Search

This paper presents a new damage-mapping algorithm based on coherence images estimated from multitemporal polarimetric–interferometric synthetic aperture radar (SAR) data. The interferometric coherence has been restricted in the conventional damage-mapping approaches because the decorrelation sources are too complicated to interpret accurately and temporal decorrelation effects caused by slowly occurring natural changes and disaster events are often coupled together. To overcome these limitations, we formulate a coherence model that accounts for temporal decorrelation in two simplified layers, ground and volume layers, for long-temporal repeat-pass scenarios with zero spatial baseline. The model parameters include: 1) ground-to-volume ratio, a factor to determine the relative scattering contribution of ground and volume layers; 2) temporally correlated change, which captures the exponentially decaying behavior of coherence with time; and 3) temporally uncorrelated change, which is associated with random temporal changes. We estimate the model parameters in three steps: coherence optimization, interferometric pair-invariant parameter estimation, and interferometric pair-variant parameter estimation. To isolate the effects of disaster events from background natural changes, we calculate the probability density functions of historical change pixel by pixel and produce a probability map of damage. We tested the algorithm with uninhabited aerial vehicle data acquired from 2009 to 2015 for mapping the area damaged by the 2015 Lake Fire in California. Based on performance evaluation using receiver operating characteristic curves for optimized coherences and averaged probability maps, the proposed method reduced the false alarm from 0.25 to 0.07 when the probability of detection was 0.85 compared to coherence products alone.

Detection of changes caused by major events-such as earthquakes, volcanic eruptions, and floods-from interferometric synthetic aperture radar (SAR) data is challenging because of the coupled effects with temporal decorrelation caused by natural phenomena, including rain, snow, wind, and seasonal changes. The coupled effect of major events and natural phenomena sometimes leads to misinterpretation of interferometric coherence maps and often degrades the performance of change detection algorithms. To differentiate decorrelation sources caused by natural changes from those caused by an event of interest, we formulated a temporal decorrelation model that accounts for the random motion of canopy elements, temporally correlated dielectric changes, and temporally uncorrelated dielectric changes of canopy and ground. The model parameters are extracted from the interferometric pairs associated with natural changes in canopy and ground using the proposed temporal decorrelation model. In addition, the cumulative distribution functions of the temporally uncorrelated model parameters, which are associated with natural changes in canopy and ground, are estimated from interferometric pairs acquired before the event. Model parameters are also extracted from interferometric SAR data acquired across the event and compared with the cumulative probabilities of natural changes in order to calculate the probability of a major event. Subsequently, pixels with cumulative probabilities greater than 75% are marked as changed due to the event. A case study for detecting volcanic ash during the eruption of the Shinmoedake volcano in January 2011 was carried out using L-band Advanced Land Observation Satellite PALSAR data.

Doppler velocity can be derived by calculating Doppler shift anomalies between predicted and estimated Doppler centroids. The predicted Doppler centroid is calculated based on a geometric model of satellite assuming that the target is not moving. The estimated Doppler centroid can be directly extracted from the raw SAR signal data by applying the average cross-correlation coefficient method. It is known that wind-generated ocean waves can significantly contribute to Doppler velocity due to the correlation between orbital motions of the waves and (tilt and hydrodynamic) modulated radar cross sections, in addition to what sea surface current contributes. In this study, the characteristics of Doppler velocities under hurricane conditions were investigated using RADARSAT-1 ScanSAR raw data. Five different hurricanes (Hurricane Dean, Hurricane Ivan, Hurricane Kyle, Hurricane Lili, and Typhoon Xangsane) and sequential acquisitions of two hurricanes (Hurricane Kyle and Hurricane Lili) were selected to study the contribution of wind-induced waves to Doppler velocities and compared with in situ measurements of drifting buoys. The results show that hurricane-generated seas and associated winds and waves appear to be different from ordinary sea state. This leads to lower estimates of Doppler velocities than expected and much closer to sea surface current velocities.

One of the main limitations in measuring ground deformation using synthetic aperture radar interferometry (InSAR) is atmospheric phase delay effects. In volcanic regions, the atmospheric phase delay effects can cause serious problems in detecting volcanic unrest because atmospheric thickness is inversely related with the elevation of a volcanic mountain. It is commonly known that the atmospheric phase screen (APS) can be decomposed spatially into stratified and turbulent components. In this paper, the stratified and turbulent atmospheric conditions of a volcanic area were simulated using weather research and forecasting (WRF) model, and the simulated atmospheric conditions were compared with in situ radiosonde data. The comparison results proved that the stratified APS from the WRF model could reflect the reasonable patterns of seasonal changes and vertical profiles with dependable quality. We also found that the stratified APS was significantly correlated with time and sometimes severely contaminated the quality of volcanic deformation estimation. These results indicate that the temporal high-pass (HP) filtering, which has been usually applied in time series InSAR analysis for extracting and removing APS, cannot work properly in volcanic area. Thus, we propose a new method that employs the stratified APS obtained from the WRF model by correlating with topography and the (residual) turbulent APS that can be effectively eliminated by temporal HP filtering in persistent scatterer interferometry (PSI). We applied the proposed method (atmosphere-corrected PSI) to Advanced Land Observing Satellite Phased Array type L-band SAR data that cover Shinmoedake volcano, Japan, and found that the estimated surface deformation and APS agreed well with those measured from GPS and Moderate-Resolution Imaging Spectroradiometer data, respectively.

In this paper, we have investigated the relationship between the depolarization effects and the wintertime sea ice thickness in the landfast ice region where smooth thick first-year ice (FYI) and deformed old ice coexisted by using C- and X-band spaceborne polarimetric synthetic aperture radar (SAR) data (RADARSAT-2 and TerraSAR-X). We have found a strong correlation between the in situ sea ice thickness and the SAR-derived depolarization factors (copolarized correlation and cross-polarized ratio). The observed relationships have demonstrated not only a categorical difference between FYI and multiyear ice (MYI) but also a one-to-one continuity in the scatter plots, rather than being clustered. It clearly shows that the observed correlations are not merely from the categorical difference in scattering mechanism between FYI and MYI and that there might exist a one-to-one relationship between thickness and depolarization factors at least in our deformed ice case. This suggests that depolarization factors could be effective SAR parameters in the estimation of wintertime sea ice thickness. Numerical model simulations explained some portions of the correlation by employing multiple scattering on the sea ice surface and volume scattering within the low-density subsurface layer.

Synthetic aperture radar (SAR) signals can propagate through hazardous weather and atmospheric conditions with heavy cloud cover, volcanic dust, snow, or rain. The all-weather capabilities of SARs have attracted significant interest in remote sensing communities, since serious environmental disasters such as oil spills have been highly ?elusive? to optical sensors, making visible spectrum data vulnerable to rapidly changing atmospheric conditions. In this paper, we discuss the technical functionalities of TerraSAR-X from the emergency response perspective, describing its technical abilities in terms of a damping ratio, radiometric accuracy, and noise level with reference to the actual Hebei Spirit oil-spill incident that occurred on the west coast of the Korean peninsula in December 2007. The damping ratios estimated from the TerraSAR-X data as a function of Bragg wavenumber for various wind speeds indicate that TerraSAR-X data can be effectively used to identify oil-spill areas with acceptable accuracy. We also received ERS-2, ENVISAT, RADARSAT-1, and ALOS PALSAR data for this oil-spill event, not simultaneously but with varying time delays. The processing results for the multitemporal data sets obtained from the X- and C-band SAR systems are useful since they can be used to determine the near-real-time migration of spilt oil. The results of the current study indicate that there are distinct advantages of using X-band TerraSAR-X data for oil-spill detection compared to the data obtained at other available frequencies.

The coastal zones of the Korean peninsula are well known for their large tide ranges and vast expanse of intertidal flats. In this paper, methods of extracting the roughness of the scattering surface of intertidal mudflats from polarimetric synthetic aperture radar (SAR) data have been investigated. The L-band NASA/Jet Propulsion Laboratories airborne SAR data, which were acquired in the intertidal zone during PACRIM-II Korea campaign, were used to estimate the roughness of intertidal mudflats. Surface roughness can be utilized as a useful parameter to monitor the fishery activities in intertidal flats as well as the changes in textural characteristics of surface sediments. In order to retrieve roughness parameters, such as the rms height and the correlation length, of intertidal mudflats, three types of roughness inversion algorithms, based on the Integral Equation Method (IEM), semiempirical, and extended-Bragg models, have been investigated and developed. The inversion algorithms based on the IEM and semiempirical models can be applied to the dual-polarized SAR, while the extended-Bragg model-based inversion approach is also applicable to the fully polarimetric SAR observations. Results indicate the fully polarimetric approach is more pertinent to monitor geophysical parameters from space than the dual polarimetric approach, even if it is possible to reduce the number of unknown surface variables in the specific case of inversion problems.

A new method for estimating the atmospheric transmittance and wind speed over the ocean from WindSat data is derived using a simplified model for the ocean surface reflectivity. The simplified reflectivity model is used to calculate both the surface emissivity and the reflection of downwelling atmospheric radiation. The wind-speed dependence of the surface reflectivity is parameterized using simple rational functions with coefficients determined from the WindSat data. Because the vertically polarized brightness temperature depends primarily on the atmospheric state, it is used to obtain an initial estimate of the atmospheric transmittance at each spatial location. These estimates are then combined with the horizontally polarized brightness temperature to estimate the wind speed at each location. The first wind-speed estimate is used to refine the estimate of the transmittance, and the process is repeated until the estimates converge, resulting in a simultaneous solution for the atmospheric transmittance and the wind speed. The results are illustrated for two WindSat data sets collected on September 12 and 14, 2003. We have also investigated two methods of estimating wind direction using WindSat measurements of the third and fourth Stokes parameters. The first method involves an algebraic solution for the wind direction from simultaneous measurements of the third and fourth Stokes parameters. The second method involves measurements of the third Stokes parameter from two look directions (fore and aft scan angles), made possible by the conical scanning geometry of WindSat. A comparison and evaluation of these methods is made using the same data sets.

Along-track interferometric synthetic aperture radar (ATI-SAR) is an active coherent imaging system, utilizing two antennas separated along the platform flight direction. The phase information of ATI-SAR from the Doppler shift of the backscattered signal represents the line-of-sight velocity of the water scatterers. While the advent of ATI-SAR provided us with a potentially powerful technique for ocean surface current and wave mapping, the surface current has not been measured exactly from the ATI-SAR velocity because the Doppler shift is not simply proportional to the component of the mean surface current. It also includes other types of contributions associated with the phase velocity of the Bragg waves and orbital motions of all ocean waves that are longer than Bragg waves. In this paper, we review how the phase difference measured by ATI-SAR is related to the mean Doppler frequency, and we develop a new and practically useful method to extract the surface current component utilizing simultaneously measured L- and C-band ATI-SAR data. Since the measured ATI-SAR velocity shows a different value at a different radar-frequency, we investigate the influence of Bragg-resonant waves and long ocean wave motions on the ATI-SAR velocity according to the radar frequency. The Bragg-wave phase velocity component, which is a significant source of error for extracting the surface current, can be effectively eliminated by using L- and C-band ATI-SAR. The method is applied to L- and C-band ATI-SAR measurements acquired at the Ulsan coast in the southeastern part of the Korean peninsula. The resulting ocean surface current vectors are compared with in situ measurements collected by recording current meter. We furthermore extract ocean surface wave information from the ATI-SAR phase image using a quasi-linear transform.