Search

In this paper, a single-inductor dual-output (SIDO) dc–dc converter is proposed. The significant feature of the proposed converter is feeding a constant power load in low-voltage side (LVS) port, where even feeding a variable load at LVS does not have any cross regulation to high-voltage side port with the desired approximation. Magnificently, both merits are obtained in open-loop manner, which is an outstanding characteristic in comparison with that of the existed converters. In this paper, soft commutation and soft switching of switches and diodes are investigated along with the aforementioned main novelty. Moreover, detailed theoretical analyses of the proposed SIDO dc–dc converter in continuous conduction mode are presented besides the comparisons with some other structures. Finally, theoretical analyses are verified through a 1500 W experimental prototype results. [ABSTRACT FROM AUTHOR]

This paper proposes two coupled-inductors-based Z-source networks, called the modified series and tapped switched-coupled-inductors quasi-Z-source networks (mSSCL-qZSN and mTSCL-qZSN, respectively). These networks offer high voltage gains with less-than-unity winding turn ratios $(n < {\text{1)}}$ , resulting in a reduced inductive element size. Other advantages include a less number of active components and their lower ratings and a higher efficiency. In addition, a lower magnetic core size is required for the proposed ZSNs due to the lower peak magnetizing current. The performance principles and detailed comparative analysis are provided and confirmed through experiments on a 200-W dc–dc converter. [ABSTRACT FROM AUTHOR]

Impedance networks have been already investigated in various literature with the main goals of increasing the attainable voltage gain and reducing the components number. Recently, coupled inductors found popularity because they let converters with lower weight and cost. It seems that coupled inductances are a proper answer to the increasing voltage gain while keeping down the components number. This paper proposes a novel impedance network circuit based on three coupled inductors with a Δ connection. The proposed Δ-source converter offers smaller magnetizing current and winding losses compared to the successful Y-source circuit. Moreover, with the Δ-connected three coupled inductors, the adverse effect of leakage inductance on the converter performance is significantly reduced. The effectiveness of the proposed structure is analytically proved. The theoretical achievements over the conventional Y-source structure are confirmed through extensive simulations and experiments. [ABSTRACT FROM PUBLISHER]

A simple current-feed single-switch forward resonant converter with secondary diode-clamping is proposed for low-power high-density bus converter applications in this paper. The quasi-zero-voltage-switching turn-on and quasi-zero-current-switching (ZCS) turn-off for switch are both achieved. Due to the quasi-ZCS turn-off , the high voltage spike in traditional single forward converter with a reset winding is much reduced. A small diode connected to the output capacitor is utilized to clamp the voltage stress of the switches. The operating principle of the proposed converter is analyzed and a MHz 66 W 24 V-to-12 V prototype with all Si devices is built up. Experimental results show good soft-switching features, and the prototype achieves 95.3% peak efficiency with 270 W/in3 power density. [ABSTRACT FROM PUBLISHER]