Search

Nominal grid data of geostationary remote sensing satellites are fundamental for generating the subsequent products. It can be obtained by normalized projection models, mainly based on the imaging mode. However, there are only definitions and primary descriptive equations for the normalized geostationary projection (NGP) model in the existing literature, while the corresponding imaging mode and the physical interpretation are missing, thus hindering the understanding of the produced nominal grid dataset as well as the subsequent products based on the grid. This paper first derived the imaging mode for NGP based on the limited literature. In addition, another new imaging mode was introduced and analyzed based on NGP. The corresponding projection model [nonstandard normalized geostationary projection (NNGP)] was proposed, which is entirely consistent with the situation of America’s Geostationary Operational Environmental Satellite-R Series (GOES-R) and Chinese Fengyun-4A (FY-4A). Furthermore, this paper proposed a novel nominal projection model for frame imaging, which is consistent with the imaging mode of China’s Gaofen-4. Finally, extensive experiments were designed to comparatively analyze the three nominal grids and demonstrate a detailed difference. By providing a theoretical basis for nominal grid selection, this research is highly significant for the efficient near-real-time production and further applications of geostationary images, as well as the conversion between different datasets resulting from different nominal grid data. In addition, our models are sufficiently tested during the on-orbit running of FY-4A, the first satellite of China’s second-generation three-axis stabilized geostationary meteorological satellite series. The algorithms provide the technical support for the high-precision image navigation and registration and play a significant role in robustly producing the meteorological data with similar quality to those from GOES-R. [ABSTRACT FROM AUTHOR]

GaoFen1 is the first high-resolution earth observation satellite built in China, and carries four wide field-of-view (WFV) cameras to achieve large-scale monitoring and mapping. However, the unstable attitude measurement accuracy of the satellite generally imparts low geopositioning accuracy and inconsistent geometric error in overlapping areas of WFV images. A feasible and effective large-scale planar block adjustment (PBA) method is presented that corrects the geometric errors of the vast WFV images integrally, further improving the geometric accuracy of these images. In addition, whether ground control points (GCPs) are needed, and the effect of different numbers of GCPs on PBA accuracy is also investigated. Two key technologies are used in this paper. First, a universal PBA error equation based on the virtual control points is presented to allow PBA with or without GCPs. Second, an adjustment method aided by a digital elevation model is adopted to overcome the weak convergence geometry among WFV images, further ensuring stable estimation of PBA. The effectiveness of the proposed method was verified by 664 WFV images covering most of mainland China. The satisfactory experimental results indicate that the method presented herein is reasonable and effective, but that a certain number of GCPs is needed to ensure the accuracy of large-scale PBA results for WFV images. [ABSTRACT FROM AUTHOR]

Due to the rapid urbanization of China, many villages in the urban fringe are enveloped by ever-expanding cities and become so-called urban villages (UVs) with substandard living conditions. Despite physical similarities to informal settlements in other countries (e.g., slums in India), UVs have access to basic public services, and more importantly, villagers own the land legitimately. The resulting socio-economic impact on urban development attracts increasing interest. However, the identification of UVs in previous studies relies on fieldwork, leading to late and incomplete analyses. In this paper, we present three scene-based methods for detecting UVs using high-resolution remotely sensed imagery based on a novel multi-index scene model and two popular scene models, i.e., bag-of-visual-words and supervised latent Dirichlet allocation. In the experiments, our index-based approach produced Kappa values around 0.82 and outperformed conventional models both quantitatively and visually. Moreover, we performed multitemporal classification to evaluate the transferability of training samples across multitemporal images with respect to three methods, and the index-based approach yielded best results again. Finally, using the detection results, we conducted a systematic spatiotemporal analysis of UVs in Shenzhen and Wuhan, two mega cities of China. At the city level, we observe the decline of UVs in urban areas over the recent years. At the block level, we characterize UVs quantitatively from physical and geometrical perspectives and investigate the relationships between UVs and other geographic features. In both levels, the comparison between UVs in Shenzhen and Wuhan is made, and the variations within and across cities are revealed. [ABSTRACT FROM PUBLISHER]

Ziyuan1-02C (ZY1-02C) was launched on December 22, 2011, and it is the first civilian high-resolution remote sensing satellite in China. However, the limited precision of the onboard attitude measurement system causes many errors during attitude transfer by ZY1-02C. Thus, there are complex distortions in the images obtained by ZY1-02C, which restricts its application greatly. In this paper, we consider the feasibility of attitude error correction based on parallel observations with high-resolution cameras, and the method is described in detail. To validate the efficiency of the proposed method, several images and corresponding control data were collected from the Henan, Taihang Mountain, Neimeng, and Taiyuan areas in China. The experimental results indicate that seamless mosaic images without distortion can be obtained using our method. Furthermore, the positioning accuracy with a few ground control points (GCPs) was shown to be better than 1.5 pixels and equivalent to the accuracy of the GCPs. [ABSTRACT FROM PUBLISHER]

The space environment monitor (SEM), onboard the Chinese meteorological satellites FengYun-3A/B, has the abilities to measure proton flux in 3-300-MeV energy range and electron flux in 0.15-5.7-MeV energy range. SEM can also detect the heavy ion compositions, satellite surface potential, the radiation dose in sensors, and the single events. The space environment information derived from SEM can be utilized for satellite security designs, scientific studies, development of radiation belt models, and space weather monitoring and disaster warning. In this paper, the SEM's instrument characteristics are introduced, and the postlaunch calibration algorithm is presented. The applications in monitoring space weather events and the service for manned spaceflights are also demonstrated. [ABSTRACT FROM AUTHOR]

This paper addresses the estimation of adjacency effect in ground spectrum and Landsat-5 pixels. The adjacency effect influences the digital number value of a pixel by adding surface surrounding scatter signals and path scatter signals at the sensor. Along with the increasing use of satellite high-resolution imagery and quantitative remote sensing, much attention has been paid to the experimental measurement and estimation of the natural phenomena of adjacency effects. Based on the theory of radiation transfer, a procedure was designed to measure the reflectance from the surface target materials and the materials in a box which is 1.5 m above the surface to avoid upwelling reflectance. At every 3 × 3 sites, the measurement was carried out during 10:30 to 13:30 of local time at the Guanting Remote Sensing Test Site in north Beijing. The results show that the adjacency effect becomes stronger from visible, near infrared to shortwave infrared wavelength; the adjacency effect weakens with the increase of distance between testing site. At last, the adjacency effect of Landsat-5 image was corrected, and the quality of the resulting image was improved. [ABSTRACT FROM AUTHOR]

High-frequency (HF) radar can be employed to measure sea surface state parameters such as waveheight, wind field, and surface current velocity. This paper describes the application of the HF ground wave radar in remote sensing the surface conditions over the Eastern China Sea in October 2000. The radar, referred to as the OSMAR2000, was developed by Wuhan University. Preliminary wave spectra, waveheights, and wind fields estimated from the collected data are presented and compared with ship-recorded measurements where such are available. The range for wind direction sensing is up to 200 km. Wave information and wind speed can be provided up to a range of 120 km. The mean difference between radar- and ship-measured significant waveheight is 0.323 m; wind direction is measured within 20°; and wind speed to within 0.6 m/s. With such agreement being fairly reasonable, the feasibility of the inversion algorithm and the ocean state real-time sensing capability of OSMAR2000 are demonstrated. [ABSTRACT FROM AUTHOR]