Search

The Moderate Resolution Imaging Spectroradiometer (MODIS) instrument on the Terra spacecraft is completing two decades of successful Earth observations, providing the scientific community with numerous products and supporting applications, such as land surface cover, sea surface temperature, aerosol properties, and vegetation. The 20 reflective solar bands (RSBs) cover a wavelength range from 0.41 to 2.1 $\mu \text{m}$ and are calibrated primarily using a solar diffuser (SD), with lunar measurements and Earth-view (EV) response trends from desert sites used for the response versus scan-angle (RVS) characterization. Prelaunch analysis showed that a few short-wavelength RSBs of Terra MODIS are particularly sensitive to the polarization of the incident light, with on-orbit results further indicating that the polarization sensitivity has experienced changes that are wavelength, mirror side (MS), and scan-angle dependent. Although the primary calibrator, the SD, should provide an unpolarized light, supplemental inputs from the EV response trends used in the RVS characterization are impacted by the Earth scene polarization. The EV trends, uncorrected for polarization, pose a significant challenge in the RVS characterization for the short wavelength bands (3, 8, 9, and 10), therefore impacting the long-term trends and uncertainty characterization. Previous studies from the MODIS Characterization Support Team (MCST) and the National Aeronautics and Space Administration (NASA) Ocean Biology Processing Group (OBPG) have independently estimated the polarization correction to be applied on the calibrated products to mitigate the impacts to some extent. In this article, the RVS is characterized using the EV response trends after correcting for the polarization effects. Results indicate a significant improvement in the long-term trending, reduced uncertainties in the forward prediction, and a more accurate per-pixel uncertainty provided by the uncertainty index (UI) in the MODIS L1B. This enhanced approach will, therefore, be considered for implementation in the future L1B reprocessing efforts. The enhanced approach also vastly simplifies the process of adding long-term trend corrections on top of the MODIS L1B, which should streamline the science data production in the future.

The design of the Moderate-Resolution Imaging Spectroradiometer (MODIS) instrument was driven by the scientific community’s desire to have near-daily global coverage at moderate resolution (~1km) with comprehensive spectral coverage from visible to long-wave infrared wavelengths. Since their launches in 1999 and 2002, respectively, the Terra and Aqua MODIS instruments have made continuous global observations and generated numerous data products to help users worldwide with their studies of the Earth’s system and its short- and long-term changes. The 20 reflective solar bands (RSBs) with wavelengths from 0.41 to $2.2~\mu \text{m}$ collect data at three nadir spatial resolutions: 250 m, 500 m, and 1 km. The solar diffuser (SD) coupled with the SD stability monitor (SDSM) provides a reflectance-based calibration on-orbit. In addition, lunar observations and response trends from pseudoinvariant desert sites are used to characterize the response versus scan-angle changes on-orbit. This paper provides a brief overview of MODIS RSB calibration algorithms, as implemented in the latest Level 1B version 6.1, operational activities, on-orbit performance, remaining challenges, and potential improvements. Results from the SD and SDSM measurements show a wavelength and mirror-side-dependent degradation in RSB responses, with the largest degradation at the shortest wavelengths, particularly for Terra MODIS. Aqua MODIS has experienced far less degradation of its optics and on-board calibrators compared with Terra MODIS, resulting in an overall better performance. With the exception of Aqua band 6, there have been no new noisy or inoperable detectors in the RSB of either instrument during postlaunch operations. As the instruments age and continue to endure the space environment, the detectors and the optical systems degrade. The challenges associated with incorporating these on-orbit changes to ensure a production of high-quality calibrated L1B data products are also discussed in this paper.

The high-contrast edge of the Moon has been used for the on-orbit measurement of the modulation transfer function (MTF) of remote sensing instruments with a lunar observation capability. With the lunar edge as a target, the classical edge method is applied to the National Aeronautics and Space Administration's MODerate resolution Imaging Spectroradiometer (MODIS) on board the Terra and Aqua satellites. One of the major difficulties encountered during the calculation is that the spatial resolution of MODIS is too coarse to capture the fine structure of the edge spread function (ESF), which is required to calculate the MTF. To produce the MODIS ESF in high resolution, lunar images of a selected edge acquired by multiple instrument scans need to be superposed by aligning the edge positions accurately. In this paper, an algorithm is developed to perform the alignment, based on the lunar position data generated by the MODIS geolocation algorithm and recorded scan by scan. The positions of the lunar edges at the focal plane are calculated scan by scan, allowing the construction of a high-quality ESF for MTF derivation. The algorithm is applied to all MODIS bands with 250-m, 500-m, and 1-km spatial resolutions in both along-scan and along-track directions. The along-track MTF results are particularly valuable because the onboard SpectroRadiometric Calibration Assembly can only monitor the along-scan MTF. The trending results show that the along-track MTF of MODIS has been stable throughout the MODIS lifetime and is well above the design specification for all bands. The limitation of the algorithm is analyzed. The algorithm developed in this paper can be applied to other instruments with similar design features.