1,835 results
Search Results
2. Design of Controllers for Electrical Power Systems Using a Complex Root Locus Method.
- Author
-
Doria-Cerezo, Arnau and Bodson, Marc
- Subjects
ELECTRIC controllers ,ELECTRIC inverters ,INDUCTION machinery ,INDUSTRIAL electronics ,PREDICTIVE control systems - Abstract
A large class of three-phase electrical power systems possess symmetry conditions that make it possible to describe their behavior using single-input single-output transfer functions with complex coefficients. In such cases, an extended root locus method can be used to design control laws, even though the actual systems are multi-input multi-output. In this paper, the symmetric conditions for a large class of power systems are analyzed. Then, the root locus method is revisited for systems with complex coeffcients and used for the analysis and control design of power systems. To demonstrate the benefits of the approach, this paper includes two examples: 1) a doubly fed induction machine and 2) a three-phase LCL inverter. [ABSTRACT FROM PUBLISHER]
- Published
- 2016
- Full Text
- View/download PDF
3. Multiphase machines and drives - Revisited.
- Author
-
Levi, Emil, Barrero, Federico, and Duran, Mario J.
- Subjects
WINDING machines ,ELECTRIC inverters ,INTEGRATED circuit fault tolerance ,ELECTRIC windings ,INDUCTION motors ,HARMONIC analyzers - Abstract
Although the concept of a multiphase drive system dates back to the middle of the 20th century, the initial pace of development was rather slow, as witnessed by the first two surveys of the area published in the beginning of this century. However, considerably new developments have resulted in the last decade of the 20th century and the beginning of this century, leading to an authoritative survey of the asymmetrical six-phase drive control and subsequently of the review of the complete area. This also initiated the organization and subsequent publication of the first IEEE Transactions on Industrial Electronics "Special Section on Multiphase Machines and Drives" in May 2008, which commenced with another survey paper, and that contained 12 original research papers. Since the publication of this Special Section in May 2008, the level of interest and pace of developments in the area have further accelerated and substantial new knowledge has been generatedwith an ever-increasing number of published research papers and reported new industrial applications. Such a trend has been emphasized in a recent paper. It therefore seemed appropriate to revisit the area and organize this Special Section as a sequel to the first one. The call for the Special Section papers resulted in 51 submissions, almost twice as many as the total back in 2008, thus confirming a substantial growth of the area. Indeed, the amount of new knowledge acquired since the publication of the first Special Section in 2008 has meant that it was not possible to provide a complete and thorough survey of the field in a single review paper. [ABSTRACT FROM AUTHOR]
- Published
- 2016
- Full Text
- View/download PDF
4. Photovoltaic Module and Submodule Level Power Electronics and Control.
- Author
-
Spagnuolo, Giovanni, Kouro, Samir, and Vinnikov, Dmitri
- Subjects
PHOTOVOLTAIC power systems ,ELECTRIC current converters ,ELECTRIC inverters - Abstract
The nine papers in this special section focus on photovoltaic module and sub-module level power electronics. Grid connected photovoltaic energy systems have experienced an explosive growth over the last decade, with a cumulative installed capacity surpassing the 400 GW milestone as of 2017. Among PV system configurations, distributed module-level converter architectures can lead to a higher energy yield by mitigating partial shading, persistent shading (soiling, snow, bird droppings, and fallen leaves), mismatch, and aging, through a higher maximum power point tracking (MPPT) efficiency. Also, distributed electronics might be the key for implementing diagnostic and prognostic actions at a module level. Among these configurations, microinverters (also known as ac-module inverter), which connect a single PV module to the grid, and PV power optimizers, which are dc–dc converters performing the MPPT function at a module level, have attracted the academic and industrial interest in the last decade. So much so, that both microinverters and dc–dc power optimizers are commercialized by tens of companies around the world, with a great variety of circuit topologies, which comprise combinations of one or more power stages, interleaved converters, resonant converters, topologies with and without isolation, etc. [ABSTRACT FROM AUTHOR]
- Published
- 2019
- Full Text
- View/download PDF
5. Diode-Free T-Type Three-Level Neutral-Point-Clamped Inverter for Low-Voltage Renewable Energy System.
- Author
-
Wang, Yong, Shi, W. W., Xie, N., and Wang, C. M.
- Subjects
DIODES ,ELECTRIC inverters ,RENEWABLE energy sources ,ELECTRIC potential ,POWER resources - Abstract
In this paper, the conventional I- and T-type three-level neutral-point-clamped (3L-NPC) inverter for low-voltage renewable energy systems is first investigated. Literature research shows that the T-type inverter improves I-type's insulated-gate bipolar transistor (IGBT) $+$ IGBT current paths. However, the IGBT $+$ diode paths are the same. The calculation in this paper further reveals that the IGBT $+$ diode current paths dominate the conduction losses and even the whole semiconductor losses. Based on the aforementioned recognitions, a novel T-type inverter is presented as an alternative to be applied in the low-voltage renewable energy systems. In the proposed 3L-NPC, four CoolMosfets replace the IGBT $+$ diode middle bidirectional switch. In the proposed topology, there is no diode involved in the current path supposing the unity power factor. In this way, the conduction loss is expected to be reduced compared with that from the conventional T-type 3L-NPC, particularly in the low and medium power ranges. [ABSTRACT FROM PUBLISHER]
- Published
- 2014
- Full Text
- View/download PDF
6. Single-Phase Dual-Mode Interleaved Multilevel Inverter for PV Applications.
- Author
-
Pourfaraj, Alireza, Monfared, Mohammad, and Heydari-doostabad, Hamed
- Subjects
ELECTRIC inverters ,REACTIVE power ,PULSE width modulation transformers ,TIMESHARE (Real estate) ,HARMONIC distortion (Physics) ,ELECTRIC potential - Abstract
A novel single-phase transformerless dual-mode interleaved multilevel inverter (DMIMI) is proposed in this paper, which can inject a highly sinusoidal ac current to the grid even with the input dc voltage less than the peak grid voltage. Furthermore, dead-beat controllers are developed to directly calculate the optimal duty cycles in a digital control platform. As compared to the traditional dual-mode multilevel approaches, the DMIMI offers high efficiency, less number of components conducting simultaneously in each operation mode, and the capability of reactive power exchange. This paper presents the theoretical analysis and the experimental results obtained from a 1-kW prototype. The experimental results reveal that the proposed DMIMI can achieve high conversion efficiency and low leakage current as well as high quality grid current. [ABSTRACT FROM AUTHOR]
- Published
- 2020
- Full Text
- View/download PDF
7. Sampling Effect Characterization of Digital SPWM of VSI in Time Domain.
- Author
-
Kumar, Mayank and Gupta, Rajesh
- Subjects
PULSE width modulation transformers ,ELECTRIC inverters ,ELECTRIC potential ,ELECTRICAL harmonics ,FIELD programmable gate arrays - Abstract
This paper characterizes the sampling effect in digital sinusoidal pulse width modulation (SPWM) of voltage source inverter (VSI). The time-domain analysis presented in this paper establishes the relation between the fundamental frequency, carrier frequency, and the sampling frequency at different modulation indices of the SPWM. The analysis investigates the effect of sampling frequency of the digital controller on the output of the VSI. It is shown that the low-frequency harmonic components appear in the frequency spectrum of the VSI output voltage due to sampling. As a result, the output current of digitally controlled VSI is stepped in nature. The double Fourier integral solution of the switched waveform for inner and outer integral limits has been used to derive the expression. The integral solution is obtained using Jacobi-Anger expansions. The generalized results developed in this paper are useful to investigate the sampling effect in high switching frequency DSPWM. The proposed sampling effect has been analyzed for SPWM of single-phase H-bridge inverter. The analytical results are verified using simulation and experimental results. The experimental results have been obtained with the use of field-programmable gate array (FPGA) as a digital controller. [ABSTRACT FROM PUBLISHER]
- Published
- 2016
- Full Text
- View/download PDF
8. Real-Time Diagnosis for Open-Circuited and Unbalance Faults in Electronic Converters Connected to Residential Wind Systems.
- Author
-
Kamel, Tamer, Biletskiy, Yevgen, and Chang, Liuchen
- Subjects
CONVERTERS (Electronics) ,CASCADE converters ,SPECTRUM analysis ,ELECTRIC inverters ,ROBUST control ,MATHEMATICAL models - Abstract
This paper presents real-time diagnosis for open-circuited (O-C) and unbalance faults in power electronic converters (PECs) connected to residential small wind systems grid-tied. The spectrum analysis along with the dc components of the voltage and current measurements available in the converter is utilized for the O-C fault detection, classification and localization of the power switching devices in the PEC, as well as the identification of the unbalance input voltage to the converter. The proposed methodologies in this paper require much fewer inputs compared to the previous researches; therefore, they avoid any additional sensors or hardware which include further costs and expenses on such systems. The experimental evaluations for the proposed algorithms are provided and demonstrate the effectiveness and the robustness of the proposed diagnostic algorithms in this paper. The PEC under study consists of three main subsystems: uncontrolled three-phase rectifier, boost chopper, and single-phase inverter. [ABSTRACT FROM PUBLISHER]
- Published
- 2016
- Full Text
- View/download PDF
9. Sound Quality Investigation and Improvement of an Electric Powertrain for Electric Vehicles.
- Author
-
Fang, Yuan and Zhang, Tong
- Subjects
ELECTRIC vehicles ,ELECTROMAGNETIC noise ,GEARING machinery ,ELECTRIC inverters ,SOUND ,EVALUATION - Abstract
The traditional evaluation method of vehicle noise can no longer meet the requirements of electric vehicle as the sound character of electric powertrain (E-PT) is totally different from that of internal combustion engine vehicles. This paper presents a complete investigation of the sound quality of an E-PT. An acoustic test is conducted to analyze the sound character of E-PT, based on which the acoustic origins of E-PT including electromagnetic noise, gear whine, and inverter switching noise are studied. After that the sound quality of E-PT is investigated by objective and subjective evaluations. Subsequently, a sound quality model of E-PT based on support vector machine is established. The relative error testifies the effectiveness of the prediction model. The influence of the main noise origins on the sound quality of E-PT is determined. Finally, the structure of gearbox housing is redesigned based on topology optimization to improve the sound quality. The main original contributions of this paper are not only the sound quality method developed for E-PT but also improvement feasibility of sound quality. [ABSTRACT FROM PUBLISHER]
- Published
- 2018
- Full Text
- View/download PDF
10. Reconfigurable Control Scheme for a PV Microinverter Working in Both Grid-Connected and Island Modes.
- Author
-
Trujillo Rodriguez, César, Velasco de la Fuente, David, Garcera, Gabriel, Figueres, Emilio, and Guacaneme Moreno, Javier A.
- Subjects
ELECTRIC inverters ,ELECTRICAL load ,ALGORITHMS ,RENEWABLE energy sources ,AUTOMATION of interconnected power systems - Abstract
In this paper, a photovoltaic (PV) microinverter capable of operating in both island mode and grid-connected mode by means of a reconfigurable control scheme is proposed. The main advantage of control reconfiguration is that in grid-connected mode, the microinverter works as a current source in phase with the grid voltage, injecting power to the grid. This is the operation mode of most commercial grid-connected PV microinverters. The idea is to provide those microinverters with the additional functionality of working in island mode without changing their control algorithms for grid-connected mode, which were developed and refined over time. It is proposed that in island mode, the microinverter control is reconfigured to work as a voltage source using droop schemes. These schemes consist in implementing P/Q strategies in the inverters, in order to properly share the power delivered to the loads. The aim of the paper is to show that the proposed control reconfiguration is possible without dangerous transients for the microinverter or the loads. Simulation and experimental results on an 180-W PV microinverter are provided to show the feasibility of the proposed control strategy. [ABSTRACT FROM PUBLISHER]
- Published
- 2013
- Full Text
- View/download PDF
11. On Dynamic Models and Stability Analysis of Three-Phase Phasor PWM-Based CSI for Stand-Alone Applications.
- Author
-
Singh, Akanksha, Kaviani, Ali K., and Mirafzal, Behrooz
- Subjects
ELECTRIC inverters ,ELECTRIC power conversion ,ELECTRIC current converters ,ELECTRIC circuits ,RENEWABLE energy source research - Abstract
The phasor-PWM-based current source inverter (CSI) is a boost inverter. The difference between conventional CSIs and the boost inverter is that the boost ratio (VLLrms/Vdc ) in the boost inverter can easily be above 3.0, whereas this ratio is around 1 in conventional CSIs. In order to realize the potential capabilities of the boost inverter and to assist its penetration into renewable energy systems, the boost inverter dynamic behaviors are studied in this paper. First, the large- and small-signal models as well as the dq-equivalent circuits of the boost inverter are presented. Then, the developed models are verified using circuit simulations and experiments on a laboratory-scale 2-kW 208/240- V_{\rm LLrms} V_{\rm dc}=65\ \hbox{V} $ boost inverter made of reverse-blocking IGBTs. Finally, the developed small-signal model is used to study the stability of the boost inverter through root locus of small signal poles (eigenvalues) as control inputs, and load parameters vary within the boost inverter's operating limits. [ABSTRACT FROM PUBLISHER]
- Published
- 2015
- Full Text
- View/download PDF
12. Bearing Currents and Shaft Voltage Reduction in Dual-Inverter-Fed Open-End Winding Induction Motor With Reduced CMV PWM Methods.
- Author
-
Kalaiselvi, J. and Srinivas, S.
- Subjects
PULSE width modulation ,INDUCTION motors ,ELECTRIC inverters ,ELECTRIC discharge research ,VOLTAGE control - Abstract
Exploiting the rich switching redundancies of the dual inverter, new hybrid pulsewidth-modulation (PWM) switching methods are proposed in this paper using the degree of freedom of operating the individual inverters independently, in addition to exercising the degree of freedom of controlling the switching action of the individual legs independently. Two voltage entities, namely, common-mode voltage (CMV) and differential-mode voltage are identified in the dual inverter, and all hybrid PWMs are envisaged aimed at reducing and also eliminating the CMV in it. The effects of such attempts on motor shaft voltage and also the motor bearing currents are presented in detail. Furthermore, bearing current profiles of an open-end winding induction motor are also presented with both conventional and hybrid PWMs proposed in this paper. Electric discharge machining discharge currents are completely eliminated with the use of all hybrid PWM methods proposed in this paper. In addition, implications of completely eliminating the CMV are also presented in this paper. All hybrid PWMs proposed in this paper are first simulated using MATLAB and are experimentally verified on a dual two-level inverter feeding a 1.1-kW 415-V 3- $\phi$ open-end winding induction motor drive. [ABSTRACT FROM PUBLISHER]
- Published
- 2015
- Full Text
- View/download PDF
13. Medium-Voltage Drive for Induction Machine With Multilevel Dodecagonal Voltage Space Vectors With Symmetric Triangles.
- Author
-
Sudharshan Kaarthik, R., Gopakumar, K., Mathew, Jaison, and Undeland, Tore
- Subjects
ELECTRIC inverters ,ELECTRICAL harmonics ,PULSE width modulation ,ELECTRIC circuits ,INDUCTION motors - Abstract
Multilevel inverters with dodecagonal (12-sided polygon) voltage space vector structure have advantages, such as complete elimination of fifth and seventh harmonics, reduction in electromagnetic interference, reduction in device voltage ratings, reduction of switching frequency, extension of linear modulation range, etc., making it a viable option for high-power medium-voltage drives. This paper proposes two power circuit topologies capable of generating multilevel dodecagonal voltage space vector structure with symmetric triangles (for the first time) with minimum number of dc-link power supplies and floating capacitor H-bridges. The first power topology is composed of two hybrid cascaded five-level inverters connected to either side of an open-end winding induction machine. Each inverter consists of a three-level neutral-point-clamped inverter, which is cascaded with an isolated H-bridge making it a five-level inverter. The second topology is for a normal induction motor. Both of these circuit topologies have inherent capacitor balancing for floating H-bridges for all modulation indexes, including transient operations. The proposed topologies do not require any precharging circuitry for startup. A simple pulsewidth modulation timing calculation method for space vector modulation is also presented in this paper. Due to the symmetric arrangement of congruent triangles within the voltage space vector structure, the timing computation requires only the sampled reference values and does not require any offline computation, lookup tables, or angle computation. Experimental results for steady-state operation and transient operation are also presented to validate the proposed concept. [ABSTRACT FROM PUBLISHER]
- Published
- 2015
- Full Text
- View/download PDF
14. Pulsewidth Modulation Control Algorithm for a Six-Phase PMSM: Reducing the Current in the Inverter Capacitor and Current Sensing With Resistors.
- Author
-
Suzuki, Takashi, Hayashi, Yoshitaka, Kabune, Hideki, and Ito, Norihisa
- Subjects
PULSE width modulation ,PERMANENT magnet motors ,ELECTRIC inverters ,SWITCHING circuits ,CAPACITORS - Abstract
Motors and inverters are increasingly being used in vehicles. As more vehicle components are being adopted, requirement for safety and installation space are increasing. Growing attention is being paid to the use of six-phase permanent magnet synchronous motors (PMSMs) and their parallel control by two inverters, because of their reduced size and enhanced safety. This paper proposes a pulsewidth modulation (PWM) control algorithm for a six-phase PMSM. In low-voltage vehicle components such as electric power steering, the current is usually acquired with resistors placed under the low-side switching devices. In the proposed control algorithm, the neutral voltage of the two inverters is shifted to either a lower or higher voltage within a certain range to allow for the signal conditioning time delay after the switching device turns on or off, and the time taken for the phase current to rise or settle. The paper proposes a novel PWM control algorithm that ensures that the on-time of the low-side switching devices satisfies the restriction on current sensing with resistors and reduces the current in the capacitor at the same time. The work contributes to reducing the current in a practical configuration involving low-voltage vehicle components. [ABSTRACT FROM AUTHOR]
- Published
- 2019
- Full Text
- View/download PDF
15. An Improved Model Predictive Control Strategy to Reduce Common-Mode Voltage for Two-Level Voltage Source Inverters Considering Dead-Time Effects.
- Author
-
Guo, Leilei, Jin, Nan, Gan, Chun, Xu, Lie, and Wang, Qunjing
- Subjects
PREDICTIVE control systems ,ELECTRIC potential ,ELECTRIC inverters ,VOLTAGE control ,ELECTRIC currents - Abstract
To reduce the common-mode voltage (CMV) and eliminate the CMV spikes for two-level voltage source inverters (2L-VSIs), an improved model predictive control (MPC) based CMV reduction method is proposed in this paper considering dead-time effects. First, an improved voltage vector (VV) preselection strategy is proposed to reduce the CMV spikes caused by the dead time. Second, a new hybrid VV preselection strategy based on a delay compensation strategy and a modified current sector division strategy is proposed to completely eliminate the CMV spikes. As the proposed hybrid VV preselection based MPC strategy makes full use of the six nonzero VVs of the 2L-VSI, the current total harmonic distortions and ripples are reduced. The simulation and experiments are carried out to verify the effectiveness of the proposed strategy. [ABSTRACT FROM AUTHOR]
- Published
- 2019
- Full Text
- View/download PDF
16. A Flexible Discontinuous Modulation Scheme With Hybrid Capacitor Voltage Balancing Strategy for Three-Level NPC Traction Inverter.
- Author
-
Mukherjee, Sarbani, Giri, Santu K., and Banerjee, Subrata
- Subjects
CAPACITORS ,ELECTRIC inverters ,MULTILEVEL models ,ELECTRIC vehicles ,PULSE width modulation transformers ,INDUCTION motors ,SIMULATION methods & models - Abstract
Multilevel inverters are now-a-days being applied in electric vehicles (EV). Considering the dynamic operating conditions of an EV propelled by an induction motor, this paper proposes a flexible discontinuous modulation strategy for three-level neutral-point-clamped (NPC) inverter that can shift modulation pattern seamlessly from sinusoidal pulsewidth modulation (SPWM) to discontinuous PWM (DPWM). The modulation scheme is generalized at each degree of discontinuity to ensure minimum switching losses for variable load power factors. Additionally, a hybrid voltage balancing strategy, which comprises two sets of compensating offset signals with complementary features, has been introduced to mitigate voltage deviation problem at neutral point of the inverter. The unique feature of the proposed hybrid balancing approach is that it generates uniform compensating neutral current regardless of the level of discontinuity. This results in identical and predictable voltage balancing dynamics for the entire modulation transition covering SPWM and DPWM. It has been shown that the proposed hybrid balancing strategy does not lose its unbalance compensation strength even during transition from one modulation pattern to another. The effectiveness of the proposed scheme for wide variations in operating conditions is studied through extensive simulation, and validated in experimentation using a prototype NPC inverter with induction motor loads. [ABSTRACT FROM AUTHOR]
- Published
- 2019
- Full Text
- View/download PDF
17. DC Interference Modeling for Assessing the Impact of Sustained DC Ground Faults of Photovoltaic Systems on Third-Party Infrastructure.
- Author
-
Dimitriou, Andreas and Charalambous, Charalambos A.
- Subjects
PHOTOVOLTAIC power systems ,ELECTRIC interference ,ELECTRIC power system faults ,NATURAL gas pipelines ,ELECTRIC inverters - Abstract
In grounded photovoltaic (PV) systems, dc leakage to earth is formed by the contribution of the PV modules, inverters, and dc circuitry. Ground faults in such systems occur when there is an unintentional connection between any dc-carrying conductor with a grounded surface or earth. On the occurrence of ground faults, dc leakage will be intensified and will flow through the earth or other conductive paths, before returning back to the source. Thus, it is highly probable that some portion of the dc leakage will attempt to return to the source through any low-resistance paths that exist in the nearby vicinity, for example, through nearby buried pipelines. Therefore, unattended dc leakage may induce stray current corrosion concerns on these pipelines. To this extent, this paper presents a detailed dc interference modeling for assessing the dc leakage activity in PV systems—particularly under undetected fault conditions. First, the modeling carried out embraces the topologically accurate consideration of all sources of dc leakage that are associated with the grounded PV systems. A second feature presented in the paper is the modeling of blind-spot dc faults and their impact on third-party infrastructure. [ABSTRACT FROM AUTHOR]
- Published
- 2019
- Full Text
- View/download PDF
18. Analytical Evaluation and Reduction of Torque Harmonics in Induction Motor Drives Operated at Low Pulse Numbers.
- Author
-
Tripathi, Avanish and Narayanan, G.
- Subjects
INDUCTION motors ,ELECTRIC inverters ,TORQUE ,CONVERTERS (Electronics) ,HARMONIC analysis (Mathematics) ,PULSE width modulation transformers - Abstract
Induction motor drives operated with a low ratio of the switching frequency to the fundamental frequency (i.e., pulse number) are prone to have high magnitudes of low-order torque harmonics. This paper proposes a method to analytically evaluate the harmonic torque spectrum based on the pulsewidth-modulated voltage waveforms for low pulse number operation. The predicted torque harmonic spectra for different pulsewidth-modulated waveforms are validated through simulations and experiments. This paper also reports optimal switching angles to minimize the total rms value of torque harmonics of order 6, 12, 18 $,\dots,$ $6(N-1)$ , considering the number of switching angles per quarter ($N$) to be 4 and 5. Compared to sine triangle pulsewidth modulation and selective harmonic elimination pulsewidth modulation with the same pulse number, the proposed optimal switching angles significantly reduce the total rms value of all harmonic torques of order lower than $6N$. Extensive simulation and experimental results on a 3.7-kW induction motor drive are presented to demonstrate the superior performance of the proposed optimal pulsewidth modulation. [ABSTRACT FROM AUTHOR]
- Published
- 2019
- Full Text
- View/download PDF
19. Accurate Modeling of the Nonlinear Characteristic of a Voltage Source Inverter for Better Performance in Near Zero Currents.
- Author
-
Seyyedzadeh, Seyyed Mohammad and Shoulaie, Abbas
- Subjects
IDEAL sources (Electric circuits) ,ELECTRIC inverters ,SENSORLESS control systems ,SEMICONDUCTORS ,CAPACITORS ,VOLTAGE control - Abstract
In a sensorless vector control method, at low speeds and self-commissioning for AC motors, it is necessary to model dead time, rise/fall time, parasitic capacitors, and semiconductors’ voltage drop accurately. In this paper, voltage drop in each phase due to the nonlinear behavior of the inverter from the control system's viewpoint is precisely modeled by using two lookup tables. These lookup tables make the proposed model robust against the dc-link voltage and carrier frequency variations in the entire current range. In conventional methods at standstill, the measured voltage in the dc current test contains the nonlinearity of two phases. Therefore, to obtain the nonlinear voltage of each inverter phase, it is assumed that the values of inverter nonlinearity voltage at both high current and low current are equal. This simplification leads to distortion in measured voltage in the low currents. However, in this paper, the voltage drop equation of each phase is solved by numerical method that is realizable in conventional processors. The results obtained in actual voltage measurement show the superiority of the proposed method over traditional methods in the low currents. The proposed method is verified by using a voltage source inverter feeding a 2.2-kW three-phase induction motor. [ABSTRACT FROM AUTHOR]
- Published
- 2019
- Full Text
- View/download PDF
20. Combined Bidirectional Buck–Boost DC–DC Chopper-Mode Inverters With High-Frequency Link.
- Author
-
Chen, Daolian and Chen, Sheng
- Subjects
ELECTRIC inverters ,CHOPPER circuits ,SWITCHING circuits ,CLAMPING circuits ,TOPOLOGY - Abstract
A circuit configuration, a circuit topological family, a buck-mode active clamped circuit, and an instantaneous output voltage feedback control strategy of combined bidirectional buck–boost dc–dc chopper-mode inverter with high-frequency (HF) link (HFL) were proposed and fully investigated in this paper. The steady principle characteristic and the design criteria for the key circuit parameters were given in this paper. The circuit configuration is composed of two identical isolated bidirectional buck–boost dc–dc choppers with the same input and output filters. These two choppers in parallel at input end and in series at output end generate unipolarity sinusoidal pulsewidth modulation current waveforms with positive and negative half low-frequency cycles separately. The circuit topological family includes four circuit topologies, such as one-transistor mode. Taking the one-transistor mode circuit topology as an example, the 750VA48VDC/220V50HzAC prototype is designed and implemented. The theoretical analysis and principle test show the inverters have excellent performance. [ABSTRACT FROM PUBLISHER]
- Published
- 2014
- Full Text
- View/download PDF
21. Economical Design of Utility-Scale Photovoltaic Power Plants With Optimum Availability.
- Author
-
Moradi-Shahrbabak, Zahra, Tabesh, Ahmadreza, and Yousefi, Gholam Reza
- Subjects
PHOTOVOLTAIC power systems ,ELECTRIC rates ,ELECTRIC power production ,ELECTRIC inverters ,RENEWABLE energy sources - Abstract
This paper presents an algorithm for the economical design of a utility-scale photovoltaic (PV) power plant via compromising between the cost of energy and the availability of the plant. The algorithm inputs are the plant peak power and the price of inverters with respect to their power ratings. The outputs are the optimum inverter ratings and the interconnection topology of PV panels. This paper introduces the effective levelized cost of energy (LCOE) (ELCOE) index as the core of the proposed design algorithm. ELCOE is an improved index based on the conventional LCOE that includes the availability of a power plant in economical assessments. The conventional LCOE index determines centralized topology (e.g., 1-MW inverter for a 1-MW PV power plant) for minimizing the energy generation cost, whereas based on ELCOE, a multistring topology (e.g., a 1-MW PV plant consists of fifty 20-kW inverters) despite of higher investment cost becomes the economically winning topology. Given the price of commercially available PV inverters at present, the case studies in this paper show that, for 0.1–100-MW PV power plants, the economical ratings of inverters range from 8 to 100 kW. The recently installed PV power plants confirm the feasibility of the calculations based on the suggested algorithm. [ABSTRACT FROM PUBLISHER]
- Published
- 2014
- Full Text
- View/download PDF
22. Waveform Equations, Output Power, and Power Conversion Efficiency for Class-E Inverter Outside Nominal Operation.
- Author
-
Nagashima, Tomoharu, Wei, Xiuqin, Suetsugu, Tadashi, Kazimierczuk, Marian K., and Sekiya, Hiroo
- Subjects
POWER electronics ,ELECTRIC inverters ,DIODES ,SIMULATION methods & models ,ELECTRIC currents ,COMPUTER software - Abstract
This paper presents analytical expressions for steady-state waveforms, output power, and power conversion efficiency for the class-E inverter outside the class-E zero-voltage switching and zero-derivative switching conditions. The analytical expressions in this paper include the MOSFET-body-diode effect. By carrying out PSpice simulations and circuit experiments, it is shown that the analytical predictions agree with the simulated and experimental results quantitatively, which indicates the validity of the analytical expressions. Additionally, the switching-pattern distribution maps are also given by using the analytical waveform equations. [ABSTRACT FROM PUBLISHER]
- Published
- 2014
- Full Text
- View/download PDF
23. Theoretical and Experimental Analysis for Current in a Dual-Inverter-Fed Open-End Winding Induction Motor Drive With Reduced Switching PWM.
- Author
-
Srinivas, S. and Ramachandra Sekhar, K.
- Subjects
IDEAL sources (Electric circuits) ,ELECTRIC inverters ,INDUCTION motors ,AUTOMOBILE engines ,ALGORITHMS - Abstract
A dual two-level voltage source inverter (VSI) can synthesize a three-level voltage space vector employing an open-end winding induction motor. Space-vector-based pulsewidth modulation (PWM) variants for this dual VSI are proposed in this paper that offer the dual advantage of limiting the switching power loss to a single VSI at all instants and also reducing the switching commutations in the dual VSI by 50%. The influence of different error volt seconds (affected with different PWM variants) on the motor phase current in the dual VSI is critically analyzed. To this end, two analytical approaches (one using error-voltage trajectory information and the other using switching state information of the dual VSI) are also proposed in this paper to predict the current trajectory and the ripple content in the drive system. Expressions for rms ripple current are developed with different PWM variants. The efficacy of the proposed analytical approaches to predict the current trajectory and the ripple content is confirmed from the experimental results. All the PWM variants are first simulated using MATLAB and verified experimentally by conducting tests on a three-phase open-end winding induction motor drive controlled with volts per hertz control. The implementation of the PWM algorithms only requires instantaneous magnitudes of three-phase reference voltages and completely avoids the sector identification and lookup tables. [ABSTRACT FROM PUBLISHER]
- Published
- 2013
- Full Text
- View/download PDF
24. A DC-Side Sensorless Cascaded H-Bridge Multilevel Converter-Based Photovoltaic System.
- Author
-
Farivar, Ghias, Hredzak, Branislav, and Agelidis, Vassilios G.
- Subjects
CASCADE converters ,PHOTOVOLTAIC cells ,ELECTRIC potential ,ELECTRIC inverters ,DETECTORS - Abstract
In this paper, a cascaded H-Bridge (CHB)-multilevel converter (MC)-based photovoltaic (PV) system with no voltage or current sensors at the dc-side is proposed. Eliminating the dc-side sensors simplifies the hardware, leading to lower cost and higher reliability of the PV system. A novel scheme estimating the capacitors’ voltages from the ac output voltage of the inverter is developed. The scheme allows replacing all dc-side voltage sensors by a single-voltage sensor at the ac-side of the converter. Furthermore, the dc current sensors, conventionally required for the maximum power point tracking (MPPT), are also eliminated. Instead, the outputs from the capacitors’ voltage control systems are utilized for the MPPT. The effectiveness of the proposed dc-side sensorless system is experimentally demonstrated on a 2-kW single-phase seven-level CHB converter-based PV system. [ABSTRACT FROM PUBLISHER]
- Published
- 2016
- Full Text
- View/download PDF
25. Model Predictive Control in the Multi-Megawatt Range.
- Author
-
Besselmann, Thomas J., Van de moortel, Sture, Almer, Stefan, Jorg, Pieder, and Ferreau, Hans Joachim
- Subjects
PREDICTIVE control systems ,ELECTRIC current rectifiers ,ELECTRIC inverters ,PILOT plants ,ALGORITHMS - Abstract
This paper presents an application of model predictive control to a variable-speed drive system operating in the multi-megawatt range. The variable-speed drive system comprises a synchronous machine fed by a line-commutated rectifier and a load-commutated inverter. The control task is to regulate the dc-link current, and hence the machine torque, to ensure the machine speed follows a given reference. The proposed control approach is model predictive control, where both the rectifier- and inverter-firing angles are considered as control inputs. The nonlinear model predictive torque controller has been implemented on an embedded system and applied in an industrial-scale pilot plant installation. The experiments show the successful operation of model predictive control on a plant with more than 48 MW power. [ABSTRACT FROM PUBLISHER]
- Published
- 2016
- Full Text
- View/download PDF
26. Simple Time Averaging Current Quality Evaluation of a Single-Phase Multilevel PWM Inverter.
- Author
-
Reznikov, Boris, Srndovic, Milan, Familiant, Yakov L., Grandi, Gabriele, and Ruderman, Alex
- Subjects
PULSE width modulation transformers ,HARMONIC distortion (Physics) ,ELECTRIC inverters ,PIECEWISE constant approximation ,ELECTRIC inductance - Abstract
This paper addresses theoretical calculation of a single-phase multilevel pulsewidth modulation (PWM) inverter current total harmonic distortion (THD). Analytical approach introduced in late 1980s for a two-level inverter is generalized for an arbitrary level count for a single-phase inverter. Although the obtained closed-form piecewise analytical solutions assume (infinitely) large ratio of switching and fundamental frequencies and pure inductive load, they are practically very accurate for the ratios of (apparent) switching and fundamental frequencies larger than 25–30 and inductance-dominated loads. Along with strict mathematical solutions, simple accurate Bessel function approximation and hyperbolic average trend one are suggested. The formulas clearly reveal a single-phase PWM inverter current THD dependence on modulation index for an arbitrary voltage level count and are easily modified to cover grid-connected cases. [ABSTRACT FROM PUBLISHER]
- Published
- 2016
- Full Text
- View/download PDF
27. Theoretical and Experimental Evaluation of Pulsating Torque Produced by Induction Motor Drives Controlled With Advanced Bus-Clamping Pulsewidth Modulation.
- Author
-
Pavan Kumar Hari, V. S. S. and Narayanan, G.
- Subjects
INDUCTION motors ,PULSE width modulation ,TORQUE control ,HARMONIC functions ,ELECTRIC inverters - Abstract
This paper investigates possible reduction of pulsating torque in open-loop and vector-controlled induction motor drives through deployment of certain advanced bus-clamping pulsewidth modulation (ABCPWM) method. Toward this goal, a simple and machine-independent method is proposed to analyze the torque harmonic spectrum of a voltage source inverter fed induction motor, operated with any real-time pulsewidth modulation (PWM) method. The analytically evaluated torque harmonic spectra, pertaining to conventional space vector PWM (CSVPWM), bus-clamping PWM (BCPWM), and ABCPWM, are validated through simulation and experimental results. Theoretical and experimental studies bring out the superiority of the ABCPWM in terms of torque harmonics over CSVPWM and BCPWM. The magnitude of the dominant torque harmonic with the ABCPWM scheme is shown to be significantly lower than that with CSVPWM, over a wide range of speed. The rms torque ripple (i.e., total rms value of all harmonic torques) is lower with ABCPWM than with BCPWM over the entire range of speed. [ABSTRACT FROM PUBLISHER]
- Published
- 2016
- Full Text
- View/download PDF
28. Fault-Tolerant Inverter for Power Flow Control in Variable-Speed Four-Wire Permanent-Magnet Generators.
- Author
-
Catuogno, Guillermo R., Garcia, Guillermo O., and Leidhold, Roberto
- Subjects
PERMANENT magnet generators ,FAULT tolerance (Engineering) ,ELECTRIC inverters ,CAPACITORS ,ELECTRIC circuits ,VOLTAGE control - Abstract
A strategy for fault detection and tolerance on the inverter that controls power flow in variable-speed permanent-magnet generators is proposed in this paper. The performance of the proposed strategy is analyzed in two different four-wire topologies. In the first topology, the neutral point of the generator is connected to the middle point of the dc-link capacitor bank, whereas in the second topology, it is connected to a fourth leg of the inverter. The main contribution of this paper resides in the control scheme, which allows a steady operation through a fault occurrence without the need of reconfiguring neither the inverter topology nor the control algorithm. In this way, transients and the use of extra hardware components are avoided. In addition, a control loop that allows limiting the generator losses at any operation point is presented in order to protect the machine. Finally, experimental results, obtained from a laboratory prototype, validate the practical feasibility of the proposed strategy. [ABSTRACT FROM PUBLISHER]
- Published
- 2015
- Full Text
- View/download PDF
29. Stability Improvement of Interleaved Voltage Source Inverters Employing Coupled Inductors for Grid-Connected Applications.
- Author
-
Shin, Dongsul, Lee, Jong-Pil, Yoo, Dong-Wook, and Kim, Hee-Je
- Subjects
DISTRIBUTED power generation ,ELECTRIC power system harmonics ,ELECTRIC inductors ,ELECTRIC controllers ,ELECTRIC inverters - Abstract
A merit of the interleaving reducing the switching harmonics allows for the reduction of the filter inductance. However, in the case of direct parallel voltage source inverters (VSIs), a severe circulating current occurs. To suppress the high frequency circulating current, coupled inductors (CIs) for the high impedance is inserted. However, the employed CIs induce a positive- or negative-sequence circulating current (i.e., a cross current) besides the zero-sequence circulating current already mentioned in the other papers. Due to different impedances developed by the current characteristics and the cross current in the CIs, VSIs becomes unstable when the resonant controllers are applied for the harmonic compensation such as 5, and 7th harmonics. In this paper, the cross currents and the impedances of CIs varying with the current characteristics are mathematically analyzed, and a novel current controller is proposed to solve this stability problem. The experimental results validate the proposed control scheme. [ABSTRACT FROM PUBLISHER]
- Published
- 2015
- Full Text
- View/download PDF
30. Control Method for Mono Inverter Dual Parallel Surface-Mounted Permanent-Magnet Synchronous Machine Drive System.
- Author
-
Lee, Yongjae and Ha, Jung-Ik
- Subjects
PERMANENT magnet motors ,MOTOR drives (Electric motors) ,ELECTRIC inverters ,DAMPING (Mechanics) ,COMMAND & control systems - Abstract
This paper presents the control method for mono inverter dual parallel (MIDP) surface-mounted permanent-magnet synchronous motor (SPMSM) drive system. Unlike the MIDP induction machine drive system, MIDP SPMSM drive system suffers from the inherent instability due to the lack of slip. The proposed active damping control method refrains the system oscillation coming from the mechanical and electrical unbalances and enables the stable operation. This paper also presents the simple maximum torque per ampere control method for MIDP SPMSM drive system. Mathematically calculated optimal currents reduce the amplitude of the currents and improve the drive efficiency. To maximize the merits of the MIDP motor drive system, a sensorless algorithm is also applied. Experiments with the 600-W SPMSMs are executed to verify the feasibility of the proposed control method. [ABSTRACT FROM PUBLISHER]
- Published
- 2015
- Full Text
- View/download PDF
31. Soft-Stop Optimal Trajectory Control for Improved Performance of the Series-Resonant Multiinverter for Domestic Induction Heating Applications.
- Author
-
Lucia, Oscar, Sarnago, Hector, and Burdio, Jose M.
- Subjects
INDUCTION heating ,ROBOTIC trajectory control ,ELECTRIC inverters ,HOUSEHOLD appliances ,RESONANT power convertors - Abstract
Induction heating technology is leading technical advances in home appliances due to the benefits inherent to the contactless energy transfer including high efficiency, fast heating, safety, cleanness, and accurate control, among others. Recent design trends are focused on developing more versatile cooking appliances for an improved user performance. To achieve such implementations, new multicoil architectures and power converters must be developed. This paper proposes the series-resonant multiinverter as an efficient, versatile, and cost-effective alternative to supply multiinductor systems. One of the main design challenges is the high blocking voltage of power devices, which may compromise the converter performance. This paper proposes an optimized modulation strategy to reduce the maximum device voltage, enabling an optimized converter design with improved reliability and performance. The proposed modulation is analytically studied and tested using a multicoil induction heating converter prototype, proving the feasibility of this proposal. [ABSTRACT FROM PUBLISHER]
- Published
- 2015
- Full Text
- View/download PDF
32. Single-Loop Digital Control of High-Power 400-Hz Ground Power Unit for Airplanes.
- Author
-
Zixin Li, Yaohua Li, Ping Wang, Haibin Zhu, Congwei Liu, and Fanqiang Gao
- Subjects
BANDWIDTHS ,DIGITAL control systems ,ELECTRIC inverters ,UNINTERRUPTIBLE power supply ,CAPACITORS ,ELECTRIC inductors - Abstract
Abstract-In this paper, the influence of one-sample delay for sampling and computation in digital control on the bandwidth of the inner current loop of a 400-Hz ground power unit (GPU) is analyzed first. The results show that it is difficult and even impossible for high-power 400-Hz GPUs to maintain low total harmonic distortion content in the output voltage with the conventional proportional-integral-based double-loop control. To improve the performance, resonant controllers with parallel structure which are widely used in active power filters are applied to the single-loop control of the 400-Hz GPU. The parameter design criterion for the parallel resonant controllers is discussed in the discrete time domain. Meanwhile, adoption of-proportional gain in the single-loop control is investigated. The results show that it can improve the performance little and may cause instability problems. Comparisons between different control methods for the 400-Hz GPU are also made, and the single-loop control method in this paper seems to be the most suitable one in terms of simplicity and performance. Experiments on a 16-b fixed-point DSP-controlled 90-kVA 400-Hz GPU prototype show satisfactory results of the single-loop method feeding linear/nonlinear and balanced/unbalanced loads. [ABSTRACT FROM AUTHOR]
- Published
- 2010
- Full Text
- View/download PDF
33. Modulation Schemes of the Three-Phase Impedance Source Inverters?Part I: Classification and Review.
- Author
-
Abdelhakim, Ahmed, Blaabjerg, Frede, and Mattavelli, Paolo
- Subjects
ELECTRIC inverters ,ELECTRIC current converters ,ELECTRONIC modulators ,ELECTRIC impedance ,ELECTRICAL harmonics - Abstract
Impedance source inverters have experienced a fast evolution since the first release of the Z-source inverter in 2003. This evolution is not limited to improving the structure of the different topologies but also includes their modulation and control schemes in order to reinforce their performance from many perspectives. Accordingly, many modulation schemes have been proposed in different research activities, but the full differences among these modulation schemes, including their effect on the switching losses, are not clear yet to the researchers. Hence, this research activity is aimed at introducing a comprehensive review of these different modulation schemes employed for the three-phase impedance source inverters, which is enhanced with a comparative assessment. In this paper, different modulation schemes are classified and reviewed, introducing an important benchmark in order to identify the basic differences between these modulation schemes. In other words, from this paper, the concept of classifying the different modulation schemes and the mandatory equations to implement each scheme can easily be drawn. Moreover, this review is essential for the next part, i.e., Part II, in which a comparative assessment is introduced. [ABSTRACT FROM PUBLISHER]
- Published
- 2018
- Full Text
- View/download PDF
34. Two Symmetric Extended-Boost Embedded Switched-Inductor Quasi-Z-Source Inverter With Reduced Ripple Continuous Input Current.
- Author
-
Abbasi, Milad, Eslahchi, Amir Hosein, and Mardaneh, Mohammad
- Subjects
ELECTRIC inverters ,ELECTRIC inductors ,SWITCHING theory ,ELECTRIC currents ,ELECTRIC potential ,PULSE width modulation - Abstract
In this paper, two structures are proposed for the switched-inductor quasi-Z-source inverter. In the proposed structures to extend the voltage gain of inverter, two new switched-inductor structures are used. In the proposed structures, voltage across the capacitors in the Z-source network and in the switched-inductor is symmetric and small. The other advantage of proposed inverters is known as achieving higher voltage gain per smaller duty cycle ratio (of shoot-through). Compared with a conventional continuous input current switched-inductor quasi-Z-source inverter at the same gain voltage, there is less of a ripple of input current in the proposed inverters. In this paper, at first the both the conventional and the proposed switched-inductor Z-source inventers are thoroughly investigated to find out their governing relations. Then, the proposed Z-source inverters are compared with the conventional ones by simulating them to assess their performance efficiency. Next, applying the simple boost pulse width modulation the simulation is carried out with PSCAD/EMTDC software. After that, to evaluate the obtained results, the prototypes of the proposed inverters with 48 Vdc input voltage are used. [ABSTRACT FROM PUBLISHER]
- Published
- 2018
- Full Text
- View/download PDF
35. Combination Analysis and Switching Method of a Cascaded H-Bridge Multilevel Inverter Based on Transformers With the Different Turns Ratio for Increasing the Voltage Level.
- Author
-
Lee, June-Seok, Sim, Hyun-Woo, Kim, Juyong, and Lee, Kyo-Beum
- Subjects
ELECTRIC inverters ,SWITCHING theory ,VOLTAGE control ,ELECTRIC transformers ,ELECTRIC switchgear ,TOPOLOGY - Abstract
This paper analyzes the combination in a cascaded H-bridge multilevel inverter (CHBI) based on transformers with the different turn ratios for increasing the voltage level and proposes the switching method for achieving the output voltage distribution among H-bridge cells (HBCs). The transformers used in this paper are connected to the output of the respective HBCs, and the secondary sides of all the transformers are connected in series for generating the final output voltage. Only one of the transformers, in particular, has a different turn ratio for increasing the output voltage level. In this paper, the possible turn ratio of the special transformer with a different turn ratio is discussed in detail, and a switching method based on the level-shifted switching method for the topology used in this paper is proposed. To verify the effectiveness of the proposed method, a three-phase 21-level CHBI is experimentally tested. [ABSTRACT FROM PUBLISHER]
- Published
- 2018
- Full Text
- View/download PDF
36. A Z-Source-Derived Coupled-Inductor-Based High Voltage Gain Microinverter.
- Author
-
Surapaneni, Ravi K. and Das, Pritam
- Subjects
ELECTRIC inverters ,DIRECT currents ,ELECTRIC potential ,ELECTRIC inductors ,IMPEDANCE parameters (Computer networks) ,PHOTOVOLTAIC effect - Abstract
Microinverters require high voltage gain capability for interfacing the low dc voltage output of photovoltaic (PV) module to single-phase ac grid. A two-stage nonisolated inverter is proposed in this paper, with a first boost stage and a second traditional pulse width modulated grid-tied inverter stage. The proposed boost stage consists of a coupled inductor added with a voltage multiplier to achieve the required high voltage gain at high efficiency and to operate over a wide input voltage range. Among the coupled inductor topologies, adding a clamp circuit is a common solution to limit the voltage spike caused by leakage inductance. In the proposed converter, the resonance between the coupled inductor and voltage multiplier is used to address the issue of voltage spike, thereby reducing both component count and device voltage stress. Detailed analysis and design procedure of the proposed converter is presented in this paper. Experimental results of a 250-W microinverter are presented to validate the proposed converter. [ABSTRACT FROM PUBLISHER]
- Published
- 2018
- Full Text
- View/download PDF
37. Efficiency of a CVT-Operated EVT Experimentally Evaluated Against Half-Toroidal and Push-Belt CVTs.
- Author
-
Druant, Joachim, Vansompel, Hendrik, De Belie, Frederik, and Sergeant, Peter
- Subjects
CONTINUOUSLY variable transmission ,ELECTRIC motors ,ELECTRIC power ,ELECTRIC inverters ,NUMERICAL analysis - Abstract
This paper describes how an electrical variable transmission (EVT) can be used as an alternative for mechanical continuously variable transmission (CVT) systems. An EVT is an electromagnetic power split device having two mechanical and two electrical ports. The speed ratio between both mechanical ports (rotors) can be varied in a continuously variable way, so that this machine can be used as an electromagnetic alternative for the mechanical push-belt and half-toroidal CVT. Its operating principle is based on splitting the power into an electromagnetic direct path and an electrical path involving two inverters connected back to back. Its potential use as a CVT is investigated by comparing experimental data against toroidal and belt CVT data from literature having comparable power ratings. To this end, measurements are performed on a prototype \text120-kW permanent magnet EVT. [ABSTRACT FROM AUTHOR]
- Published
- 2018
- Full Text
- View/download PDF
38. New Half-Bridge and Full-Bridge Topologies for a Switched-Boost Inverter With Continuous Input Current.
- Author
-
Asl, Elias Shokati, Babaei, Ebrahim, Sabahi, Mehran, Hasan Babayi Nozadian, Mohsen, and Cecati, Carlo
- Subjects
ELECTRIC inverters ,ELECTRIC currents ,ELECTRIC potential ,AUTOMATIC control systems ,NUMERICAL analysis - Abstract
In this paper, new half-bridge and full-bridge topologies for a switched-boost inverter are proposed. These topologies have a high boost factor in comparison with conventional types. In addition, the proposed topologies have continuous input current and can generate zero-voltage level in output. In this paper, the operation of the proposed inverters in different operating modes is analyzed. Then, the values of inductors and capacitors are designed. Moreover, the used switching pattern and its logical diagram are introduced. A comprehensive comparison between the proposed and conventional topologies in terms of the boost factor, the number of elements, and the efficiency shows the good features of the proposed inverters. Finally, to verify correct operation of the proposed topologies and derived equations, simulation and experimental results are presented. [ABSTRACT FROM AUTHOR]
- Published
- 2018
- Full Text
- View/download PDF
39. Digital Current Controller With Error-Free Feedback Acquisition and Active Resistance.
- Author
-
Vukosavic, Slobodan N., Peric, Ljiljana S., and Levi, Emil
- Subjects
ALTERNATING current electric motors ,PERMANENT magnet motors ,VOLTAGE regulators ,FEEDBACK control systems ,ELECTRIC inverters ,COMPUTER simulation - Abstract
Digital current controllers have the key impact on the performance of grid-side converters and ac drives. The voltage disturbances are commonly suppressed by enhancing the controller with an inner active resistance feedback. In cases where the switching noise and parasitic oscillations introduce sampling errors, conventional sampling is replaced by the oversampling-based error-free feedback acquisition which derives the average of the measured currents over the past switching period. The time delay introduced into the feedback path creates difficulties in designing the current controller with the active resistance. In this paper, we introduce a novel structure of the current controller, which includes the error-free sampling and the active resistance feedback. Devised structure improves the disturbance rejection by extending the range of permissible values of the active resistance. Controller structure is based on the internal model principles, and it maintains the input step response unaffected. This paper comprises analytical design, the gain setting procedure, computer simulation, and experimental results obtained from an experimental setup with a three-phase inverter, digital controller, and a permanent-magnet synchronous motor. [ABSTRACT FROM PUBLISHER]
- Published
- 2018
- Full Text
- View/download PDF
40. A Novel Carrier-Based Hybrid PWM Technique for Minimization of Line Current Ripple in Two Parallel Interleaved Two-Level VSIs.
- Author
-
Shukla, Kapil, Malyala, Varun, and Maheshwari, Ramkrishan
- Subjects
PULSE width modulation transformers ,VOLTAGE regulators ,ELECTRIC currents ,ELECTRIC inverters ,EXPERIMENTS - Abstract
A novel hybrid pulse width modulation (PWM) technique is proposed in this paper for two parallel interleaved, two-level, three-phase voltage source inverters (VSIs). The two parallel interleaved VSIs are analyzed as a three-level (3L) inverter. A 3L inverter provides minimum line current ripple when nearest three voltage vectors are applied. In this paper, a novel carrier-based PWM technique is developed that ensures the application of nearest voltage vectors, keeping average circulating current to zero over a switching period. For carrier-based implementation of the proposed PWM, generalized common-mode (CM) offsets are derived in terms of maximum and minimum values of reference signals. Each 3L space-vector sector is divided into seven subsectors. For each subsector, a CM offset is calculated, addition of which to reference signals ensures the minimum line current ripple and zero average circulating current. Simulation and experimental results are provided to validate the proposed technique. [ABSTRACT FROM PUBLISHER]
- Published
- 2018
- Full Text
- View/download PDF
41. Comparison of SiC Voltage Source Inverters Using Synchronous Rectification and Freewheeling Diode.
- Author
-
Yin, Shan, Liu, Yitao, Liu, Yong, Tseng, King Jet, Pou, Josep, and Simanjorang, Rejeki
- Subjects
ELECTRIC potential ,CONVERTERS (Electronics) ,CONDUCTION electrons ,DIODES ,ELECTRIC inverters - Abstract
For power converters with inductive loads, a freewheeling path is needed for the current due to reactive power. The
MOSFET synchronous rectification (SR) is widely used to reduce the conduction loss during the freewheeling period. Due to the wide band gap of silicon carbide (SiC), the intrinsic body diode of SiCMOSFET exhibits a high voltage drop. Hence, an antiparallel SiC Schottky diode is normally implemented to eliminate its conduction. However, the external SiC Schottky diode is not fully utilized as it only works during the dead time. In this paper, the hard-switching SR is investigated in an SiC three-phase inverter and compared with a conventional inverter using freewheeling diode (FWD). An improved power loss model for the two inverters has been developed. It is found that the inverter using SR has higher efficiency due to the smaller switching loss. A 7-kW prototype of SiC three-phase inverter is built, which achieves a peak efficiency of 98.8% ($\pm$ 0.15%) and 98.5% ($\pm$ 0.15%) at 40 kHz using SR and FWD, respectively. This paper confirms that the SiCMOSFET is an ideal candidate for the SR. [ABSTRACT FROM PUBLISHER]- Published
- 2018
- Full Text
- View/download PDF
42. Leakage Current Mitigation in Photovoltaic String Inverter Using Predictive Control With Fixed Average Switching Frequency.
- Author
-
Rojas, Christian A., Aguirre, Matias, Kouro, Samir, Geyer, Tobias, and Gutierrez, Eduardo
- Subjects
PHOTOVOLTAIC power systems ,STRAY currents ,ELECTRIC inverters ,PREDICTIVE control systems ,VOLTAGE control - Abstract
This paper proposes and validates model predictive control as an alternative control strategy for H-bridgeneutral-point-clamped (H-NPC) converters for single-phase grid-tied string photovoltaic (PV) systems. The presented control scheme achieves good quality current waveforms with unity power factor, dc-link voltage control, and neutral-point voltage minimization. Furthermore, the predictive controller has been further enhanced by including an average device switching frequency restriction and a $dv/dt$ mitigation. The main contribution of this paper is the avoidance of the potential leakage current due to parasitic capacitance of the PV modules by using a predictive model based control technique instead of modulated schemes and eliminating high-frequency common-mode voltage components. Experimental results during steady state and dynamic operation are presented to illustrate the behavior of the H-NPC converter commanded by the proposed control scheme. [ABSTRACT FROM AUTHOR]
- Published
- 2017
- Full Text
- View/download PDF
43. Power Decoupling Method for Single-Phase H-Bridge Inverters With No Additional Power Electronics.
- Author
-
Serban, Ioan
- Subjects
ELECTRIC inverters ,SINGLE-phase flow ,POWER semiconductors ,PULSATION (Electronics) ,CAPACITORS - Abstract
An active method for double-frequency power ripple decoupling in single-phase inverters is presented in this paper, exhibiting the main advantage of not using additional power semiconductors besides the H-bridge. The proposed method requires only two capacitors placed between the midpoint and one end of each inverter leg. An original control solution of the inverter ensures the power ripple transfer toward the two decoupling capacitors without affecting the inverter output voltage. The simple design makes the proposed solution easy to adapt for single-phase inverters in H-bridge configuration. This paper focuses on the autonomous operation mode of the inverter, detailing its operating principle and the control analysis. The system performances, including the impact of the decoupling circuit on the inverter efficiency, are assessed by means of experimental results. [ABSTRACT FROM PUBLISHER]
- Published
- 2015
- Full Text
- View/download PDF
44. Dead-Time Effect Compensation Based on Additional Phase Current Measurements.
- Author
-
Lewicki, Arkadiusz
- Subjects
IDEAL sources (Electric circuits) ,ELECTRIC circuits ,PERFORMANCE of analog-to-digital converters ,PULSE width modulation transformers ,ELECTRIC inverters - Abstract
This paper proposes a new method of dead-time effect compensation. The proposed solution is based on additional phase current measurements realized by analog-to-digital converters. These measurements are carried out at the time instants specified by a pulsewidth-modulation (PWM) strategy. This makes it possible to estimate inverter currents at the commutation instants and, finally, to estimate the voltage error caused by dead time. This voltage error is compensated during the next switching period by modification of a reference voltage. The proposed solution can be used to compensate the voltage error in multilevel multiphase voltage source inverters. The experimental research studies were carried out on three-phase two-level and three-level neutral-point-clamped inverters supplying 55- and 160-kW motors, respectively. The results of the experimental investigations are presented in this paper. [ABSTRACT FROM PUBLISHER]
- Published
- 2015
- Full Text
- View/download PDF
45. An Enhanced Voltage Sag Compensation Scheme for Dynamic Voltage Restorer.
- Author
-
Rauf, Abdul Mannan and Khadkikar, Vinod
- Subjects
ELECTRIC potential ,ELECTRIC inverters ,DC-to-DC converters ,ELECTRIC current converters ,CAPACITORS - Abstract
This paper deals with improving the voltage quality of sensitive loads from voltage sags using a dynamic voltage restorer (DVR). The higher active power requirement associated with voltage phase jump compensation has caused a substantial rise in size and cost of the dc link energy storage system of DVR. The existing control strategies either mitigate the phase jump or improve the utilization of dc link energy by the following: 1) reducing the amplitude of the injected voltage or 2) optimizing the dc bus energy support. In this paper, an enhanced sag compensation strategy is proposed, which mitigates the phase jump in the load voltage while improving the overall sag compensation time. An analytical study shows that the proposed method significantly increases the DVR sag support time (more than 50%) compared with the existing phase jump compensation methods. This enhancement can also be seen as a considerable reduction in dc link capacitor size for new installation. The performance of the proposed method is evaluated using simulation study and finally verified experimentally on a scaled laboratory prototype. [ABSTRACT FROM PUBLISHER]
- Published
- 2015
- Full Text
- View/download PDF
46. Adding Inverter Fault Detection to Model-Based Predictive Control for Flying-Capacitor Inverters.
- Author
-
Druant, Joachim, Vyncke, Thomas, De Belie, Frederik, Sergeant, Peter, and Melkebeek, Jan
- Subjects
ELECTRIC inverters ,POWER electronics ,INDUCTION machinery ,ALGORITHMS ,COMPUTER simulation - Abstract
As inverters are often used in critical applications, reliability is an important issue. In particular, the power electronic switches and gate drivers, the most essential components of the inverter, are vulnerable parts in real live operation. Therefore, this paper focuses on open-switch fault detection for multilevel inverters. When a single-switch open-circuit fault occurs in one of the power electronic switches, the algorithm can detect the fault and the switch that is causing it. The detection is worked out for both a linear resistive inductive load and an induction motor. The proposed algorithm is an extension of an already available finite-set model-based predictive control algorithm. Therefore, no extra hardware or measurements are required. This paper also discusses a suggested method for reconfiguration after fault detection. Computer simulation and experimental verifications validate the proposed methods. [ABSTRACT FROM PUBLISHER]
- Published
- 2015
- Full Text
- View/download PDF
47. A Quad Two-Level Inverter Configuration for Four-Pole Induction-Motor Drive with Single DC Link.
- Author
-
N., Kiran Kumar and Sivakumar, K.
- Subjects
ELECTRIC inverters ,INDUCTION motors ,PULSE width modulation ,ELECTRICAL harmonics ,ELECTRONIC modulation - Abstract
A multilevel inverter topology for a four-pole induction-motor drive is presented in this paper, which is constructed using the induction-motor stator winding arrangement. A single dc source with a less magnitude when compared with conventional five-level inverter topologies is used in this topology. Therefore, power balancing issues (which are major challenges in conventional multilevel inverters) are minimized. As this configuration uses a single dc source, it provides a path for zero-sequence currents because of the zero-sequence voltages present in the output, which will flow through the motor phase winding and power electronic switches. To minimize these zero-sequence currents, sine–triangle pulsewidth modulation (SPWM) is used, which will shift the lower order harmonics near to switching frequency in the linear modulation region. However, in the case of overmodulation, harmonic voltages will be introduced close to the fundamental frequency. In this regard, a modified SPWM technique is proposed in this paper to operate the drive in the overmodulation region up to the modulation index of 2/\!\surd3. The proposed quad two-level inverter topology is experimentally verified with a laboratory prototype on a four-pole 5-hp induction motor. Experimental results show the effectiveness of the proposed topology in the complete linear modulation region and the overmodulation region. [ABSTRACT FROM PUBLISHER]
- Published
- 2015
- Full Text
- View/download PDF
48. Modeling, Impedance Design, and Efficiency Analysis of Quasi- $Z$ Source Module in Cascaded Multilevel Photovoltaic Power System.
- Author
-
Sun, Dongsen, Ge, Baoming, Yan, Xingyu, Bi, Daqiang, Zhang, Hao, Liu, Yushan, Abu-Rub, Haitham, Ben-Brahim, Lazhar, and Peng, Fang Zheng
- Subjects
CASCADED counters ,ELECTRIC inverters ,PHOTOVOLTAIC power systems ,ELECTRIC power production ,HARMONIC motion - Abstract
The quasi- $Z$ source (qZS) cascaded multilevel inverter (CMI) (qZS-CMI) presents attractive advantages in application to photovoltaic (PV) power system. Each PV panel connects to an H-bridge qZS inverter (qZSI) to form a power generation module. The distributed maximum power point tracking and all modules' dc-link peak voltage balance can be achieved. However, it is the same with the conventional CMI that the second-harmonic ( $2\omega$) voltage and current ripples exist in each qZSI module. It is crucial for a qZS-CMI to design the reasonable qZS network parameters to limit the ripples within a desired range. This paper proposes an analytic model to accurately calculate the $2\omega$ voltage and current ripples of each qZSI module. A qZS impedance design method based on the built model is proposed to limit the $2\omega$ ripples of dc-link voltage and inductor current. Simulated and experimental results through using the designed 1.5-kW prototype validate the proposed analytic model and the design method. Furthermore, this paper analyzes all of the operating states for a qZSI module and calculates the power loss. The measured efficiency from the prototype verifies the theoretical calculation, and the qZS-CMI-based grid-tie PV power system is tested in practical. [ABSTRACT FROM PUBLISHER]
- Published
- 2014
- Full Text
- View/download PDF
49. An Effective Sliding Mode Control Design for a Grid-Connected PUC7 Multilevel Inverter.
- Author
-
Makhamreh, Hamza, Trabelsi, Mohamed, Kukrer, Osman, and Abu-Rub, Haitham
- Subjects
SLIDING mode control ,ELECTRIC inverters ,COST functions ,PULSE width modulation transformers ,ONLINE algorithms ,SAMPLING errors - Abstract
This paper proposes an effective sliding mode controller (SMC) for a grid-connected 7-level packed U-cell (PUC7) inverter. The aim is to design a simple controller that deals effectively with the complex control problem of the PUC7 inverter (multiobjective control problem). The selection of the control actions is achieved according to the system state error at every sampling time, regardless of the previous values, which makes the control technique model-independent. The control algorithm evaluates online two cost functions (one for each state error), which are derived on the basis of sliding mode theory, and it selects the optimal control input in order to satisfy the reaching conditions of the two cost functions. Compared with the existing solutions, the proposed SMC technique ensures lower average switching frequency by tuning the hysteresis bandwidth of the capacitor-voltage error. The fast implementation, needless of gains tuning, and simple design procedure are the main features of the proposed algorithm. Simulation and experimental results are presented to prove the effectiveness of the proposed technique in controlling the PUC7 inverter with high dynamic performance and robustness against disturbances and parameters mismatch. [ABSTRACT FROM AUTHOR]
- Published
- 2020
- Full Text
- View/download PDF
50. Inverter Side RL Filter Precise Design for Motor Overvoltage Mitigation in SiC-Based Drives.
- Author
-
Ruffo, Riccardo, Guglielmi, Paolo, and Armando, Eric
- Subjects
OVERVOLTAGE ,ELECTRIC inverters ,ELECTRIC machinery ,POWER semiconductor switches ,FILTERS & filtration ,ELECTRIC machines ,VARIABLE speed drives - Abstract
This paper investigates the use of resistor–inductor (RL) filters for motor overvoltage issues caused by cables connecting inverters to electric machines. Using existing filter design formulae and fixing the desired peak motor voltage, an RL filter is designed for a 15-kW industrial drive. This filter is used with a Silicon IGBT inverter and a matching between the design targets and the experimental results are found. Using the same filter with an SiC MOSFET inverter, a detrimental effect in overvoltage mitigation task is found. From simulations, it is noticed that combination of filter resistor parasitic inductance and high $dv/dt$ causes unpredicted additional high-frequency motor overvoltages. These phenomena require higher filter inductance values with respect to the standard one, thus previous filter design formulae cannot be used. New design formulae, valid when inverters with high $dv/dt$ are used, are proposed and experimentally validated. Interestingly, using the proposed formulae, it is discovered that the best filter resistance is not equal to the characteristic impedance of the cable. A design guideline that permits to optimally design the RL filter without simulation tool, considering the resistor parasitic inductance and the inverter $dv/dt$ is finally proposed. [ABSTRACT FROM AUTHOR]
- Published
- 2020
- Full Text
- View/download PDF
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.