Search

Miniaturized hyperspectral imaging sensors are becoming available to small unmanned airborne vehicle (UAV) platforms. Imaging concepts based on frame format offer an attractive alternative to conventional hyperspectral pushbroom scanners because they enable enhanced processing and interpretation potential by allowing for acquisition of the 3-D geometry of the object and multiple object views together with the hyperspectral reflectance signatures. The objective of this investigation was to study the performance of novel visible and near-infrared (VNIR) and short-wave infrared (SWIR) hyperspectral frame cameras based on a tunable Fabry–Pérot interferometer (FPI) in measuring a 3-D digital surface model and the surface moisture of a peat production area. UAV image blocks were captured with ground sample distances (GSDs) of 15, 9.5, and 2.5 cm with the SWIR, VNIR, and consumer RGB cameras, respectively. Georeferencing showed consistent behavior, with accuracy levels better than GSD for the FPI cameras. The best accuracy in moisture estimation was obtained when using the reflectance difference of the SWIR band at 1246 nm and of the VNIR band at 859 nm, which gave a root mean square error (rmse) of 5.21 pp (pp is the mass fraction in percentage points) and a normalized rmse of 7.61%. The results are encouraging, indicating that UAV-based remote sensing could significantly improve the efficiency and environmental safety aspects of peat production. [ABSTRACT FROM AUTHOR]

Light detection and Ranging (LiDAR) is becoming an increasingly used tool to support decision-making processes within forest operations. Area-based methods that derive information on the condition of a forest based on the distribution of points within the canopy have been proven to produce reliable and consistent results. Individual tree-based methods, however, are not yet used operationally in the industry. This is due to problems in detecting and delineating individual trees under varying forest conditions resulting in an underestimation of the stem count and biases toward larger trees. The aim of this paper is to use high-resolution LiDAR data captured from a small multirotor unmanned aerial vehicle platform to determine the influence of the detection algorithm and point density on the accuracy of tree detection and delineation. The study was conducted in a four-year-old Eucalyptus globulus stand representing an important stage of growth for forest management decision-making process. Five different tree detection routines were implemented, which delineate trees directly from the point cloud, voxel space, and the canopy height model (CHM). The results suggest that both algorithm and point density are important considerations in the accuracy of the detection and delineation of individual trees. The best performing method that utilized both the CHM and the original point cloud was able to correctly detect 98% of the trees in the study area. Increases in point density (from 5 to 50 points/m2) lead to significant improvements (of up to 8%) in the rate of omission for algorithms that made use of the high density of the data. [ABSTRACT FROM PUBLISHER]

We assessed the reproducibility of forest inventory metrics derived from an unmanned aerial vehicle (UAV) laser scanning (UAVLS) system. A total of 82 merged point clouds were captured over six 500-m2 plots within a Eucalyptus globulus plantation forest in Tasmania, Australia. Terrain and understory height, together with plot- and tree-level metrics, were extracted from the UAVLS point clouds using automated methods and compared across the multiple point clouds. The results show that measurements of terrain and understory height and plot-level metrics can be reproduced with adequate repeatability for change detection purposes. At the tree level, the high-density data collected by the UAV provided estimates of tree location (mean deviation (MD) of less than 0.48 m) and tree height (MD of 0.35 m) with high precision. This precision is comparable to that of ground-based field measurement techniques. The estimates of crown area and crown volume were found to be dependent on the segmentation routine and, as such, were measured with lower repeatability. The precision of the metrics found within this paper demonstrates the applicability of UAVs as a platform for performing sample-based forest inventories. [ABSTRACT FROM PUBLISHER]