Search

The nonstationary and non-Gaussian distribution of the high-resolution (HR) synthetic aperture radar (SAR) image provides much valuable information. However, the current methods, especially deep learning models, directly learn spatial features from HR SAR data while ignoring global statistical information. Combining the local spatial features and global statistical properties of HR SAR images is urgently needed to capture complete HR SAR characteristics. In this paper, a feature fusion network (Fusion-Net) using both deep spatial context encoder and nonstationary joint statistical model (NS-JSM) is proposed for the first time. Fusion-Net realizes the fusion description of local spatial and global statistical features in an end-to-end supervised classification framework. First, a deep spatial context encoder network (DSCEN) is designed based on multiscale group convolution (MSGC) module and channel attention (CA) module. The DSCEN expands the scope of context information extraction with few parameters and increases the interaction between high- level feature channels. Then, the NS-JSM is adopted to capture the unique SAR statistical information. Specifically, the SAR image is transformed into the Gabor wavelet domain. The produced sub-band magnitudes and phases are modeled by the log-normal and uniform distribution. The covariance matrix (CM) is calculated for mapped sub-band data to capture the interscale and intrascale nonstationary correlation. Finally, the group compression and smooth normalization units are introduced into Fusion-Net to fuse the statistical features and spatial features, which not only exploits the complementary information between different features but also optimizes the fusion feature representation. Experiments on four real HR SAR images validate the superiority of the proposed method over other related algorithms. [ABSTRACT FROM AUTHOR]

Polarimetric whitening filter (PWF) can be used to filter polarimetric synthetic aperture radar (PolSAR) images to improve the contrast between ships and sea clutter background. For this reason, the output of the filter can be used to detect ships. This paper deals with the setting of the threshold over PolSAR images filtered by the PWF. Two parameter-constant false alarm rate (2P-CFAR) is a common detection method used on whitened polarimetric images. It assumes that the probability density function (PDF) of the filtered image intensity is characterized by a log-normal distribution. However, this assumption does not always hold. In this paper, we propose a systemic analytical framework for CFAR algorithms based on PWF or multi-look PWF (MPWF). The framework covers the entire log-cumulants space in terms of the textural distributions in the product model, including the constant, gamma, inverse gamma, Fisher, beta, inverse beta, and generalized gamma distributions ($\text{G}\Gamma $ Ds). We derive the analytical forms of the PDF for each of the textural distributions and the probability of false alarm (PFA). Finally, the threshold is derived by fixing the false alarm rate (FAR). Experimental results using both the simulated and real data demonstrate that the derived expressions and CFAR algorithms are valid and robust. [ABSTRACT FROM AUTHOR]

Nowadays, in the electromagnetism environment, the complex interferences, including the narrowband interferences (NBIs) and wideband interferences (WBIs), may severely affect the imaging quality of synthetic aperture radar (SAR) systems. Most traditional methods can only tackle with one kind of isolated interferences, NBIs or WBIs, which are widely distributed in the 1-D range frequency domain or 2-D range time–frequency domain. In this paper, we propose a complex tensor robust principal component analysis (CT-RPCA) method based on a novel 3-D range-azimuth-space tensor model to mitigate continuously distributed NBIs and WBIs simultaneously. The main contributions of this paper are summarized in three aspects. First, we strictly prove the low-rank property of the isolated NBIs and WBIs in the range-azimuth domain. Second, we use multiple views of the signal to construct a novel 3-D range-azimuth-space tensor model, where both the NBI tensor and the WBI tensor have spatial low-rank property due to the approximately stable frequency bands along the spatial dimension. Third, the CT-RPCA method is employed to efficiently suppress NBIs and WBIs simultaneously by solving the tensor RPCA problem. Finally, the real SAR data with simulated complex interferences are employed to demonstrate the effectiveness of the proposed method. [ABSTRACT FROM AUTHOR]

Monitoring the sea ice cover is important for both climate studies and ice operations, such as shipping. It is challenging to validate even basic essential variables, such as the sea ice extent, due to a lack of appropriate validation data. Instead of focusing on validation, this paper looks at the use of categorical triple collocation (CTC) for the task of quantitatively comparing three colocated data sets. CTC has been developed and used in earlier studies to rank binary data sets. In this paper, we extend earlier studies and bring in recent results from the binary classification community to estimate the class imbalance (the relative proportion of each class, ice or water). We then use this class imbalance to obtain quantitative estimates of the proportion correct of ice (sensitivity) and the proportion correct of water (specificity). The methodology is first tested using toy data, after which three data sets from the Gulf of Saint Lawrence, on the east coast of Canada, are used. These data sets are from an ice–ocean model, a passive microwave sea ice concentration retrieval, and a sea ice concentration retrieval from synthetic aperture radar (SAR). By looking at both the sensitivity and the specificity, it is found that the passive microwave data have difficulty in recognizing ice during freeze-up, but they perform well at obtaining the correct water observations. This distinction cannot be made by ranking the data sets. The CTC method is compared with, and found to be complementary to, a validation using ice/water states from the interactive multisensor snow and ice mapping system. [ABSTRACT FROM AUTHOR]

This paper investigates new approaches to estimating the motion of the dynamic ocean surface using a multi-channel synthetic aperture radar (MSAR) with $M$ phase centers arranged in an along-track configuration. The objective of this paper is to determine the processing methods that produce the finest velocity resolution, an issue that arises due to the finite coherence time of radar backscatter produced by the sea surface. The investigation is carried out both theoretically, using synthesized data produced from a modeled MSAR covariance matrix, as well as experimentally, using images collected with a 16-channel system. Three processing methods are considered: linear regression along with a multi-baseline phase progression, estimation of the velocity centroid, and coherent averaging of the shortest baseline interferograms. Both the theoretical and experimental results indicate that simple averaging of the shortest-baseline interferograms often produces the best velocity precision. [ABSTRACT FROM AUTHOR]

The main challenging problems in ocean current retrieval from along-track interferometric (ATI)-synthetic aperture radar (SAR) are phase calibration and wave bias removal. In this paper, a method based on differential InSAR (DInSAR) technique for correcting the phase offset and its variation is proposed. The wave bias removal is assessed using two different Doppler models and two different wind sources. In addition to the wind provided by an atmospheric model, the wind speed used for wave correction in this work is extracted from the calibrated SAR backscatter. This demonstrates that current retrieval from ATI-SAR can be completed independently of atmospheric models. The retrieved currents, from four TanDEM-X (TDX) acquisitions over the Öresund channel in the Baltic Sea, are compared to a regional ocean circulation model. It is shown that by applying the proposed phase correction and wave bias removal, a good agreement in spatial variation and current direction is achieved. The residual bias, between the ocean model and the current retrievals, varies between 0.013 and 0.3 m/s depending on the Doppler model and wind source used for wave correction. This paper shows that using SAR as a source of wind speed reduces the bias and root-mean-squared-error (RMSE) of the retrieved currents by 20% and 15%, respectively. Finally, the sensitivity of the sea current retrieval to Doppler model and wind errors are discussed. [ABSTRACT FROM AUTHOR]

This paper proposes a complex-valued convolutional neural network for land form classification and discovery in interferometric synthetic aperture radar (InSAR). Since the amount of satellite-borne SAR data has been increasing drastically, it is necessary to structurize the local features contained in observation data prior to utilization in the so-called big data framework for higher usability. Convolutional neural networks have such potential in general. However, there exists no network that can deal with complex amplitude data obtained in InSAR consistently. In this paper, we propose a complex-valued convolutional neural network to deal with InSAR. We demonstrate that the network classifies slopes and plains adaptively and, moreover, indicates small volcanos similar to a sample volcano (Omuroyama) included in the InSAR data. We also find their characteristic features emerging in the kernels in the convolution layers. These results reveal that the proposed complex-valued convolutional neural network is capable of successfully discovering unidentified lands similar to a prepared sample, which is highly useful for the InSAR data structurization. [ABSTRACT FROM AUTHOR]

Frequency-modulation continuous-wave (FMCW) synthetic-aperture radar (SAR) can minimize the peak transmission power of sensors and reduce the size and weight of the systems. Wavenumber domain algorithm (WDA) is an accurate focusing method for SAR imaging. By using the exact signal form to compensate the phase error, WDA can achieve exact scene recovery from high-squint and long aperture data as long as the platform velocity is stable. In this paper, we introduce WDA to FMCW SAR and discuss the WDA-based FMCW SAR sparse imaging method. There are two main contributions of this paper: 1) a motion compensation-based WDA imaging method is introduced to correct the motion error that is often associated in practical airborne FMCW SAR data and 2) a novel WDA-based FMCW SAR sparse imaging method is developed to further improve the performance of recovered image. Compared with the typical WDA algorithm, the sparse imaging method can suppress the noise and sidelobes and perform the sparse scene recovery from the downsampled data. Experimental results via simulated and real airborne data verify the presented WDA-based FMCW SAR imaging methods. [ABSTRACT FROM AUTHOR]

Due to the coherent processing of synthetic aperture radar (SAR) systems, multiplicative speckle noise arises providing a granular appearance in SAR images. This kind of noise makes it difficult to analyze and interpret surface images from the earth. Therefore, studying alternatives to attenuate the speckle is a constant task in the image processing literature. Current state-of-the-art filters in remote sensing area explore the philosophy of similarity between patches. This paper aims to expand the traditional nonlocal means (NLM) algorithm originally proposed for the additive white Gaussian noise (AWGN) to deal with the speckle. In our research, we consider the worst scenario, i.e., the single-look speckle noise, and apply the NLM to filter intensity SAR images in the Haar wavelet domain. To accomplish this task, the Haar coefficients were described by exponential-polynomial (EP) and gamma distributions. Furthermore, stochastic distances based on these two mentioned distributions were derived and embedded in the NLM filter by replacing the Euclidean distance of the original method. This represents the main contribution of the proposed research. Finally, this paper analyzes and compares the synthetic and real experiments of the proposed method with some recent filters of the literature demonstrating its competitive performance. [ABSTRACT FROM AUTHOR]

Studies pertaining to small scale structures producing scintillations using synthetic aperture radars (SARs) have predominantly been conducted at low-latitude regions. The high-latitude region (auroral belt and polar caps) is highly dynamic and varies in response to stimuli from solar winds and the magnetosphere in complex ways. In this paper, the authors have shown the capability of SAR for scintillation observation in the auroral region. An attempt has been made to fit an irregularity anisotropy model to SAR measurements for characterizing the ionospheric irregularities in the auroral regions. The dependency of anisotropy irregularity model on parameters, such as irregularity structure (axial ratio), their orientation with respect to magnetic field lines, and the ionospheric plasma drift, is closely studied using Advanced Land Observing Satellite (ALOS)-2 datasets acquired over Alaska. Geomagnetic indices and total electron content data are consistent with the occurrence of the scintillation event under study. Drift velocity measurements from high-frequency radars in the super dual array radar network (SuperDARN) showed that the anisotropy is independent of the magnitude and the azimuth angle of the plasma drift. The typical range of orientation angle suitable for the high latitude regions probed by ALOS-2 is demonstrated to be between 120°–135°. This paper explores the idea of inferring irregularity anisotropy by comparing the amplitude scintillation (S4) index measured in SAR data pairs using two well-established techniques. The image contrast technique heavily relies on the accurate modeling of anisotropy, whereas the radar cross-sectional enhancement method is independent of it. This feature has been exploited in the $S_{4}$ comparison to finally fit the choice of irregularity axial ratio and conclude that the sheet-like structures best describe the ionospheric irregularity structure in the region under observation. [ABSTRACT FROM AUTHOR]

Being capable of providing weather-independent, day-and-night, forward-looking, and high-resolution images, bistatic forward-looking synthetic aperture radar (BFSAR) is a promising sensing technique in applications such as the scene-matching-aided navigation for recently emerging high-speed maneuvering platforms (HMPs). Because of the high speed and the great maneuverability of HMPs and the bistatic forward-looking configuration, conventional image formation algorithms, such as polar format algorithm (PFA), are no longer suitable for HMP-borne BFSAR (HMP-BFSAR). Hence, in this paper, we propose a novel PFA for HMP-BFSAR image formation. In the proposed PFA, a range model, termed as quasi-continuous -move range model, is established by taking the maneuvers of the receiver during pulse propagation into account instead of adopting stop-and-go approximation. Moreover, to take advantage of the collected $k$ -set efficiently, an affine mapping, termed as $k$ -set affine mapping, is conceived to transform the parallelogram-shaped $k$ -set support region to a horizontal and quasi-rectangular one. Furthermore, to compensate for the defocus effect induced by wavefront curvature, a closed-form refocus filter based on the implicit function theorem is derived. Both point target simulation and distributed target simulation are presented in this paper. The simulation results show that the proposed PFA significantly outperforms the conventional PFA in terms of focusing quality and computational efficiency when applied to HMP-BFSAR image formation. [ABSTRACT FROM AUTHOR]

This paper deals with precise absolute geolocation of point targets by means of a pair of high-resolution synthetic aperture radar (SAR) acquisitions, acquired from a satellite. Even though a single SAR image is a 2-D projection of the backscatter, some 3-D information can be extracted from a defocussing analysis, depending on the resolution, thanks to orbital curvature. A second acquisition, observing the same scene under a different look angle, adds stereogrammetric capability and can achieve geolocation accuracy at decimeter level. However, for the stereogrammetric analysis to work, it is necessary to match targets correctly in the two images. This task is particularly difficult if it has to be automatic and targets are dense. Unfortunately, the defocussing-based geolocation is not sufficient for reliable target matching: the limiting factor is the unknown tropospheric delay that can cause geolocation errors of several meters in the elevation direction. However, observing that the tropospheric phase screen displays a low-pass character, this paper shows how to identify statistically the local atmospheric disturbances, therefore dramatically improving the score of successful matching. All steps involved exploit peculiar radar image characteristics and, thanks to this, avoid generic point cloud matching algorithms. The proposed algorithm is shown at work on a pair of TerraSAR-X staring spotlight images. [ABSTRACT FROM AUTHOR]

A novel physical paradigm is explored in this paper: synthetic-aperture radar (SAR) ocean speckle is informative. This paper experimentally analyzes the SAR ocean speckle intensity K-distribution model versus sea-surface wind field. It is shown that the normalized intensity moments of the K-distribution measured from actual C-band SAR data well fit the theoretical ones under different wind conditions, i.e., wind regime and relative SAR-wind azimuth direction. In addition, it is observed that the K-distribution shape parameter decreases as wind speed increases. A sensitivity of the K-distribution shape parameter on incidence angle and wind direction is also observed, where the largest variability is experienced at higher incidence angles and under crosswind relative azimuth angle. [ABSTRACT FROM AUTHOR]

In conventional polar format algorithm (PFA), the effective imaging scene is bounded to a limited region near the reference point unless postprocessing is utilized. In a previous paper, refocusing and zoom-in PFA (RZPFA) for curvilinear spotlight SAR imaging were proposed to produce a refocused image for an arbitrary region of interest (ROI) with constant elevation. However, for certain applications, the residual distortion and defocus caused by rugged terrain could not be ignored. In this article, RZPFA is adapted to incorporate the known digital elevation model (DEM) into the imaging process, which is named as orthorectified PFA (OPFA). With just little additional computations than RZPFA, OPFA can realize georeferenced orthorectified imaging via a nonuniform fast Fourier transform of type 3 (NuFFT-3) without the need of postprocessing. The quantitative metrics for the residual DEM distortion and residual DEM defocus were also derived to determine the effective imaging extent of OPFA. Within the effective extent, the proposed OPFA can obtain an orthorectified image efficiently, and the image has a very high quality comparable to backprojection (BP). The imaging results of measured echo and DEM data demonstrated the effectiveness of the proposed algorithm. [ABSTRACT FROM AUTHOR]

This paper proposes a new scheme of motion parameter estimation and relocation for airborne three-channel circular stripmap synthetic aperture radar (CSSAR)-ground moving target indication (GMTI) systems. Compared with the conventional straight-path SAR, the parameter estimation of a target is more challenging because the target’s range history and signal model are more complicated due to the complexity of the relative motion between CSSAR and ground moving target. In this paper, the signal model of a ground moving target and the expression for its along-track interferometric (ATI) phase from the environment of airborne three-channel CSSAR are derived. The coupling effect among the target’s motion and position parameters is also figured out. Then, a scheme of motion parameter estimation and relocation is proposed. The proposed scheme utilizes the ATI phase and the quadratic-term coefficient in the range equation to estimate the target’s motion and position parameters and utilizes an iterative strategy to address the coupling effect among these parameters. Numerical simulations are conducted to validate the satisfactory performance achieved by the proposed algorithm. [ABSTRACT FROM AUTHOR]

This paper discusses an image processing architecture and tools to address the problem of ship detection in synthetic-aperture radar images. The detection strategy relies on a tree-based representation of images, here a Maxtree, and graph signal processing tools. Radiometric as well as geometric attributes are evaluated and associated with the Maxtree nodes. They form graph attribute signals which are processed with graph filters. The goal of this filtering step is to exploit the correlation existing between attribute values on neighboring tree nodes. Considering that trees are specific graphs where the connectivity toward ancestors and descendants may have a different meaning, we analyze several linear, nonlinear, and morphological filtering strategies. Beside graph filters, two new filtering notions emerge from this analysis: tree and branch filters. Finally, we discuss a ship detection architecture that involves graph signal filters and machine learning tools. This architecture demonstrates the interest of applying graph signal processing tools on the tree-based representation of images and of going beyond classical graph filters. The resulting approach significantly outperforms state-of-the-art algorithms. Finally, a MATLAB toolbox allowing users to experiment with the tools discussed in this paper on Maxtree or Mintree has been created and made public. [ABSTRACT FROM AUTHOR]

In most of the existing ground penetrating radar (GPR) imaging algorithms, using either full or sparse data collection, the ground is modeled as a single half-space layer. In this paper, a generalized sparse imaging approach with total variation minimization (TVM) for multiple-input multiple-output (MIMO) GPR imaging through multilayered subsurface is proposed. The multilayered media Green’s function is incorporated in the imaging algorithm to take into account the complex wave propagation effects under multilayered subsurface. An analytical expression of the layered subsurface Green’s function is derived using the stationary-phase method, which significantly reduces the computation time and complexity. On the other hand, as TVM minimizes the gradient of the image, its incorporation in the imaging algorithm results in a reconstruction that preserves the geometry and edges of the targets better than the standard L1-minimization-based sparsity-driven imaging. The number of antenna elements and frequency measurements in MIMO GPR system can be significantly reduced using the proposed technique without degradation of the image quality. Although MIMO configuration is investigated in this paper, the presented approach can be simply applied to monostatic synthetic aperture radar. [ABSTRACT FROM AUTHOR]

This paper examines the attainable performance of various Doppler sublook or subband cross correlation techniques for vessel detection in synthetic aperture radar images. Research from the past two decades claims that these techniques were capable of improving the detection of small ships in challenging maritime environments. Despite many published experimental examples, a thorough analytical investigation corroborating this claim is noticeably absent. This paper is based on a rigorous theoretical analysis founded on the statistical properties of a textured sea surface model in thermal noise with simultaneous consideration of a constant false alarm rate. Emphasis has been placed on the correct accounting for detrimental physical effects caused by the Doppler spectrum being split into nonoverlapping parts, which have not been sufficiently considered in the literature to date. The theoretical results are confirmed via simulations and are substantiated with real RADARSAT-2 data. The analysis in this paper has neither found theoretical nor empirical evidence that sublook correlation techniques outperform the classical detector based on the image magnitude. [ABSTRACT FROM AUTHOR]

This paper evaluates the capability of Sentinel-1 VH-polarized synthetic aperture radar signals, involving 738 scenes in the interferometric wide swath (IW) mode, for ocean surface wind speed retrieval using a novel subswath-based C-band cross-polarized ocean model. When compared with in situ measurements, it is observed that wind speed retrieval accuracy varies progressively along swath, with the most accurate wind speed retrievals being derived from subswath 3 [root-mean-square error (RMSE) of $1.82\,\,\text {m}\cdot \mathrm {s}^{-1}$ ], followed by subswath 2 (RMSE of $1.92\,\,\text {m}\cdot \mathrm {s}^{-1}$), while subswath 1 showed the lowest retrieval accuracy (RMSE of $2.37\,\,\text {m}\,\cdot \,\mathrm {s}^{-1}$). The average RMSE of wind speeds retrieved from all the three subswaths is $2.08\,\,\text {m}\,\cdot \,\mathrm {s}^{-1}$ under low-to-high wind speed regimes (wind speeds $< 25\,\,\text {m}\,\cdot \,\mathrm {s}^{-1}$). We further observed that the dependence of VH-polarized normalized radar cross section (NRCS) on incidence angle is attributable to the high and changing noise equivalent sigma zero (NESZ) with incidence angle under low-to-moderate wind speed regimes. And that strong VH-polarized radar signals could overcome the NESZ effect, thereby eliminating the dependence of VH-polarized NRCS on incidence angle under strong wind conditions. For Sentinel-1 IW mode VH-polarized data, the effect of NESZ could be ignored when wind speeds are greater than $15\,\,\text {m}\cdot \mathrm {s}^{-1}$ , as a better wind speed retrieval performance of these data has been recorded in this paper at wind speeds greater than $10\,\,\text {m}\cdot \mathrm {s}^{-1}$ , owing to an RMSE below $1.6\,\,\text {m}\cdot \mathrm {s}^{-1}$ and biases ranging from −0.5 to $0.5\,\,\text {m}\cdot \mathrm {s}^{-1}$. [ABSTRACT FROM AUTHOR]

This paper addresses the highly challenging problem of automatically detecting man-made structures especially buildings in very high-resolution (VHR) synthetic aperture radar (SAR) images. In this context, this paper has two major contributions. First, it presents a novel and generic workflow that initially classifies the spaceborne SAR tomography (TomoSAR) point clouds—generated by processing VHR SAR image stacks using advanced interferometric techniques known as TomoSAR—into buildings and nonbuildings with the aid of auxiliary information (i.e., either using openly available 2-D building footprints or adopting an optical image classification scheme) and later back project the extracted building points onto the SAR imaging coordinates to produce automatic large-scale benchmark labeled (buildings/nonbuildings) SAR data sets. Second, these labeled data sets (i.e., building masks) have been utilized to construct and train the state-of-the-art deep fully convolution neural networks with an additional conditional random field represented as a recurrent neural network to detect building regions in a single VHR SAR image. Such a cascaded formation has been successfully employed in computer vision and remote sensing fields for optical image classification but, to our knowledge, has not been applied to SAR images. The results of the building detection are illustrated and validated over a TerraSAR-X VHR spotlight SAR image covering approximately 39 km 2—almost the whole city of Berlin— with the mean pixel accuracies of around 93.84%. [ABSTRACT FROM AUTHOR]

This paper leads a discussion on how to form a Synthetic Aperture Radar (SAR) image without knowing the relative track. That is, within the scope of factorized geometrical autofocus (FGA). The FGA algorithm is a base-2 fast factorized back-projection (FFBP) formulation with six free geometry parameters (per subaperture pair). These are tuned step by step until a sharp image is obtained. This innovative autofocus concept can compensate completely for an erroneous geometry. The FGA algorithm has been applied successfully on two ultrawideband (UWB) data sets, acquired by the CARABAS II system at very high frequency (VHF)-band. The relative tracks are known (measured accurately). We, however, adopt and modify a basic geometry model. A linear equidistant track at fixed altitude is initially assumed. Apart from deviations due to linearization, a ~2.5-m/s along-track velocity error is also introduced. Resulting FGA images are compared to reference images and verified to be focused. This indicates that it is feasible to form a wavelength-resolution SAR image at VHF-band without support from a motion measurement system. The execution time for the examples in this paper is about five times longer with autofocus than without. Hence, the FGA algorithm is now fit for use on a regular basis. [ABSTRACT FROM AUTHOR]

Polarization orientation angle (POA) is an important parameter of polarimetric radar scattering from slopes in mountainous region. It is known that surface tilted in azimuth direction and buildings not aligned in the along-track direction induce polarization orientation shifts. Earlier research has established orientation angle as a function of radar imaging geometry and surface slopes, and that POA estimation can be derived from polarimetric radar data using circular polarization. Besides these, polarimetric scattering from steep slopes and its relation to POA remain not well understood. In this paper, we address these issues by adopting a tilted surface model based on Bragg scattering. We have found that, as the azimuthal slope increases, $\vert $ VV $\vert $ decreases at a faster rate than $\vert $ HH $\vert $ , they become equal, when POA is ±45°, and $\vert $ HH $\vert >\vert $ VV $\vert $ afterward. In other words, the Pauli component, $\vert $ HH-VV $\vert $ reduced to zero at POA = ± 45°, and the typical Bragg scattering characteristics of $\vert $ VV $\vert >\vert $ HH $\vert $ does not apply when steep slope is present inducing $\vert $ POA $\vert > 45^{\circ }$. Furthermore, the cross-pol $\vert $ HV $\vert $ does not always increase with azimuth slope but also reaches a maximum then decreases to zero. In addition, we investigate the effect of soil moisture on polarimetric SAR (PolSAR) scattering characteristics of steep terrain and the effect of vegetation over surface on POA estimation. The latter is demonstrated with NASA/JPL TOPSAR L-band PolSAR data and C-band InSAR data. Another significance of this paper is that it provides a direct and rigorous derivation of POA equations. The earlier version was derived from a different concept. [ABSTRACT FROM AUTHOR]

A generalized continuous wave synthetic aperture radar (GCW-SAR) concept is proposed in this paper. By using full-duplex radio frontend and continuous wave signaling, the GCW-SAR system can overcome a number of limitations inherent within the existing SAR systems and achieve high-resolution and wide-swath remote sensing with low-power signal transmission. Unlike the conventional pulsed SAR and the frequency-modulated continuous-wave SAR, the GCW-SAR reconstructs a radar image by directly correlating the received 1-D raw data after self-interference cancellation with predetermined location-dependent reference signals. A fast imaging algorithm, called the piecewise constant Doppler (PCD) algorithm, is also proposed, which produces the radar image recursively in the azimuth direction without any intermediate step, such as range compression and migration compensation, as required by conventional algorithms. By removing the stop-and-go assumption or slow-time sampling in azimuth, the PCD algorithm not only achieves better imaging quality but also allows for more flexible waveform and system designs. Analyses and simulations show that the GCW-SAR tolerates significant self-interference and works well with a large selection of various system parameters. The work presented in this paper establishes a solid theoretical foundation for next-generation imaging radars. [ABSTRACT FROM AUTHOR]

This paper focuses on the detection, from a stack of repeated-pass interferometric synthetic aperture radar (SAR) images, of such changes causing a target to completely lose the correlation between one epoch and another. This can be the consequence of human activities, such as construction, destruction, and agricultural activities, and also be the consequence of hazards, such as earthquake, landslides, or flooding, to buildings or terrains. The millimetric sensitivity of SAR makes it valuable for detecting such changes. This paper approaches two coherent change detection methods: a space coherent, time incoherent one and a full space and time coherent one, both based on the generalized likelihood ratiob (LR) test. A preliminary validation of the method is provided by processing two Sentinel-1 data stacks of 2016 Central Italy earthquake and by comparing the results with the map of damaged buildings in Amatrice and Accumoli made by Copernicus Emergency Management Service. [ABSTRACT FROM AUTHOR]

This paper deals with the compensation of phase miscalibration in the general context of tomographic synthetic aperture radar image focusing. Phase errors are typically independent of one acquisition to the other, thus leading to a spreading and defocusing in the multidimensional (3-D, 4-D, and 5-D) imaging space. Coping with this problem in presence of volumetric scattering is generally a complex issue. In this paper, we consider the approach for phase calibration characterized by the advantage, with respect to classical phase calibration algorithms, of not requiring either the identification of a reference target or specific assumptions about the unknown phase function, or a priori information about the terrain topography. The novelty of the proposed phase miscalibration estimation and compensation method is related to its ability to avoid unwanted and uncontrollable vertical shifts in the focused image. The estimation of the calibration phase is performed by optimizing the contrast or the entropy of the vertical profile with the constraint of a zero phase derivative. Such a constraint preserves the output height distribution. Experimental results of simulated and real data are included to demonstrate the effectiveness of the proposed method. [ABSTRACT FROM AUTHOR]

Fully polarimetric model-based decompositions are developed by accounting for the physical scattering model and experimental polarimetric SAR data acquisition processes. These decompositions offer the promising straightforward interpretation and highly improved inversion models for visualizing images of scattering scenarios optimally. However, the attempts in existing decompositions to implement the split real and imaginary components of the $T_{13}$ element of the coherency matrix have been hampered by the absence of physical models to fit the coherency matrix. In this paper, two additional physical scattering submodels are derived. The real and imaginary parts of $T_{13}$ are accounted for by implementing two newly developed physical scattering models. (One is for oriented dipole scattering and the other is for oriented quarter-wave reflection.) Furthermore, this paper is extended by implementing these physical models into a six-component scattering power model-based decomposition. To this date, the developed novel decompositions account for the maximum elements of the coherency matrix in a physical manner compared to the existing model-based decompositions. The proposed novel decomposition is tested on L-band and X-band fully polarimetric SAR data sets of the Advanced Land Observing Satellite-2/Phased Array L-band Synthetic Aperture Radar-2 and the X-band TerraSAR-X, respectively. This new decomposition produces additional two scattering submatrix components. Such scattering components are prevalent in vegetation and urban areas and even dominant over highly oriented urban scenarios. The new method enhances the truly existing double-bounce scattering contributions and reduces the overrated volume scattering from double-bounce scatterers. By comparing the results, it is found that the proposed decomposition considerably enhances the SAR image quality and its more correct visualizing presentation compared to existing decompositions. It is also found to be more robust over the oriented urban areas than the existing decompositions, resulting from the utilization of both the real and imaginary components of $T_{13}$ polarimetric information in a physical scattering manner. [ABSTRACT FROM AUTHOR]

This paper proposed a 3-D surface deformation retrieval algorithm for synthetic aperture radar interferometry (InSAR) based on a Global Navigation Satellite System (GNSS) as a transmitter and a fixed receiver (GNSS-based InSAR), where simultaneous multiple GNSS transmitters and a repeat-pass concept were adopted. This paper consists of three parts. First, the interferometric phase model under repeat-pass concept was established for both general and bistatic permanent scatterer (PS) cases in the GNSS-based InSAR. Second, the 3-D deformation retrieval algorithm was presented, and the position dilution of precision was analytically derived to evaluate the performance of measured 3-D deformation. Third, using a designed transponder onboard displacement device as the bistatic PS, the feasibility of 3-D deformation retrieval using GNSS-based InSAR was confirmed by repeat-pass experiments, where four simultaneously available Beidou-2 Inclined Geosynchronous Orbit satellites were used as transmitters, and 16 repeat-pass data sets were collected. Using the proposed algorithm, the final experimental results suggested that the GNSS-based InSAR could obtain deformation estimations with better accuracy than at 5 mm in all three directions. Thus, huge potential exists for applications such as landslide prediction and infrastructure safety monitoring. [ABSTRACT FROM AUTHOR]

Synthetic aperture sonar and synthetic aperture radar involve the creation of high-resolution images of a scene via scattered signals recorded at different locations. Each pixel of the reconstructed image includes information obtained from multiple aspects due to the changing position of the sources/receivers. In this paper, the aspect-dependent scattering at each pixel is exploited to provide additional information about the scene; this paper presents a framework for converting and utilizing multiaspect data, as well as several examples. For sonar data, as is presented here, the aspect dependence may be leveraged to separate objects of interest from the background, to understand the local bathymetry, or for visualizing acoustic shadowing in full circular synthetic aperture sonar images. Several examples of images of the seafloor containing objects of interest are presented for both circular and linear apertures. In addition, the aspect dependence of low-frequency elastic scattering from objects may be used to understand the underlying scattering physics, which is of potential use in fields such as target recognition and nondestructive testing; a laboratory example is presented. [ABSTRACT FROM AUTHOR]

Similar to the conventional squint mode synthetic aperture radar (SAR) imaging processing, the estimation of Doppler centroid is one key problem for the low-squint-mode (within the range of [−5°, 5°]) multichannel in an azimuth high-resolution and wide-swath (HRWS) SAR system. In this paper, based on the electromagnetic scattering model, a novel weighted Doppler centroid estimation approach is proposed for the multichannel in the azimuth HRWS (MC-HRWS) SAR system. First, Maxwell’s equations are employed to derive the echo model for the multichannel SAR system. Then, an improved backscattering model is presented based on the small perturbation method and the available echo model, which is adopted to produce the weights for Doppler centroid estimation. More importantly, in order to improve the precision of Doppler centroid estimation, a weighted ambiguity-free Doppler centroid estimation approach is proposed, where the range-variant characteristic of Doppler centroid is employed to resolve the ambiguity number of Doppler centroid, and the echoes from different range bins with different signal-to-noise ratios are considered. In addition, the Cramer–Rao low bound of the estimated Doppler centroid is also discussed in this paper. The effectiveness of the proposed Doppler centroid estimation approach is verified via simulated and real measured low-squint-mode MC-HRWS SAR data. [ABSTRACT FROM AUTHOR]

Tandem-L is proposed as a spaceborne synthetic aperture radar (SAR) mission developed and operated by the German Aerospace Center in cooperation with several Helmholtz research centers and the German space industries. The mission concept comprises two fully polarimetric radar satellites providing monostatic and bistatic SAR imagery. A key feature of these SAR sensors is the employment of large lightweight unfurlable mesh reflectors fed by digital feed arrays. The main advantage of this new SAR system concept is the provision of large antenna apertures in space and flexible operation via reconfigurable feed electronics. By this, it becomes possible to map, for the first time, a continuous 350-km wide swath with a 7-m azimuth resolution with excellent noise equivalent sigma zero and ambiguity suppression. This paper shall give an overview on the technical aspects of the Tandem-L SAR instrument and antenna design. In particular, after a short review of the SAR system requirements, the concept of reflector SAR systems is outlined and the operation principle is presented. General guidelines for the design of array-fed reflector antennas with application to SAR imaging are given. Then, the optimization approach of the feed array design is detailed with a specific emphasis on a fixed beamforming concept in azimuth. In this context, also the problem of cross-pol pattern mitigation is addressed. These optimization steps are shown to be crucial for achieving the performance requirements in quad-pol acquisitions. Beamforming in elevation is performed onboard the spacecraft via digital hardware. This paper presents the beamforming architecture on receive for Tandem-L, which would apply in general for instance also to planar multielevation beam SAR antennas with Scan-On-Receive capabilities. Tandem-L is operated as a staggered SAR, which means varying the pulse repetition interval from pulse to pulse. In this context, the major design challenges are presented. Moreover, the impact of pulse staggering on the imaging performance is discussed. Tandem-L’s SAR performance is presented by means of numerical simulations showing that the performance requirements imposed by the scientific user community could be met. The final part of this paper addresses options for high azimuth resolution imaging as well as a beamforming method for enhanced range ambiguity suppression. [ABSTRACT FROM AUTHOR]

This paper proposes a novel method based on deformable dictionary learning for detecting the regions of change between multitemporal image pairs. We build on our previous work, which constructed a pair of dictionaries. The main shortcoming of this method was its dependence on a large amount of training data. In practice, there is often a shortage of ground-truthed training images, which limits the expression capability of the resulting dictionaries. This paper overcomes this challenge by incorporating the concept of deformation, wherein each atom of a dictionary is no longer a simple image patch, but instead is a flexible image deformation function. This enables the creation of more expressive dictionaries, capable of generalizing to a far greater variety of image patterns, while using a far smaller amount of ground-truthed images for supervised dictionary training. Deformation similarity is employed for patch matching to find the best set of atoms in the difference image (DI) dictionary for reconstructing image patches for a new input DI. Each such atom can be deformed to achieve a better match, thus extending generality while reducing the number of atoms needed in the dictionary. Multiple deformed atoms are weighted and combined to best reconstruct the input DI patch. Then, the same set of deformations and weights is projected to the corresponding atoms in the CD dictionary to obtain the output change-detection map. Experiments in six realistic synthetic aperture radar data sets demonstrate the robustness and efficiency of the proposed method in comparison with five other state-of-the-art methods from the literature. [ABSTRACT FROM AUTHOR]

Permanent scatterer interferometry is a multitemporal interferometric synthetic aperture radar technique that produces high-accuracy ground deformation measurement. A high density of permanent scatterer (PS) is required to provide accurate results. In natural environments with low PS density, distributed scatterers (DSs) could serve as additional coherent observations. This paper introduces a polarimetric scattering property-based adaptive filtering method that preserves PS candidates and filters DS candidates. To further increase the coherence estimate of DS candidates, the technique includes a complex coherence decomposition that adaptively selects the most stable scattering mechanisms, thus improving pixel coherence estimation. The proposed method was evaluated on 11 quad-polarized ALOS PALSAR images and 21 dual-polarized Sentinel-1 images acquired over San Fernando Valley, CA, USA, and Groningen, The Netherlands, respectively. The application of this method increased the number of coherent pixels by almost a factor of eight compared with a single-polarization channel. This paper concludes that a coherence estimate can be significantly improved by applying scattering property-based adaptive filtering and coherence matrix decomposition and accurate displacement measurements can be achieved. [ABSTRACT FROM AUTHOR]

It has been previously demonstrated that it is possible to perform remote vibrometry using synthetic aperture radar (SAR) in conjunction with the discrete fractional Fourier transform (DFrFT). Specifically, the DFrFT estimates the chirp parameters (related to the instantaneous acceleration of a vibrating object) of a slow-time signal associated with the SAR image. However, ground clutter surrounding a vibrating object introduces uncertainties in the estimate of the chirp parameter retrieved via the DFrFT method. To overcome this shortcoming, various techniques based on subspace decomposition of the SAR slow-time signal have been developed. Nonetheless, the effectiveness of these techniques is limited to values of signal-to-clutter ratio ≥5 dB. In this paper, a new vibrometry technique based on displaced-phase-center antenna (DPCA) SAR is proposed. The main characteristic of a DPCA-SAR is that the clutter signal can be canceled, ideally, while retaining information on the instantaneous position and velocity of a target. In this paper, a novel method based on the extended Kalman filter (EKF) is introduced for performing vibrometry using the slow-time signal of a DPCA-SAR. The DPCA-SAR signal model for a vibrating target, the mathematical characterization of the EKF technique, and vibration estimation results for various types of vibration dynamics are presented. [ABSTRACT FROM AUTHOR]

This paper addresses the performance in the retrieval of 3-D mean deformation maps by exploiting simultaneous or quasi-simultaneous squinted synthetic aperture radar (SAR) interferometric acquisitions in a repeat-pass scenario. In multisatellite or multibeam low earth observation missions, the availability of two (or more) lines of sight (LOSs) allows the simultaneous acquisition of SAR images with different squint angles, hence improving the sensitivity to the north–south component of the deformation. Due to the simultaneity of the acquisitions, the troposphere will be highly correlated and, therefore, will tend to cancel out when performing the differential measurement between the interferograms obtained with the different LOSs, hence resulting in a practically troposphere-free estimation of the along-track deformation measurement. In practice, however, the atmospheric noise in the differential measurement will increase for increasing angular separations. This paper expounds the mathematical framework to derive the performance by properly considering the correlation of the atmospheric delays between the simultaneous acquisitions. To that aim, the hybrid Cramér–Rao bound is exploited making use of the autocorrelation function of the troposphere. Some performance examples are presented in the frame of future spaceborne SAR missions at C and L band. [ABSTRACT FROM AUTHOR]

Focusing on open forests and woodlands within the Injune Landscape Collaborative Project research area in central southeast Queensland, Australia, and using dual-pol (HH and HV) ALOS PALSAR repeat-pass InSAR data (temporal baseline of 92 days), this paper explores the detection of forest disturbance from the spaceborne repeat-pass InSAR correlation magnitude by developing a simple and efficient forest disturbance detection approach. In particular, a generic physical InSAR scattering model is derived by accounting for the forest disturbance information as well as the normal temporal decorrelation effects that are later compensated for using the modified Random Volume over Ground model. Based on the generic model, a quantitative indicator of forest disturbance is retrieved, namely, disturbance index that varies from 0 (no disturbance) to 1 (complete deforestation). This index is compared with that identified using a time series of Landsat sensor data over a selective logging area and has a relative root mean square error of 13% at a spatial resolution of 0.8 ha. This paper highlights the use of the co-pol InSAR correlation magnitude for forest disturbance detection, which serves as a complimentary application to using the cross-pol counterpart for forest height inversion in a companion work. Given the global availability of this type of data (e.g., Japanese Aerospace Exploration Agency’s ALOS-1/2 and NASA-ISRO’s NISAR), the method is anticipated to contribute to the range of tools being developed for large-scale forest disturbance assessment and monitoring. [ABSTRACT FROM AUTHOR]

The AisaOWL thermal hyperspectral instrument, manufactured by Specim, is a relatively new push-broom sensor well suited to airborne environmental surveys. The sensor covers the 7.6-12.6 μm part of the long-wave infrared region with 102 continuous bands, and is capable of imaging in low-light conditions. The detector array is a mercury cadmium telluride (MCT) semiconductor, which has an inherent randomly varying dark current for random pixels. This manifests in the raw data as a pixel switching between different intensity levels. These pixels are termed "blinkers" by the manufacturer. For each data acquisition, the pixels need to be tested for blinking behavior as different pixels are affected during each acquisition. However, little is known about the number of blink events, the duration of frames, or the optimal length of data acquisition. This paper presents the characterization of the blinking nature of pixels in the MCT detector array to provide guidance on data acquisition and processing. This paper finds that blinking behavior is not completely random, with some pixels more prone to blinking behavior than others. Most blinking pixels have only a few short blinks; therefore, there is still a considerable amount of good data in a blinking pixel. [ABSTRACT FROM AUTHOR]

Multiple-input multiple-output synthetic aperture radar (MIMO SAR) system has drawn considerable attention because of its extra degrees of freedom for high resolution and wide swath compared with the traditional multichannel SAR system. But how to extract the matched signal without the unmatched interferences is the foremost task for MIMO SAR system. In this paper, by using the orthogonal frequency division multiplexing chirp signals as the transmitted signals, it is demonstrated that the robust principal component analysis (RPCA) method can be successfully employed for ground moving target indication (GMTI) with no need for separating the matched signal and unmatched interferences. It is because the unmatched interference is proven to have low-rank property and noise-level magnitude, which can be separated apart from the matched signal with the RPCA method. However, the traditional RPCA methods may be restricted by the high computational burden due to the complex decompositions and multiple iterations. Hence, a fast interferometry RPCA method is proposed specially for GMTI mode, which takes full advantage of the characteristics of along-track interferometry SAR system. It can improve the probability of detection under low signal-to-clutter-and-noise ratio. Additionally, it will dramatically shorten the computational time. Furthermore, the proposed method can also estimate the radial velocities of the moving targets simultaneously. The results by applying the proposed method into a set of real SAR data are consistent with the analysis presented in this paper. [ABSTRACT FROM AUTHOR]

In this paper, the synthetic aperture radar (SAR) calibration for low-frequency missions by means of stable point targets is presented. Calibration at low frequency involves the absolute radiometric calibration, the antenna pattern and pointing characterization and validation, and the distortion system parameters' estimation. The use of traditional instrumentation, such as a polarimetric active radar calibrator, a corner reflector, or an active transponder, may be costly and can reduce the time the instrument is used for operational acquisitions. The purpose of this paper is to evaluate the potentiality in calibration of point targets for which the radar cross section and the time stability have been characterized. Given a calibration site, once that a set of the stable point targets have been detected by the analysis of an interferometric stack of SAR acquisitions, they may be used as passive calibrators for the validation of radiometry, elevation antenna pattern, and pointing estimation. We show that, although less targets are expected to be found in P- or L- band than in C- or X-band, a sufficient amount (about 250 targets per acquisition) can provide an accuracy in antenna pattern estimation of about 0.04 dB, if the target accuracy is 0.1 dB at 1◝. [ABSTRACT FROM AUTHOR]

In this paper, with respect to multichannel synthetic aperture radar (SAR), we first formulate the problems of Doppler ambiguities on the radial velocity (RV) estimation of a ground moving target in the range-compressed domain, the range-Doppler domain, and the image domain, respectively. It is revealed that in these problems, the cascaded time-space Doppler ambiguity (CTSDA) may arise; that is, the time domain Doppler ambiguity in each channel arises first and then the spatial domain Doppler ambiguity among multichannels arises second. Accordingly, the multichannel SAR systems with different parameters are investigated in three cases with different Doppler ambiguity properties. Then, a multifrequency SAR is proposed for the RV estimation by solving the ambiguity problem based on the Chinese remainder theorem (CRT). In the first two cases, the ambiguity problem can be solved by the existing closed-form robust CRT. In the third case, it is found that the problem is different from the conventional CRT problem and we call it a double remaindering problem in this paper. We then propose a sufficient condition under which the double remaindering problem, i.e., the CTSDA, can also be solved by the closed-form robust CRT. When the sufficient condition is not satisfied, a searching-based method is proposed. Finally, some results of numerical experiments are provided to demonstrate the effectiveness of the proposed methods. [ABSTRACT FROM AUTHOR]

This paper presents the first experimental demonstration of the virtual bandwidth synthetic aperture radar (VB-SAR) imaging scheme. VB-SAR is a newly developed subsurface imaging technique which, in stark contrast to traditional close proximity ground penetrating radar schemes, promises imaging from remote standoff platforms such as aircraft and satellites. It specifically exploits the differential interferometric SAR (DInSAR) phase history of a radar wave within a drying soil volume to generate high-resolution vertical maps of the scattering through the soil volume. For this study, a stack of C-band vertically polarized DInSAR images of a sandy soil containing a buried target was collected in the laboratory while the soil moisture was varied--first during controlled water addition, and then during subsequent drying. The wetting image set established the moisture-phase relationship for the soil, which was then applied to the drying DInSAR image set using the VB-SAR scheme. This allowed retrieval of high-resolution VB-SAR imagery with a vertical discrimination of 0.04 m from a stack of 1-m vertical resolution DInSAR images. This paper unequivocally shows that the basic principles of the VB-SAR technique are valid and opens the door to further investigation of this promising technique. [ABSTRACT FROM AUTHOR]

Polarimetric coherence, which has the potential to reveal physical properties of scatterers, is an important source for polarimetric synthetic aperture radar (PolSAR) data investigation. Target structure and orientation relative to the PolSAR illumination direction are key factors affecting the polarimetric coherence degree. The relative orientation between a sensor and a target can be adjusted using the rotating processing along the radar's line of sight. The main idea of this paper is to extend the traditional polarimetric coherence at a given rotation state (θ = 0) to the rotation domain (θ ∈ [-π, π)) along the radar's line of sight for hidden information exploration. A visualization and characterization tool named as a polarimetric coherence pattern for two arbitrary polarization channels is proposed and developed. This interpretation tool is able to view the variation of polarimetric coherence in the rotation domain containing rich orientation diversity information which is seldom considered. A set of characterization features are derived to completely describe a polarimetric coherence pattern thereafter. Experimental studies with unmanned aerial vehicle SAR (UAVSAR) PolSAR data over crop areas have validated that polarimetric coherence patterns vary in terms of polarization combinations and crop types. The proposed characterization features show good potential to differentiate polarimetric responses from different land covers. Furthermore, a classification scheme combining the selected proposed features and the commonly used roll-invariant features is developed for quantitative and application investigation. Comparison studies with both UAVSAR and Airborne SAR (AIRSAR) data clearly demonstrate the superiority of the proposed classification to the conventional classification with only roll-invariant features. The overall classification accuracies for the seven and eleven land covers of UAVSAR and AIRSAR data are, respectively, increased from 90.21% and 93.87% to 95.12% and 94.63% by the proposed classification scheme. This paper also demonstrates the importance of and potential for utilizing the complementary advantages of roll-invariant features and the proposed roll-variant features. [ABSTRACT FROM AUTHOR]

Polarimetric synthetic aperture radar (PolSAR) image classification is a vital application in remote sensing image processing. In general, PolSAR image classification is actually a high-dimensional nonlinear mapping problem. The methods based on sparse representation and deep learning have shown a great potential for PolSAR image classification. Therefore, a novel PolSAR image classification method based on multilayer projective dictionary pair learning (MDPL) and sparse auto encoder (SAE) is proposed in this paper. First, MDPL is used to extract features, and the abstract degree of the extracted features is high. Second, in order to get the nonlinear relationship between elements of feature vectors in an adaptive way, SAE is also used in this paper. Three PolSAR images are used to test the effectiveness of our method. Compared with several state-of-the-art methods, our method achieves very competitive results in PolSAR image classification. [ABSTRACT FROM PUBLISHER]

This paper presents a whole new method for simulating a raw signal of synthetic aperture radar (SAR) with trajectory deviation. In this paper, a SAR raw signal is viewed as a spatial function in terms of radar location, at a fixed range frequency component of the radar signal. It is disclosed and verified that the SAR raw signals is band limited from the perspective of spatial spectrum analysis. Based on this finding, SAR raw signals under condition of trajectory deviation are obtained by interpolating the SAR raw signal along a set of ideally linear trajectories. The unprecedent performance achieved by the new method mainly includes the following. First, it provides a way to update existing simulators designed for ideally linear trajectory, giving them the capability to take trajectory deviation into consideration. Second, it is an efficient SAR raw signal simulator whose validity limit is greatly expanded compared with existing efficient simulators, as many constraints are eliminated without sacrificing computational efficiency or phase accuracy. Third, it is a uniform framework applicable for multiple SAR acquisition modes. Finally, the computational complexity of Monte Carlo experiment under various trajectory deviations is dramatically reduced, at the expense of storage memory requirement. Theoretical analyses are demonstrated by experimental results. [ABSTRACT FROM PUBLISHER]

The National Aeronautics and Space Administration’s Soil Moisture Active Passive (SMAP) mission, launched in January 2015, was designed to provide a global soil moisture product at medium resolution (~9 km), by combining observations from its radar and radiometer. Several downscaling methods have been proposed by the SMAP team for this purpose. This paper evaluates another candidate downscaling method, namely, the Bayesian merging approach. While this has been tested using a synthetic data set across the USA, it is imperative that it can also be tested using the experimental data for a comprehensive range of land surface conditions (i.e., in different hydro-climatic regions) prior to a global application. Consequently, this paper applies this method using the data collected from SMAP experiments field campaigns in south-eastern Australia that closely simulated the SMAP data stream for a single SMAP radiometer pixel over a three-week interval. The method studied here differs from the linear downscaling methods of the SMAP mission, in that it uses a nonlinear method based on Bayes’ theorem. The medium-resolution soil moisture product is obtained using background soil moisture estimates that are updated according to the difference between the observed and predicted brightness temperatures and backscatter coefficients, relating the high- and low-resolution data. Results were assessed against a reference soil moisture map derived from high-resolution airborne radiometer observations. The root-mean-square-error and R^2 for the Bayesian merging method were found to be 0.02 cm3/cm3 and 0.55, respectively, at 9-km resolution, being similar to the SMAP’s “optional” downscaling method. [ABSTRACT FROM PUBLISHER]

This paper deals with the issue of ground moving target imaging and motion parameter estimation with an airborne dual-channel circular stripmap synthetic aperture radar (CSSAR) system. Although several methods of ground moving target motion parameter estimation have been proposed for the conventional airborne linear stripmap SAR, they cannot be applied to airborne CSSAR because the range history of a ground moving target for airborne CSSAR is different than that for airborne linear stripmap SAR. In this paper, the moving target’s range history for airborne dual-channel CSSAR and the target signal model after the displaced phase center antenna processing are derived, and a new ground moving target imaging and motion parameter estimation algorithm is developed. In this algorithm, the estimation of baseband Doppler centroid and its compensation are first performed. Then focusing is implemented in the 2-D frequency domain via phase multiplication, and the target is focused in the SAR image without azimuth displacement due to the compensation of the Doppler shift caused by its motion. Finally, the target’s motion parameters are estimated with its Doppler parameters and its position in the SAR image. Numerical simulations are conducted to validate the derived range history and the performance of the proposed algorithm. [ABSTRACT FROM PUBLISHER]

This paper critically analyzes several incoherent model-based decomposition methods for assessing the effect of deorientation in characterization of various land covers. It has been found that even after performing decomposition, ambiguity still occurs in scattering response from various land covers, such as urban and vegetation. Researchers introduced the concept of deorientation to remove this ambiguity. Therefore, in this paper, a critical analysis has been carried out using seven different three- and four-component decomposition methods with and without deorientation and two Eigen decomposition-based methods to investigate the scattering response on various land covers, such as urban, vegetation, bare soil, and water. The comprehensive evaluation of decomposition and deorientation effect has been performed by both visual and quantitative analyses. Two types of quantitative analysis have been performed; first, by observing percentage of scattering power and second, by analyzing the variation in the number of pixels in different land covers for each scattering contribution. The analysis shows that deorientation increases not only the power but also the number of pixels for surface and double bounce scattering. The number of pixels representing volume scattering remain almost the same for all the methods with or without deorientation, whereas volume scattering power reduces after deorientation. Eigen decomposition-based methods are observed to solve the problem of overestimation of volume scattering power. [ABSTRACT FROM PUBLISHER]

In this paper, we propose a feature-tracking algorithm for sea ice drift retrieval from a pair of sequential satellite synthetic aperture radar (SAR) images. The method is based on feature tracking comprising feature detection, description, and matching steps. The approach exploits the benefits of nonlinear multiscale image representations using accelerated-KAZE (A-KAZE) features, a method that detects and describes image features in an anisotropic scale space. We evaluated several state-of-the-art feature-based algorithms, including A-KAZE, Scale Invariant Feature Transform (SIFT), and a very fast feature extractor that computes binary descriptors known as Oriented FAST and Rotated BRIEF (ORB) on dual polarized Sentinel-1A C-SAR extra wide swath mode data over the Arctic. The A-KAZE approach outperforms both ORB and SIFT up to an order of magnitude in ice drift. The experimental results showed high relevance of the proposed algorithm for retrieval of ice drift at subkilometre resolution from a pair of SAR images with 100-m pixel size. From this paper, we found that feature tracking using nonlinear scale-spaces is preferable due to its high efficiency against noise with respect to image features compared with other existing feature tracking alternatives that make use of Gaussian or linear scale spaces. [ABSTRACT FROM PUBLISHER]

Conventionally, a single-channel synthetic aperture radar (SC-SAR) system can hardly detect weak moving targets simply. In this paper, a time-Doppler chirp-varying (TDCV) filter is proposed for ground moving target indication and parameter estimation with the airborne SC-SAR system. The proposed method is easy to implement and mainly includes three steps. First, a traditional 2-D frequency range-Doppler algorithm is used to generate an original image. Second, the second-order range cell migration (RCM) phase term is partly compensated in the range frequency and azimuth time domain, and the rest of second-order RCM phase term is compensated in 2-D frequency domain. The whole processing, which is referred to as the TDCV approach, is employed to acquire a new TDCV image. Third, compared the original image with the new image, the clutter scatterers are nearly motionless while the moving targets are translated along the range direction due to their nonzero radial velocities. After the cancellation between two normalized images, the clutter background would be significantly suppressed since the two images generated by the same data. As a result, the moving targets can be indicated and the range difference of the moving target between two images can be exploited to estimate their radial velocities. The results obtained by applying the proposed method into a set of real SAR data are consistent with the analysis presented in this paper. [ABSTRACT FROM PUBLISHER]

This paper proposes a multi-scale rotation-invariant haar-like (MSRI-HL) feature integrated convolutional neural network (MSRIHL-CNN)-based ship detection algorithm of the multiple-target environment in synthetic aperture radar (SAR) imagery. Usually, ship detection includes preprocessing, prescreening, discrimination, and classification. Among them, prescreening and discrimination are the most two important stages so that they catch great intention. Based on our previous work, we propose a truncated-clutter-statistics-based joint, constant false alarm rate (CFAR) detector (TCS-JCFAR) for ship target prescreening in the multiple-target environment. TCS-JCFAR greatly enhances the prescreening rate in the multiple-target environment while achieving a low observed FAR. In the discrimination stage, conventional CNN extracts the deep features (high-level features); however, it will lose the local texture and edge information (low-level features) which are of great significance for target discrimination. Hence, the MSRI-HL features are used to represent the multi-scale, rotation-invariant texture, and edge information that conventional CNN fails to capture. The extracted low-level MSRI-HL features and the high-level deep features are optimally fused to a multi-layered feature vector. Finally, the multi-layered feature vector is fed into a typical support vector machine (SVM) classifier for ship target discrimination. The proposed MSRIHL-CNN combines the low-level texture and edge features and the high-level deep features; moreover, they are optimally fused to fully represent the ship targets. Undoubtedly, MSRIHL-CNN has better discrimination performance. The superiority of the proposed TCS-JCFAR-based prescreener and MSRIHL-CNN-based discriminator is validated on the Chinese Gaofen-3 SAR imagery. [ABSTRACT FROM AUTHOR]

This paper proposes a fast target indexing method based on target geometric models and further conceives a forward method based coarse-to-fine hierarchical synthetic aperture radar (SAR) automatic target recognition (ATR) system. The proposed fast SAR target indexing method is employed for coarse classification before the implementation of fine classification and recognition, resulting in significant acceleration of target recognition. Furthermore, the fast SAR target indexing method is purely based on target geometric models without resorting to any time-consuming electromagnetic (EM) computation, which enables the online and real-time classification. The binary target region and shadow region are selected as the indexing features, and a forward feature prediction method based on optical visibility is developed to predict the features from the target geometric model in real time. Then, the features extracted from the testing SAR image are aligned with the predicted features to establish correlation ship and a fused similarity based on four types of complementary similarity criteria is designed to further implement target indexing. The effectiveness of the proposed fast SAR target indexing method is demonstrated by using the MSTAR dataset. [ABSTRACT FROM AUTHOR]