition, our models are sufficiently tested during the on-orbit running of FY-4A, the first satellite of China’s second-generation three-axis stabilized geostationary meteorological satellite series. The algorithms provide the technical support for the high-precision image navigation and registration and play a significant role in robustly producing the meteorological data with similar quality to those from GOES-R. [ABSTRACT FROM AUTHOR]

Land surface temperature and emissivity (LST&E) are key variables for a wide variety of surface–atmosphere studies, and it is very important to validate the accuracy of different LST&E retrieval algorithms. In this paper, the accuracy of the Advanced Spaceborne Thermal Emission and Reflection (ASTER) temperature emissivity separation (TES) algorithm with the water vapor scaling (WVS) method and the ASTER standard LSE&E products (without WVS) was validated using 12 ASTER scenes from May 2012 to September 2012 with concurrent ground LST and emissivity measurements collected in an arid area in northwest China during the Heihe Watershed Allied Telemetry Experimental Research experiment. Both the National Center for Environmental Prediction (NCEP) and MOD07 atmospheric profile products were employed to perform the atmospheric correction. The results showed that the WVSTES LSTs retrieved from the two profiles both demonstrate good accuracies, with average biases of 0.34 and 0.24 K and average root-mean-square errors (RMSEs) of 1.52 and 1.46 K for the NCEP and MOD07 profiles, respectively. When the WVS was not applied, we obtained an average bias of 1.26 K and an average RMSE of 2.05 K for the AST08 product. The emissivities from the WVSTES algorithm with the two profiles both showed good agreements with the ground CE312 measurements, with mean differences of the five ASTER bands that were less than 0.01. AST05 showed anomalous emissivity spectra and underestimated the emissivity values of graybody surfaces when compared with the ground data, with mean differences of greater than 0.015, which were more obvious for cases with high water vapor. This paper demonstrated that the WVS method is critical for retrieving ASTER TES LST with accuracies within 1.5 K and emissivity within 0.015 for a wide range of atmospheric conditions and land surface types. [ABSTRACT FROM AUTHOR]

Traditional remote sensing observation can only derive chlorophyll-a concentration in surface water (Chlasurf), which is insufficient for water quality monitoring or biogeochemical applications. In this paper, a column-integrated biomass (CIB) estimation algorithm was established in Lake Dianchi, China, and the CIB was estimated by Ocean and Land Color Instrument (OLCI) data from 2016 to 2018. First, the results show that the method is applicable to CIB estimation in nonbloom conditions [mean absolute percentage error (MAPE) = 10.55%, mean ratio (MR) = 0.996]. On the one hand, Chlasurf could be estimated using a universal model of Chla (UMOC) estimation for case-II waters; on the other hand, CIB could be obtained from Chlasurf according to the linear relationship between the Chlasurf and CIB. Second, both the spatial and temporal variabilities of Chlasurf are larger than those of CIB, which indicates that the biomass of the whole lake is relatively stable from day to day. During algal bloom periods, the CIB at nonbloom areas tends to decrease, suggesting that algae from nonbloom regions have migrated to bloom regions. Third, wind speed (WS) is the most critical meteorological factor affecting the water surface biomass, compared with other parameters. The average percentage of surface-to-total biomass in nonbloom conditions is about 7% when the WS is less than 2 m/s. [ABSTRACT FROM AUTHOR]

A long-term historical aerosol optical depth (AOD) data set from 1982 to 2011 over China (15–45° N; 75–135° E) with 0.1 spatial resolution has been produced from Advanced Very High Resolution Radiometer (AVHRR) Pathfinder Atmospheres—Extended level-2B data. The spatial distribution pattern shows that high AOD values are found in central and eastern China over the entire period with AODs larger in summer and spring than in autumn and winter. As the high-quality products from AERONET were absent for this period over mainland China, AOD data obtained using the broadband extinction method from solar radiation stations have been used to verify the quality of the AVHRR AOD data set over China. The intercomparison results show that the interannual variation of AOD has been well captured in the variation curve of the AOD monthly mean and the variation trend is also consistent over the whole period. The correlation coefficient of the monthly mean is mostly larger than 0.55, the agreement index is larger than 0.57, and the relative error is less than 21%. Both AVHRR and visibility data sets show high values in regions with rapid economic development. Using Moderate Resolution Imaging Spectroradiometer AOD data as references, it is found that AVHRR AOD from this paper has better accuracy in general than that from Deep Blue (DB) algorithm over China, especially over eastern and southern China, while DB provides more coverage especially over bright surface such as northwest China. This long-term historic AOD data set can be used together with other AOD data sets to study the climate and environmental changes, especially in the 1980s and 1990s. [ABSTRACT FROM AUTHOR]

GaoFen1 is the first high-resolution earth observation satellite built in China, and carries four wide field-of-view (WFV) cameras to achieve large-scale monitoring and mapping. However, the unstable attitude measurement accuracy of the satellite generally imparts low geopositioning accuracy and inconsistent geometric error in overlapping areas of WFV images. A feasible and effective large-scale planar block adjustment (PBA) method is presented that corrects the geometric errors of the vast WFV images integrally, further improving the geometric accuracy of these images. In addition, whether ground control points (GCPs) are needed, and the effect of different numbers of GCPs on PBA accuracy is also investigated. Two key technologies are used in this paper. First, a universal PBA error equation based on the virtual control points is presented to allow PBA with or without GCPs. Second, an adjustment method aided by a digital elevation model is adopted to overcome the weak convergence geometry among WFV images, further ensuring stable estimation of PBA. The effectiveness of the proposed method was verified by 664 WFV images covering most of mainland China. The satisfactory experimental results indicate that the method presented herein is reasonable and effective, but that a certain number of GCPs is needed to ensure the accuracy of large-scale PBA results for WFV images. [ABSTRACT FROM AUTHOR]

Due to the rapid urbanization of China, many villages in the urban fringe are enveloped by ever-expanding cities and become so-called urban villages (UVs) with substandard living conditions. Despite physical similarities to informal settlements in other countries (e.g., slums in India), UVs have access to basic public services, and more importantly, villagers own the land legitimately. The resulting socio-economic impact on urban development attracts increasing interest. However, the identification of UVs in previous studies relies on fieldwork, leading to late and incomplete analyses. In this paper, we present three scene-based methods for detecting UVs using high-resolution remotely sensed imagery based on a novel multi-index scene model and two popular scene models, i.e., bag-of-visual-words and supervised latent Dirichlet allocation. In the experiments, our index-based approach produced Kappa values around 0.82 and outperformed conventional models both quantitatively and visually. Moreover, we performed multitemporal classification to evaluate the transferability of training samples across multitemporal images with respect to three methods, and the index-based approach yielded best results again. Finally, using the detection results, we conducted a systematic spatiotemporal analysis of UVs in Shenzhen and Wuhan, two mega cities of China. At the city level, we observe the decline of UVs in urban areas over the recent years. At the block level, we characterize UVs quantitatively from physical and geometrical perspectives and investigate the relationships between UVs and other geographic features. In both levels, the comparison between UVs in Shenzhen and Wuhan is made, and the variations within and across cities are revealed. [ABSTRACT FROM PUBLISHER]

Ziyuan1-02C (ZY1-02C) was launched on December 22, 2011, and it is the first civilian high-resolution remote sensing satellite in China. However, the limited precision of the onboard attitude measurement system causes many errors during attitude transfer by ZY1-02C. Thus, there are complex distortions in the images obtained by ZY1-02C, which restricts its application greatly. In this paper, we consider the feasibility of attitude error correction based on parallel observations with high-resolution cameras, and the method is described in detail. To validate the efficiency of the proposed method, several images and corresponding control data were collected from the Henan, Taihang Mountain, Neimeng, and Taiyuan areas in China. The experimental results indicate that seamless mosaic images without distortion can be obtained using our method. Furthermore, the positioning accuracy with a few ground control points (GCPs) was shown to be better than 1.5 pixels and equivalent to the accuracy of the GCPs. [ABSTRACT FROM PUBLISHER]

In the above paper , the name of the institution of the authors Dandan Zhi, Tanqi Yu, and Yan Pan were incorrect, they are with the Anhui Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, Key Laboratory of Optical Calibration and Characterization, Hefei 230031, China, and also with the University of Science and Technology of China, Hefei 230026, China (e-mail: 1416652331@qq.com). [ABSTRACT FROM AUTHOR]