Search

As a typical application of remote sensing technology, change detection can find the ground information changes by acquiring the images of the same region at different times. The change detection using the synthetic aperture radar (SAR) with the advantages of all day and all-weather usually monitors the significant surface change, such as flood disasters and earthquake deformation. However, when it comes to detecting subtle changes such as vehicle traces, the traditional methods ignoring the phase coherence between image pairs cannot intensify these faint changes in the difference image. The SAR coherent change detection (CCD) based on repeat-pass repeat-geometry complex images utilizing both the intensity and phase fraction could exhibit the subtle vehicle trace in the difference image. However, the complicated background and decorrelation factors significantly affect the quality of difference images, further causing great trouble for automatic trace detection. This article proposes the spatial feature enhanced Unet and adaptive data augmentation to realize vehicle trace detection. More specifically, the pseudocolor image is first synthesized based on a two-stage coherence estimation method. Then, considering the long-continuity and parallel distribution of vehicle trace samples, the enhanced Unet is constructed by fusing spatial convolutional neural network and spatial attention mechanism. After that, the adaptation data augmentation strategy is presented by introducing manual registration errors and multiple estimation windows. Finally, the experimental results on the Sandia CCD data and our measured data demonstrate the effectiveness of the proposed method. [ABSTRACT FROM AUTHOR]

The nonlinear variation of viewing angles over a long duration causes a nonlinear initial phase of the received pulse in a passive positioning system with a single moving receiver. Typical positioning systems ignore the phase and perform incoherent accumulation of the long-time data, thus resulting in a decrease in positioning accuracy, especially at a low signal-to-noise ratio (SNR). A novel passive positioning system with a synthetic aperture technique, named synthetic aperture positioning (SAP) system, is proposed to resolve the issue. First, a new 2-D continuous sampling working model is proposed. Then, the SAP system and a cost function are given to analyze the positioning performance. Third, a positioning algorithm based on the maximum likelihood estimation (MLE) is studied to handle the cost function and position the emitter. Simulation and experimental results verify the validity and effectiveness of the proposed SAP system. [ABSTRACT FROM AUTHOR]

The microwave photonic (MWP) radar has the capability of generating ultrawideband (UWB) signals. It is a challenge to realize accurate extraction of attributed scattering centers (ASCs) from MWP signals. This manuscript presents a scattering parameter estimation method in the image domain for UWB MWP signals. The polar-to-rectangular resampling is required for UWB MWP signals. Therefore, a range-azimuth decoupled representation based on the ASC model is formed. The model parameter estimation is converted into an optimization problem, where the statistics of the target signal and the features of interest are modeled to provide prior information. The distribution spread maximization (DSM) and peak magnitude maximization (PMM) principles in the optimization embody this prior information. The particle swarm optimization (PSO) is utilized to search for the parameters of each ASC in the image domain. Moreover, the orthogonal matching pursuit (OMP) algorithm is introduced to avoid repeated computation. Experimental results conducted on the simulated data, XPATCH data, and real data confirm the effectiveness of the proposed method. The proposed method takes into account the specific features of UWB MWP signals, which are neglected in the existing studies. Therefore, the proposed method performs better in extracting ASC parameters from UWB MWP signals in terms of accuracy and more complete sets. [ABSTRACT FROM AUTHOR]

For ultrahigh resolution synthetic aperture radar (SAR), azimuth spectrum aliasing limits the application of frequency-domain autofocus algorithms. Therefore, time-domain autofocus algorithms are often used for ultrahigh resolution SAR imaging. However, the azimuth deramping operation in current time-domain autofocus algorithms may introduce an additional azimuth-dependent phase. This phase can be regarded as a part of the phase error, which significantly reduces the estimation accuracy of the phase error. To address this issue, this article proposes a new time-domain autofocus algorithm based on azimuth scaling transformation (AST) for ultrahigh resolution SAR. In this algorithm, we first adopt the azimuth scaling operation to avoid the azimuth-dependent phase so that the estimation accuracy of error can be greatly improved. Then, for the azimuth-dependent shifts caused by the azimuth scaling operation, we adopt the alignment processing to remove them in azimuth-time domain. Finally, we can estimate the error accurately from the aligned signal. The simulation and measured data were processed to verify the effectiveness of the algorithm. [ABSTRACT FROM AUTHOR]

Due to the constraint of minimum antenna area, 2-D ambiguity resolving is a challenging task in ship focusing of single-channel SAR mounted on high-speed maneuvering platforms. In order to accommodate the issues, a ship focusing and positioning algorithm based on 2-D ambiguity resolving is proposed. First, we analyze the constraint of minimum antenna area and the distribution of the 2-D ambiguity area. An optimal-PRF SAR concept is proposed, where the signal ambiguity is evenly distributed to the range and azimuth directions. In this concept, the timing sequence of the orthogonal phase-coded waveform is designed to make the target echoes in different regions orthogonal. Then, an orthogonal matching filter is used to suppress the signal energy in range ambiguity regions. Aiming at the target defocus and position shift caused by the Doppler ambiguity, we propose an azimuth ambiguity resolving method. The Doppler ambiguity number can be estimated by residual envelope inclination. Subsequently, the target can be relocated and accurately focused by the estimated Doppler parameters. After the operation of each target is completed, the focusing SAR image of the whole scene can be obtained. Finally, simulation results and real data processing are presented to validate the proposed algorithm. [ABSTRACT FROM AUTHOR]

As an important remote sensing means, synthetic aperture radar (SAR) has many superiorities to other sensors. How to effectively detect and locate ships in SAR images is also a popular field. In previous ship detection research, most algorithms focus on detecting the horizontal bounding box of ship targets, which ignore the rotation angle of each ships. Thus, too much background noise in the horizontal detection results makes them difficult to describe each ship accurately. Inspired by the powerful feature representation ability of convolutional neural networks (CNNs), a novel anchor-free and keypoint-based deep learning method is proposed for oriented ship detection in multiresolution SAR images. Our detector first extracts multilevel features from the input SAR image with a backbone network and feature pyramid network. Next, considering multiscale ships in multiresolution SAR images, we detect different sizes of ships on different levels of feature maps with identical head network structures. In each head network, the classification subnetwork determines each pixel in feature maps as the central pixel of this ship or not, and the regression subnetwork regresses the oriented bounding box for each ship. In the training process, the proposed oriented nonnormalized Gaussian function is used to describe the center point of ship targets, while the nonuniform weighting of the different level loss functions is used to suppress the imbalanced sample distribution. Experimental results on two authoritative SAR-oriented ship detection datasets and two Gaofen-3 images demonstrate the effectiveness and robustness of the proposed methods. [ABSTRACT FROM AUTHOR]

With the ability to locate subtle trace objects in the large-scale region, coherent change detection (CCD) has been vital research for a synthetic aperture radar (SAR) system. Finding the difference between repeat-pass repeat-geometry SAR image pair and extracting impressive trace pixels from difference image, the SAR CCD methods consist of a difference generation module and a difference analysis module. The previous CCD methods mainly pay attention to devising a sophisticated working system or an appropriate statistic model to generalize a well difference image. In this article, we introduce the deep learning method into the CCD algorithm and propose a novel trace detection paradigm, which works by hierarchically fusing the unsupervised coherent statistics model and supervised deep learning model. To be specific, the complex reflectance change detection estimator is introduced to generate a difference image and reduce the false alarm in the low clutter-to-noise region. Since the low correlation in a difference image caused by the natural factors severely affects the detection performance, the multiple statistics based on intensity summation and intensity difference are, respectively, proposed to extract water region and vegetation region and suppress the corresponding false alarm. Then the construction of the coarse-to-fine image makes use of land cover information and trace features while the compressed Unet improves the utilization efficiency of trace samples. Meanwhile, the inductive transfer learning based on unsupervised pretraining and few labeled trace samples helps to train a well detection model. Experiments on measured SAR data demonstrate the effectiveness of proposed methods. [ABSTRACT FROM AUTHOR]

Ship motions during long coherent processing interval (CPI) have six degrees of freedom, and the oscillatory motions are roughly periodical. The traditional ship imaging methods usually use a short time interval to form an image, while the image quality may suffer from low resolution, poor signal-to-noise ratio (SNR), and scatter scintillation. Using a longer CPI to generate an image may improve the quality but, however, largely increase the focusing difficulty. In this article, we investigate the focusing challenges of oscillatory ships with long CPI. Through analyzing the relative motion between the radar and the ship, the properties of wavenumber domain support (WDS) and point spreading function (PSF) of oscillatory ship imaging are studied. It is illustrated that the WDS is a 3-D sparse curved surface generated by the complex relative motion, with a time-variant energy density, nonparallel spectrum boundaries, and a complex structure. The PSF of an oscillatory ship may have a 3-D resolution but also multiple high-level sidelobes. The relationship between the WDS and the nonideal PSF is illustrated with the projection slice theorem (PST). Moreover, it is discussed that the scatterers distributed on a 3-D ship cannot be focused uniformly on a 2-D imaging plane (IP) due to the variation of the slant-range plane (SRP). The projection relationships of the resolutions and focusing positions between the SRP and the IP are also derived. Simulation results are presented to validate the analyses throughout this article. [ABSTRACT FROM AUTHOR]

This article presents a fast back-projection (BP) algorithm based on subaperture (SA) image coherent combination in a downsampled Cartesian coordinate grid for high squint diving terrain observation by progressive scans (HSD-TOPS) synthetic aperture radar (SAR) ground plane imaging. A two-step spectrum compression (SC) method is proposed to coherently combine the aliasing SA images by exploiting the relationship between the wavenumber and the image frequency. The first-step SC is introduced to align the spectrum support region centers. The second-step SC effectively corrects the space-variant spectrum inclination. The proposed algorithm does not need interpolation in the process of image combination, which ensures the accuracy and the efficiency of the algorithm. Furthermore, the SC method is well-modified to suppress the sidelobes of the focused image. Simulation and measured data processing verify the effectiveness of the proposed method. [ABSTRACT FROM AUTHOR]

Since path curvature becomes severer for higher orbit synthetic aperture radar (SAR), the stripmap mode may not provide a reliable azimuth resolution under different look angles or at different positions. Beam steering is especially valuable herein for adjusting the azimuth resolution under different observation conditions by designing the antenna steering rate. Moreover, considering that the large range migration and center range variation in the squint mode may increase the echo length and reduce the achievable scene width, we proposed a novel 2-D beam steering (TDBS) method, which promises not only a required azimuth resolution but also a wide swath (or shortened echo length) at squint when cooperated with the variable interpulse time (VIPT) technique. The simulation results obtained under different look directions are shown to validate the effectiveness of the proposed beam controlling method. [ABSTRACT FROM AUTHOR]

The microwave photonic (MWP) radar technique is capable of providing ultrawide frequency bandwidth waveforms to generate ultrahigh-resolution (UHR) inverse synthetic aperture radar (ISAR) imagery. Nevertheless, conventional ISAR imaging algorithms have limitations in focusing UHR MWP-ISAR imagery, where high-precision high-order range cell migration (RCM) and phase correction are crucially necessary. In this article, a UHR MWP-ISAR imaging algorithm integrating rotation estimation and high-order motion terms compensation is proposed. By establishing the relationship between parametric ISAR rotation model and high-order motion terms, an average range profile sharpness maximization (ARPSM) is developed to obtain rotation velocity by using nonuniform fast Fourier transform (NUFFT). Second-order range-dependent RCM is corrected with parametric compensation model by using the rotation velocity estimation. Furthermore, the spatial-variant high-order phase error is extracted to compensation by the entire image sharpness maximization (EISM). A new imaging framework is established with two one-dimensional (1-D) parameter estimations: ARPSM and EISM. Extensive experiments demonstrate that the proposed algorithm outperforms traditional ISAR imaging strategies in high-order RCM correction and azimuth focusing performance. [ABSTRACT FROM AUTHOR]

The water body detection in high-resolution synthetic aperture radar (SAR) images is a challenging task due to the changing interference caused by multiple imaging conditions and complex land backgrounds. Inspired by the excellent adaptability of deep neural networks (DNNs) and the structured modeling capabilities of probabilistic graphical models, the cascaded fully-convolutional network (CFCN) is proposed to improve the performance of water body detection in high-resolution SAR images. First, for the resolution loss caused by convolutions with large stride in traditional convolutional neural network (CNN), the fully-convolutional upsampling pyramid networks (UPNs) are proposed to suppress this loss and realize pixel-wise water body detection. Then considering blurred water boundary, the fully-convolutional conditional random fields (FC-CRFs) are introduced to UPNs, which reduce computational complexity and lead to the automatic learning of Gaussian kernels in CRFs and the higher boundary accuracy. Furthermore, to eliminate the inefficient training caused by imbalanced categorical distribution in the training data set, a novel variable focal loss (VFL) function is proposed, which replaces the constant weighting factor of focal loss with the frequency-dependent factor. The proposed methods can not only improve the pixel accuracy and boundary accuracy but also perform well in detection robustness and speed. Results of GaoFen-3 SAR images are presented to validate the proposed approaches. [ABSTRACT FROM AUTHOR]

The curved trajectory and long synthetic aperture time of medium-Earth-orbit (MEO) synthetic aperture radar (SAR) lead to a 2-D spatial variation in the signals. Traditional methods treat the range and azimuth variations separately and usually suffer from high computational complexities. In this article, we investigate the Doppler rate distribution across a large scene and exploit an optimal imaging coordinate system, in which the MEO SAR signals satisfy the azimuth-shift-invariant property. Thus, the additional processing of the azimuth spatial variation in MEO SAR imaging algorithms can be avoided, and the efficiency of the image formation processor can be obviously improved. The Doppler linearization is used to address the higher-order Doppler parameters to achieve more precise focusing, and at the same time, addresses the azimuth time shift caused by the changes of signal distribution. Finally, processing results of simulated stripmap-mode data with the 2-m resolution are presented to validate the proposed algorithm. [ABSTRACT FROM AUTHOR]

A squinted observation geometry along with long integration time significantly aggravates the range walk and spatial variation of a medium-earth-orbit (MEO) synthetic aperture radar (SAR) signal. Variable pulse repeating frequency (PRF) is recommended to avoid the blockage in echo recording and save storage space. The existing wavenumber algorithms cannot handle the nonlinear and range–azimuth-coupled spatial variation (RACSP) over a large scene. In this paper, we propose a modified Stolt mapping method along with a modified joint time and Doppler resampling (JTDR) for highly squinted MEO SAR data processing. An azimuth timescale transformation is used to deal with the nonlinear spatial variation of the azimuth frequency-modulation (FM) rate. An extended Omega-K is used to linearize the range frequency and achieve range cell migration correction (RCMC). To address the RACSP, the Doppler is linearized in the range-Doppler domain using a range-dependent Doppler scale transformation. The computational complexity and geometry distortion correction (GDC) are also discussed. Simulation results are shown to verify the effectiveness of the developed focusing approaches. [ABSTRACT FROM AUTHOR]

This paper investigates the imaging problems in squint beam-steering synthetic aperture radar (SBS-SAR) mounted on high-speed platforms with constant acceleration. The cross-range-dependent range cell migration (RCM) is compensated by keystone transform (KT) and time domain RCM correction (RCMC). By derotation and phase compensation, the KT of Doppler folded signal is achieved without zero-padding. For azimuth processing, the signal is reconstructed by the nonlinear phase and range-dependent derotation. Then, the space-variant (SV) Doppler chirp rate is corrected by time domain azimuth nonlinear chirp scaling (ANCS). After frequency domain matched filtering, the full aperture signal is focused in the 2-D time domain. The algorithm is validated by simulated SAR data, including the evaluation of RCMC with KT, geometric correction, and the focusing performance. [ABSTRACT FROM AUTHOR]

The motion compensation (MOCO) for the airborne SAR with ultrahigh resolution and wide swath is required to consider the range-dependent (RD) phase error. The RD phase error may cause an RD residual-range cell migration (RCM) after the correction of RCM, which can degrade the performance of phase gradient autofocus (PGA) when estimating the phase error. In addition, because the PGA estimation is based on the strong scattering point, it may wrongly estimate the phase error for some observation scenes without strong scattering point. Alternatively, to take into account the above two problems, we study a MOCO algorithm based on two-step accuracy improvement. In the algorithm, the first step is to estimate and correct the RD residual-RCM and thus improves the accuracy of PGA. The second step is to develop a prior-information-based-weighted least square (PI-WLS) to further improve the accuracy of RD phase error estimation. Processing of airborne real data validates the effectiveness of the proposed algorithm. [ABSTRACT FROM AUTHOR]

Accurate range modeling, cross-range-dependent range migration, and space-variant Doppler parameter are main issues to be solved in processing high-squint synthetic aperture radar (SAR) data acquired from maneuvering platforms. A frequency domain backprojection algorithm, based on local Cartesian coordinate (LCC) and subregion range cell migration correction, is proposed to deal with these problems. With the proposed algorithm, the range model is built in an LCC system to accurately match the signal characteristics after range walk correction. Then, the compensation of cross-range-dependent range migration is implemented based on properly divided subregions after azimuth spectrum filtering. Finally, the space-variant Doppler parameter and higher order phase terms are coherently integrated in range-Doppler domain to get the focused subregion images with full resolution of the synthetic aperture. The final image of the entire scene is obtained by directly connecting all subregion images. The results of simulated and real SAR data validate the proposed algorithm. [ABSTRACT FROM AUTHOR]

The available focusing algorithms for medium-Earth-orbit (MEO) SAR are all based on the complex nonhyperbolic range equation, which may make it more difficult in imaging processing. In this paper, we model the range equation as the standard hyperbolic form based on the motion compensation (MOCO) principle. However, the conventional two-step MOCO may introduce azimuth spectrum expansion due to the potential large motion error, which can lead to severe azimuth ambiguity. To resolve this problem, we develop an omega-K algorithm based on a modified two-step MOCO and an adaptively straight equivalent (ASE)-velocity model. The algorithm is implemented through three-step processing: 1) the modified two-step MOCO does not compensate for the quadratic motion error (the main factor for the spectrum expansion); 2) an ASE-velocity model is introduced to compensate for the quadratic motion error; and 3) an extended Stolt mapping is proposed to perform the accurate range cell migration correction, and the tandem singular value decomposition-nonlinear chirp scaling algorithm is to correct the azimuth-variant phase error and to perform the azimuth compression. Processing of simulated data and airborne SAR real data validates the effectiveness of the proposed algorithm. [ABSTRACT FROM AUTHOR]

Image formation of large scenes is still challenging in medium-earth-orbit (MEO) synthetic aperture radar (SAR) due to the existence of severe 2-D space variance. In this paper, the properties of space variance are analyzed in detail, and then a variable-coefficient fourth-order range model is adopted to model the space-variant range history of every target in a large scene accurately. A method integrating a modified chirp scaling algorithm with joint time-Doppler resampling is proposed to address the range-variant range cell migration, as well as the azimuth-variant frequency-modulation rate and higher order Doppler parameters. The computational burden and alternative implementation approaches are also discussed. Finally, processing of simulated data for MEO SAR with 2-m resolution is presented to validate the proposed algorithm. [ABSTRACT FROM AUTHOR]

Due to the very high orbit, the apparent features of geosynchronous synthetic aperture radar (GEOSAR) are the curved trajectory and long integration time, which can lead to severe coupling between the azimuth and the range directions and, therefore, complicates the resolution evaluation. The traditional analytical approach based on the 2-D division may produce large resolution error, and the numerical approach may suffer from huge computation burden. Therefore, an analytical resolution evaluation approach for GEOSAR based on the local feature of the ambiguity function is studied in this paper. The proposed approach is validated with simulation data to be of high efficiency and accuracy. In addition, the proposed approach is also demonstrated to be capable of evaluating the resolution for other complex platforms, and of evaluating the 3-D resolution of a SAR system. [ABSTRACT FROM AUTHOR]

For the ultrahigh-resolution airborne stepped-frequency synthetic aperture radar, very large synthetic bandwidth and very long integration time may lead to a 2-D space-variant (SV) motion error when the aircraft flies off the ideally straight trajectory due to the atmospheric turbulence. This new type of error complicates the motion estimation and motion compensation (MOCO). For the motion estimation, we present a jointly 2-D SV motion error estimation method to simultaneously consider the range-variant motion error and the azimuth-variant motion error. For the MOCO, we propose a 2-D SV-MOCO method. The method is implemented through three processing steps: 1) two-step MOCO for the space-invariant motion error and the range-variant phase error; 2) range block-based chirp-z transform (CZT) for the range-variant envelope error; and 3) range block division for the range-dependent azimuth-variant phase error based on the azimuth subaperture method. Finally, processing of simulated data and real data validates the proposed methods. [ABSTRACT FROM PUBLISHER]

In very high resolution spaceborne-squinted sliding spotlight synthetic aperture radar, the traditional imaging algorithms based on the equivalent squint range model (ESRM) cannot be applied, because the ESRM model is inaccurate in this case. For this problem, this paper proposes a squint equivalent acceleration range model to precisely take into account the spaceborne-squinted curved orbit. Then a full-aperture squint-imaging algorithm is proposed based on this new range model, which can handle the azimuth variation of the equivalent velocity and the range variation of the 2-D frequency spectrum. The results of the simulation validate the effectiveness of new range model and imaging algorithm. [ABSTRACT FROM PUBLISHER]

In this paper, for a multichannel synthetic aperture radar–ground moving target indication (SAR--GMTI) system, a new high-accuracy focusing and relocating method using instantaneous interferometry, i.e., carrying out interferometry operation in the azimuth time domain before focusing, is proposed. One of the key steps of this method is to perform instantaneous interferometry to get accurate equivalent cross-track velocity (ECV) estimation for cross-track motion compensation. After that, the signal from a moving target is concentrated in range, and along-track motion compensation becomes convenient. Motion compensation transforms a moving target into a stationary one; thus, the conventional SAR imaging algorithm can be applied to focus the moving target. Finally, a strategy for accurately relocating a moving target is presented. The processing results of simulated and measured data illustrate the effectiveness of the proposed method. [ABSTRACT FROM AUTHOR]

In synthetic aperture radar (SAR) images, moving targets are usually smeared and/or imaged at incorrect positions due to the target motions during the SAR integration time. Moreover, since a high-resolution wide-swath SAR system is operated with a rather low pulse repetition frequency, a moving target will cause multiple ghost targets in the reconstructed SAR image. A new space–time adaptive processing framework is proposed in this paper for removing moving target artifacts in SAR images. In this new framework, the dynamic steering vector concept is proposed. In addition, this paper develops a moving target processing scheme for clutter suppression and moving target imaging and location for a high-resolution wide-swath SAR system. Finally, we locate the well-focused moving targets at the stationary scene image without any disturbing artifacts. The simulated and real data are used to validate the effectiveness of our proposed method. [ABSTRACT FROM AUTHOR]

The imagery of highly squinted synthetic aperture radar mounted on maneuvering platforms with nonlinear trajectory is a challenging task due to the existence of acceleration and the cross-range-dependent range migration and Doppler parameters. In order to accommodate these issues, a frequency-domain imaging algorithm based on tandem two-step nonlinear chirp scaling (TNCS) with small aperture is proposed. For the cross-range-dependent range cell migration (RCM) caused by the linear range walk correction and acceleration, the first-step NCS is introduced to suppress this dependence and realize the unified RCM correction. Based on the differences between full-aperture and small-aperture data in the cross-range processing, the second-step NCS is introduced in frequency domain to equalize the cross-range-dependent Doppler parameters, for cross-range processing is more sensitive to the cross-range dependence than range processing. Furthermore, a novel geometric correction method based on inverse projection is utilized to eliminate the negative effects caused by the imaging processing. Simulation results and real data processing are presented to validate the proposed approach. [ABSTRACT FROM AUTHOR]

In spaceborne synthetic aperture radar, the sliding spotlight mode can acquire high resolution and large azimuth scene size simultaneously. However, when the resolution is very high and the azimuth scene size is large, the traditional hyperbolic range model (HRM) is inaccurate and the variation of the equivalent velocity in azimuth dimension cannot be ignored. Thus, the traditional imaging algorithms based on HRM are no longer available. For this problem, this paper proposes an equivalent acceleration range model, which can precisely take into account the spaceborne curved orbit. Then, velocity scaling algorithm based on this new range model is proposed to meet the needs of very high resolution and large azimuth scene size. The results of the simulation validate the effectiveness of the new range model and the imaging algorithm. [ABSTRACT FROM PUBLISHER]

A space-variant chirp scaling algorithm based on the range cell migration (RCM) equalization and azimuth subband synthesis has been studied to process simulated geosynchronous synthetic aperture radar (GEO-SAR) data. The acceptable order of terms in polynomials for the slant range models in the RCM correction and phase error compensation, division of subband, and suppression of grating lobes of the subbands was investigated. Qualitatively and quantitatively, the method was able to focus simulated GEO-SAR signals well. Finally, the constraint on the spatial extent of azimuth and range dimensions using the algorithm was assessed. [ABSTRACT FROM PUBLISHER]

The linear range walk yields a significant range-azimuth coupling effect in a highly squinted synthetic aperture radar (SAR). Although the linear range walk correction (LRWC) technique can effectively mitigate such coupling effect, it causes azimuth variation in the resulting signal and, as such, the so-called “azimuth-shift invariance” property becomes invalid. In order to eliminate the azimuth variation, a new spectrum processing approach based on azimuth resampling is proposed in this paper. After performing the LRWC, the azimuth resampling is carried out in the 2-D frequency domain and transforms the signal spectrum to be equivalent to that of a broadside SAR. For squinted beamsteering SAR (BS-SAR), e.g., spotlight SAR, sliding spotlight SAR, and Terrain Observation by Progressive Scans SAR, the azimuth resampling is combined with the azimuth signal reconstruction algorithm. As a result, both the azimuth variation, which is induced by the LRWC, and the aliasing, which is caused by antenna beam steering, can be avoided. Therefore, after the azimuth resampling, the squinted SAR data can be focused by exploiting a conventional broadside SAR imaging algorithm. An analysis of the motion error for airborne SAR data processing is also provided. Simulation and real data results show the effectiveness of the proposed algorithm. [ABSTRACT FROM PUBLISHER]

Terrain Observation by Progressive Scans (TOPS) synthetic aperture radar (SAR) and spotlight SAR are advanced SAR imaging modes for wide range swath and high resolution. In order to obtain a wider range coverage, azimuth multichannel is introduced in the literature. Since the azimuth bandwidth of beam steering SAR (BS-SAR; spotlight SAR, sliding spotlight SAR, or TOPS SAR) is much greater than that of a stripmap SAR, a signal reconstruction algorithm used for multichannel stripmap SAR may not be effective for multichannel BS-SAR. In this paper, a multichannel full-aperture azimuth processing algorithm is proposed for a BS-SAR. The key of this algorithm lies in the beam and the azimuth bandwidth compressions of multichannel signals in the Doppler–array and slow time–angle planes, respectively. Through compression processing, the beamwidth and the azimuth bandwidth are smaller than the available angle and equivalent pulse repeating frequency , respectively. Then, an improved post-Doppler STAP method is proposed to recover a 2-D spectrum. With the recovered signal, further processing can be utilized to focus the multichannel signal. Simulation and real data results show the effectiveness of the proposed algorithm. [ABSTRACT FROM AUTHOR]

For different applications with different requirements, many synthetic aperture radar (SAR) modes have been developed in the literature, such as, Terrain Observation by Progressive Scans (TOPS) SAR and sliding spotlight SAR. In this paper, we call TOPS SAR, sliding spotlight SAR, and spotlight SAR as beam steering SAR (BS-SAR for short). Comparing with stripmap SAR, BS-SAR can obtain a wide diversity of resolutions by increasing or reducing the azimuth synthetic time. Traditional polar formation algorithm (PFA) is an efficient algorithm which is mainly developed for spotlight SAR. The PFA has been validated to obtain well-focused results of raw data. In this paper, we extend the traditional PFA to process sliding spotlight SAR and TOPS SAR data, and we call it generalized PFA (GPFA). Comparing with the traditional PFA, GPFA contains a different azimuth deramping function and an additional azimuth scaling operation. The simulated and real data are used to validate the effectiveness of this method. [ABSTRACT FROM AUTHOR]

Many imaging algorithms for different modes, such as, stripmap synthetic aperture radar (SAR), spotlight SAR, sliding spotlight SAR, and terrain observation by progressive scans (TOPS) SAR, of SAR have been studied. This paper is to obtain a unified focusing algorithm (UFA) for these SAR modes based on fractional Fourier transform. By defining the rotation-center range, the stripmap SAR and spotlight SAR can be treated as special cases of sliding spotlight SAR or TOPS SAR. Then, a parameterized focusing algorithm determined by the rotation-center range is presented. Data of each mode can be focused by utilizing UFA and selecting parameters or rotation angles. Some application aspects of UFA are also analyzed. Simulation and real data results are presented to validate the analysis and the proposed method. [ABSTRACT FROM PUBLISHER]