Search

In this paper, many impedance-source inverters with coupled inductors have been investigated to obtain a high step-up boost ratio. However, the leakage inductors in these topologies induce great voltage spikes at the dc link, which will increase the voltage stress of switches. Thus, the power level of inverters is limited. Furthermore, the efficiency of the inverters can be degraded by the losses associated with leakage inductors. To address abovementioned issues, this paper proposes a family of low-spike high-efficiency Y-source inverters. The proposed inverters have the ability of eliminating voltage spikes at the dc link and recycling the leakage energy via the additional diode and capacitor. In order to show the excellent characteristics of the proposed topologies, this paper compares the performances of the proposed inverters and the improved-Y-source inverter in many aspects. Simulation and experimental results have verified the abilities of the proposed inverters. [ABSTRACT FROM AUTHOR]

In this paper, a new family of impedance source inverters is presented. It employs high-frequency electrical isolation between the inverter bridge switches and the load along with voltage clamping across the dc-link voltage. Conventional Z-source inverters (ZSIs) employs an impedance network that consists of inductors and capacitors. It has unique features that realize both step-up/step-down functions and eliminates the need of dead/overlap times. This paper extends this novel concept by using electrical isolation in impedance source inverters. High-frequency isolation has many advantages in terms of immunity and reliability; when applied with impedance source inverters this makes ZSIs a preferable choice for industrial applications. In photo-voltaic systems, the addition of the high-frequency transformer provides safety by avoiding the injection of dc circulating current into the grid, without the need of an external bulky line frequency transformer. The gain of the proposed inverter design can be accurately selected by choosing the turns ratio of the high frequency transformer (HFT) or by adjusting the shoot-through duty cycle (STDC) to the inverter. This allows for greater freedom especially when utilizing a higher modulation index, with the STDC allowing dynamic gain adjusts to be done speedily during operation of the inverter. Additionally, a dc-rail voltage clamping technique for the proposed class of isolated ZSIs is also discussed. This technique provides benefits not only in improving the output voltage quality, but also in reducing voltage stress of the active and passive components by minimizing the voltage spikes across the switching devices. In this paper, several high-frequency isolated ZSIs are presented, and an example isolated improved ΓZSI design is shown and discussed in detail. Simulations are provided for the proposed class of isolated inverters to verify their working. Further experimental investigation has been done for which results for the isolated improved ΓZSI are reported. These empirical results have largely confirmed the expected benefits that were determined through simulation and accurate model-based testing. [ABSTRACT FROM AUTHOR]

In this paper, a series-capacitor-based interleaving buck power factor correction (PFC) converter is proposed, the intermediate energy storage capacitance of which is operated at discontinuous capacitor voltage mode (DCVM), and automatic power factor (PF) correction for this converter is obtained. Moreover, the voltage across the series capacitor of the proposed PFC converter is clamped at the input voltage, and thus peak voltage stress existed in the traditional DCVM buck PFC could be relieved. By effectively regulating the charge/discharge time for the series capacitor, ultrahigh step-down conversion ratio of the proposed converter is achieved, the conversion ratio of which is independent of the duty cycle and only related to the switching frequency and circuit parameters. Therefore, high PF can be obtained due to very narrow deadtime of the input current. Meanwhile, the proposed PFC converter can realize the soft turn-on of part power switch and soft turn-off of part power diodes. In addition, comparing with the traditional discontinuous inductor current mode PFC, the input current of the proposed PFC converter is continuous so that the peak value and root-mean-square value of input current can be reduced. The operational principle, performance analysis, and parameter design principle are given in this paper. The analysis results show that the PF and total harmonic distortion are also independent of the duty cycle. Finally, a 220-Vac input, 60 W/15 V output experimental prototype is built to verify the validity of the theoretical analysis. [ABSTRACT FROM AUTHOR]

This paper proposes an “isolated soft switching current fed LCC-T resonant dc–dc converter for PV/fuel cell applications.” This converter is able to achieve zero voltage switching for front-end inverter switches and zero-current switching for voltage doubler diodes. The majority of dc–dc converters have compact capacitive (C) filter in output, but high harmonic currents through transformer makes them bulky. The proposed converter attempts to improve harmonic content through a transformer under wide load and input variations as well as it can significantly reduce required turns ratio of transformer to achieve required output voltage. For the above reasons, the proposed converter can offer better footprints and therefore it can be a potential candidate for PV/fuel cell applications. This paper presents basic operating principal, detailed analysis, control, and design of the proposed converter with the help of an example. This converter operates in two modes, i.e., constant duty cycle mode and constant frequency mode, depending on load demand, and is explained through operating curves. Finally, experimental results are included for justifying the proposed theory. [ABSTRACT FROM AUTHOR]

The extra-LC auxiliary-resonant-snubber-based converter (ELCARSC), as a soft-switching converter, has the advantages of low switching loss, low electromagnetic interference noise, and low-output distortion caused by the dead-time effect. However, the dead-time effect is still the main problem in a high-precision application. Besides, the traditional control and compensation methods rely on the accuracy of the circuit parameters, especially the junction capacitance, thus resulting in compensation error. Therefore, this paper proposed a novel high-precision control method through modulating the initial resonant current to eliminate the dead-time effect of ELCARSC. The method does not need complicated online calculation and reduces the dependence on the accuracy of the circuit parameters, especially the influence of the junction capacitances of the switches. In this paper, the dead-time effect of the ELCARSC is analyzed. The output voltage error with the conventional variable-timing control method is analyzed. Subsequently, the proposed modulated initial resonant current control is introduced. Finally, a prototype was developed that verified the effectiveness of the control method. The quality of the output current and voltage is improved by utilizing the proposed control method. However, the peak current of the auxiliary switch is increased. [ABSTRACT FROM AUTHOR]

Tap changers are commonly used to maintain the limits in medium-voltage lines. Initially based on electromechanical switches, efforts have been made since the 1990's to reduce maintenance expenses with thyristor-based versions. Among the methods to limit the short-circuiting current in commutating taps, the multiwinding coil has demonstrated, during decades of use in the low-voltage field, to be reliable and cheap. Two previous papers showed that multiwinding changers can be applied to medium-voltage lines up to 34.5 kV, 15 MVA with no parallel or series thyristor association. This paper proposes a new topology, based on a double array of tap switches per phase, allowing for step-up the power from 15 to 36 MVA and insertion in any point of the line with no connection to the head transformer. A comparative cost analysis gives technical and economical results for a typical 10 MVA, 34.5 kV stabilizer demonstrating the advantages of the proposed circuit over the electronic single array topology and the classic mechanical solutions. [ABSTRACT FROM PUBLISHER]

In this paper, two structures are proposed for the switched-inductor quasi-Z-source inverter. In the proposed structures to extend the voltage gain of inverter, two new switched-inductor structures are used. In the proposed structures, voltage across the capacitors in the Z-source network and in the switched-inductor is symmetric and small. The other advantage of proposed inverters is known as achieving higher voltage gain per smaller duty cycle ratio (of shoot-through). Compared with a conventional continuous input current switched-inductor quasi-Z-source inverter at the same gain voltage, there is less of a ripple of input current in the proposed inverters. In this paper, at first the both the conventional and the proposed switched-inductor Z-source inventers are thoroughly investigated to find out their governing relations. Then, the proposed Z-source inverters are compared with the conventional ones by simulating them to assess their performance efficiency. Next, applying the simple boost pulse width modulation the simulation is carried out with PSCAD/EMTDC software. After that, to evaluate the obtained results, the prototypes of the proposed inverters with 48 Vdc input voltage are used. [ABSTRACT FROM PUBLISHER]

Microinverters require high voltage gain capability for interfacing the low dc voltage output of photovoltaic (PV) module to single-phase ac grid. A two-stage nonisolated inverter is proposed in this paper, with a first boost stage and a second traditional pulse width modulated grid-tied inverter stage. The proposed boost stage consists of a coupled inductor added with a voltage multiplier to achieve the required high voltage gain at high efficiency and to operate over a wide input voltage range. Among the coupled inductor topologies, adding a clamp circuit is a common solution to limit the voltage spike caused by leakage inductance. In the proposed converter, the resonance between the coupled inductor and voltage multiplier is used to address the issue of voltage spike, thereby reducing both component count and device voltage stress. Detailed analysis and design procedure of the proposed converter is presented in this paper. Experimental results of a 250-W microinverter are presented to validate the proposed converter. [ABSTRACT FROM PUBLISHER]

In this paper, new half-bridge and full-bridge topologies for a switched-boost inverter are proposed. These topologies have a high boost factor in comparison with conventional types. In addition, the proposed topologies have continuous input current and can generate zero-voltage level in output. In this paper, the operation of the proposed inverters in different operating modes is analyzed. Then, the values of inductors and capacitors are designed. Moreover, the used switching pattern and its logical diagram are introduced. A comprehensive comparison between the proposed and conventional topologies in terms of the boost factor, the number of elements, and the efficiency shows the good features of the proposed inverters. Finally, to verify correct operation of the proposed topologies and derived equations, simulation and experimental results are presented. [ABSTRACT FROM AUTHOR]

This paper proposes a wide-range zero-voltage-switching (ZVS) active-clamped current-fed push–pull converter for fuel cell application. The presented converter achieves ZVS for all of the primary switches and ZCS for secondary diodes from rated load to 10% full load over the wide input voltage variation, improving the overall efficiency. The ZVS of switches is realized by the energy stored in the transformer leakage inductance aided by the secondary parallel inductor. An additional active clamping circuit suppresses the voltage spike as well as assists in realizing ZVS of switches. Low-voltage-rated switches with low on-state resistance can be used. Moreover, the voltage-doubler rectifier is adopted to release the reverse-recovery problem of rectifier diodes and reduce turns ratio of the high-frequency transformer. Detailed steady-state operation, analysis, design, control, comparative study, and experimental results are discussed in depth in this paper. Finally, a 200-W prototype has been built in the laboratory to verify the effectiveness of the proposed converter. [ABSTRACT FROM PUBLISHER]

In this paper, two topologies are presented for the enhanced-boost quasi-Z-source inverters (qZSI), namely continuous input current configuration and discontinuous input current configuration of enhanced-boost qZSI with two-switched impedance networks. Similar to enhanced-boost impedance-source inverters (ZSIs), these proposed inverter topologies possess very high boost voltage inversion at low shoot-through duty ratio and high modulation index to provide an improved quality output voltage. Compared to enhanced-boost ZSIs with two-switched Z-source impedance networks, these proposed inverter topologies share common ground with source and bridge inverter, overcome the starting inrush problem, and draw continuous input current and the lower voltage across the capacitors. Moreover, the input ripple current is negligible. This paper presents the operating principles and analysis of continuous input current configuration enhanced-boost qZSI with two-switched impedance networks and compares with ZSI, switched inductor ZSI, DA/CA-qZSI, and enhanced-boost ZSIs. The theoretical analysis is done and is validated through simulation and experimental results. [ABSTRACT FROM PUBLISHER]

In this paper, a voltage sensorless controller is developed for a two-switch single-phase rectifier that involves power factor correction and active pulsating power buffering without electrolytic capacitors. While a two-switch rectifier normally requires four sensed signals for control, only one current sensor is required in this proposal, thereby offering advantages such as low cost, high compactness, isolation between control and power circuits, and improved reliability. While the basic operating principle follows that of a conventional voltage sensorless controller for single-switch converters, several critical design considerations are the key to the success of the implementation which is explained in detail. The feasibilities of the controller are experimentally testified with a 100-W rectifier prototype regarding both steady state and dynamic performance. [ABSTRACT FROM AUTHOR]

For photovoltaic applications, the flyback microinverter with pseudo-dc-link is popular as a simple topology but brings large transformer turns ratio and thus large leakage inductance, which would deteriorate the converter efficiency. To solve this issue, based on the nonisolated pseudo-dc-link structure, this paper proposed a hybrid boost–flyback/flyback (BF/F) microinverter. This new topology is operated at the BF mode for the most segment of a half grid cycle and the F mode for the rest. During the BF mode, high voltage gain with low voltage stress is easily available in minimized transformer turns ratio. Besides, the leakage energy is recycled and the turn-off voltage spike of the main switch is clamped, as a result of a passive snubber inherently contained in this mode. Given that the BF mode is lack of step-down function, the F mode is developed to regulate the output voltage even for values lower than the input voltage. The operation and characteristic of the hybrid BF/F microinverter in boundary conduction mode are analyzed in detail, and the mathematical expression of reference current is derived theoretically to guarantee high power quality. Finally, a 240 W prototype was implemented to validate the theoretical analysis and the benefits of the proposed topology. [ABSTRACT FROM AUTHOR]

This paper proposes a novel isolated high step-down conversion circuit, called an integrated buck and modified push−pull (IBMPP) converter, which is able to lower the voltage level on the primary side of the ideal transformer, resulting in a lower turns-ratio and decreased leakage inductance. The IBMPP converter is able to prevent the duty cycle from operating in extremely low conditions. Furthermore, the proposed converter adopts active-clamp techniques to recycle leakage energy and to suppress voltage spikes, so that the conversion efficiency can be effectively improved. The advantages of the IBMPP converter are its simple topology, easy control mechanism (which requires only two signals with a 180-degree phase shift), high conversion ratio, low component counts for power switches, and less voltage stress on some of the switches on the high-voltage side. The operation principle, steady-state analysis, design considerations, and experimental results of the proposed IBMPP converter are presented in detail. The feasibility of the IBMPP is verified by hardware implementation. The full-load efficiency at 250 W is 81.44%, and the input and output voltages are 380 and 5 V, respectively. [ABSTRACT FROM AUTHOR]

Cascaded multicell converter (CMC) is one of the effective solutions for medium-voltage high-power drives. The inability to regenerate power back to the source is one of the limitations of this converter. The regeneration capability is obtained by using a pulsewidth-modulated active rectifier instead of a conventional three-phase passive rectifier in each cell. However, due to their two-level voltage operation at the input side, an inductor is required for each cell to filter out the switching frequency components from the input current. This paper proposes a new configuration of regenerative CMC based on coupled inductor to achieve multilevel voltage at the transformer secondary terminals. This allows us to operate the rectifier devices at reduced switching frequency. The coupled inductor reduces the total harmonic distortion (THD) of the transformer secondary current and thus the transformer size. The size of the filter inductor and the transformer ratings are compared. The operating principle and the detailed analysis are presented. A technique to bypass a faulty module is proposed. The working of the converter is verified through simulation and experimental studies. [ABSTRACT FROM AUTHOR]

In this paper, a new high voltage gain step-up dc–dc converter is proposed for interfacing renewable power generation. The configuration optimally integrates both the coupled-inductor and switched-capacitor techniques to achieve an ultra-high step-up gain of voltage conversion with low voltage stress and high efficiency. It consists of a voltage boost unit, a passive clamp circuit, and a symmetrical voltage multiplier network. The structure becomes modular and extendable without adding any extra winding for ultra-high step-up voltage gain. The proposed topology not only reduces the voltage stress on the main switch but also maintains it steady for the entire duty cycle range. Furthermore, the reverse recovery issue of the diodes is alleviated through the leakage inductance of the coupled inductor. The operation principle and steady-state analysis are presented in detail. Experimental evaluation validates the claimed advantages and demonstrates a well-distributed efficiency curve and the peak of 96.70%. [ABSTRACT FROM AUTHOR]

In this paper, a new step-up dc–dc converter module that consists of three resonant submodules interconnecting with 1:1 turns ratio three-phase transformer and coupled current-fed voltage doubler modules is presented for medium voltage dc converter design in wind energy application. By utilizing step-up resonant circuits with three-phase transformer and combining it with a “multistring” inverter, the proposed circuit structure completely utilizes all the switching circuits to transfer power to the output. In addition, the proposed topology is able to achieve high voltage gain without using large turns ratio high frequency step-up transformers. Zero voltage switching turn-on and near zero current switching (ZCS) turn-off are maintained for all the switches. A modular 1.5 MW, 1 kV (dc-link), 20 kV (output) converter system is presented to validate the performance of the proposed circuit. Experimental results on a laboratory-scale 2.8 kW, 0.3 kV (dc-link), 6 kV (output), prototype are provided to highlight the merits of this work. Silicon Carbide (SiC) MOSFETs and SiC Schottky diodes are utilized in both designs. Results confirm that a peak efficiency of 97.6% is achieved in the prototype. [ABSTRACT FROM AUTHOR]

A dual-active-bridge (DAB) converter with parallel-connected full bridges in low-voltage side is proposed in this paper. A coupling inductor is integrated into the two low-voltage-side full bridges for zero-voltage-switching (ZVS) operation throughout full-load range. By analyzing the working modes of the converter, the ZVS range of the converter is derived. To compromise the ZVS and the conduction loss caused by the coupling inductor, the modulation trajectory is designed in terms of the boundary conditions of the ZVS range. The conduction loss of the proposed converter is compared with the conventional parallel-connected DAB converter, which illustrates that the conduction loss of the proposed converter is only increased under light loads. Finally, a 1.2-kW experimental prototype is built to verify the proposed converter and the modulation scheme, which demonstrates the remarkable ZVS performance and efficiency improvement. [ABSTRACT FROM AUTHOR]

The efficiency of bidirectional inductive power transfer (BIPT) systems is strongly dependent on the load. Besides, the soft-switching operation of power switches is critical to high-frequency converter in the BIPT systems. In this paper, a triple-phase-shift (TPS) control strategy is proposed to achieve load matching while realizing zero voltage switching (ZVS) for all power switches within the entire power range. The load matching condition of the BIPT system with double-sided LCC compensation network is analyzed. And a dual side phase shift control is proposed to adjust power flow while realizing load matching. To realize ZVS operation, the third phase shift between primary and secondary side is introduced as an extra control variable. A time domain model of double-sided LCC compensation network is established to analyze the ZVS range. With the proposed TPS control, wide ZVS operation range of the system can be achieved while maintaining load matching. At last, a scale down prototype of 1 kW BIPT system is developed. The experimental results show good agreement with theoretical analysis, all switches realize ZVS within the entire power range and a peak efficiency of 94.83% is achieved. [ABSTRACT FROM AUTHOR]

This paper proposes two coupled-inductors-based Z-source networks, called the modified series and tapped switched-coupled-inductors quasi-Z-source networks (mSSCL-qZSN and mTSCL-qZSN, respectively). These networks offer high voltage gains with less-than-unity winding turn ratios $(n < {\text{1)}}$ , resulting in a reduced inductive element size. Other advantages include a less number of active components and their lower ratings and a higher efficiency. In addition, a lower magnetic core size is required for the proposed ZSNs due to the lower peak magnetizing current. The performance principles and detailed comparative analysis are provided and confirmed through experiments on a 200-W dc–dc converter. [ABSTRACT FROM AUTHOR]

A quasi-Z-source modular cascaded converter (qZS-MCC) is proposed for dc integration of high-power photovoltaic (PV) systems. The qZS-MCC comprises series-connected front-end isolated qZS half-bridge (HB) dc–dc converter submodules (SMs). With the front-end isolation, the qZS-MCC achieves high-voltage dc capability, while maintaining modularity and PV panel grounded. The post-stage qZS-HB handles the PV voltage and power flows, dc-link voltage balance, and output-series power integration. Whereas, the front-end isolation converters of all SMs perform a constant duty cycle, lowing the control complexity. There is no double-line-frequency power flowing through the dc-side PV panels, qZS inductors, and qZS capacitors in the qZS-MCC, so small qZS impedance is possible compared to the existing qZS cascaded multilevel inverter. The configuration, operating principle, power loss evaluation, and passive components design of the proposed system are investigated in this part of the paper. The system control, modeling, and corresponding verifications are stated in Part II of this paper. [ABSTRACT FROM PUBLISHER]

In this paper, a nonisolated bidirectional dc–dc converter is presented. The proposed converter consists of two boost converters to enhance the voltage gain. Four power switches with their body diodes are employed in the proposed converter. Also, two inductors and a capacitor are used as passive components. The input current is divided to the inductors which causes the efficiency to be high. The voltage gain of the proposed converter is higher than the conventional cascaded bidirectional buck/boost converter (CCBC) in step-up mode. Besides, the voltage gain in step-down mode is lower than CCBC. Besides, the efficiency of the proposed converter more than CCBC while the total stress on active switches are same. The simple structure of the proposed converter causes its control to be easy. The steady-state analysis of the proposed converter is discussed in this paper thoroughly. The stress on converters’ devices and the efficiency of the proposed converter and CCBC are compared in this paper. Finally, the proposed converter prototype circuit is implemented to justify the validity of the analysis. [ABSTRACT FROM PUBLISHER]

A nonisolated ultra-high step-down interleaved dc–dc converter with low voltage stress and common ground between the input and output ports is proposed in this paper. In order to extend the extremely narrow duty cycle, series capacitors and transformers are applied to the four-phase interleaved buck converter. In addition to extending the duty cycle, the series capacitors clamp the voltage stress across the switches and diodes, which results in using low voltage rating semiconductor components. Additionally, the main switches are turned on under a soft-switching condition. Hence, the conduction and switching losses are reduced and the overall efficiency of the designed converter is improved. Other important strengths of this topology are very low output current ripple due to interleaving and automatic uniform current sharing. The validity of theoretical analysis and converter operation is confirmed by the implementation of a 150 W prototype at 400 V input voltage and 12 V output voltage. [ABSTRACT FROM AUTHOR]

In this paper, a modified asymmetric half-bridge (AHB) isolated converter is proposed, which does not have dc current offset in the transformer. The topology operates in the same way as the conventional half-bridge (HB), using asymmetric pulsewidth modulation with constant frequency. A voltage doubler rectifier is used in the output stage, which avoids the flow of the dc component current in the primary side of the transformer. In order to investigate the application of the proposed topology, a parallel-resonant (PR) version of the modified AHB was tested, which uses the parasitic elements of the transformer, such as the leakage inductance and the winding capacitance, to achieve zero voltage switching in the primary side switches over a wide load range. Theoretical and commutation analysis results are reported and design guidelines are presented herein. Experimental data were obtained from a parallel resonant 1-kW prototype, operating with a 50 kHz switching frequency, 400 V input voltage, and 400 V output voltage, to verify the theoretical study, and 97% efficiency was achieved. The proposed solution was also tested at high voltage, operating with a rated power of 1.8 kW, switching frequency of 50 kHz, input voltage of 400 V and series-connected output voltages, the maximum voltage being 8620 V. [ABSTRACT FROM AUTHOR]

In this paper, a new multi-input multi-output (MIMO) dc–dc converter with high step-up capability is proposed for wide power ranges. Also, in order to increase each output voltage, diode–capacitor voltage multiplier (VM) stages are utilized in the proposed converter. The number of input stages, output stages, and VM stages are arbitrary and dependent on design conditions. At first, the general structure of proposed MIMO converter is presented. Then, in order to explain the converter operation, we walk through the design of a 1-kW four-input two-output example, including loss and efficiency calculations. We validate the design with a prototype that matches efficiency calculations. [ABSTRACT FROM AUTHOR]

In this paper, an input-series flyback converter with the coupled-inductor-based passive snubber is proposed, where the input-series converter is based on transformer integration, and the passive snubber is composed of inductors, capacitors, and diodes. The inductors of the snubber in various series modules are made on a common magnetic core, and the coupled-inductor scheme is adopted. With the help of the coupled inductor, active input voltage sharing of the input-series converter can also be achieved after the switches are turned off, and voltage sharing of the switch in each series module can be ensured, which overcome the shortcomings of the existing input-series flyback converter. Active voltage sharing processes caused by the coupled inductor are analyzed in detail. Furthermore, the design guideline of the passive snubber is discussed. Finally, the experimental study has been done on a 1500 Vdc/60 W laboratory-made prototype composed of three flyback series modules, and the feasibility of the proposed method and the theoretical analysis is verified by the experimental results. [ABSTRACT FROM AUTHOR]

In this paper, an expandable single-input three-output high step-up dc–dc boost converter is proposed. The voltage conversion ratio of the output ports of the converter can be increased by inductor-diode-capacitor and diode-capacitor cells. The proposed converter can be applied in renewable energy conversion systems, such as in photovoltaic and fuel cells. Also, due to the three output ports of the converter, it can be utilized in portable devices which require high voltage conversions. The main advantage of the proposed converter is supplying loads with different voltages and current ranges due to the expandable structure of the converter. Besides, the proposed converter has the merit of achieving high voltage gains at high frequencies without preselecting wide duty cycles. Furthermore, the proposed converter is able to achieve higher voltage ranges without having any transformer or coupled inductors in its structure; consequently, the related drawbacks are avoided. The switching pattern of the converter is simple and both switches are on and off simultaneously. In this study, a single switching period of the proposed converter, the voltage conversion ratios of the output ports and the expanded form of the structure are analyzed theoretically. Finally, to verify the theoretical results, the experimental results for 40-V input/200-V, 100-V and 360-V outputs with total 600-W output power are extracted and compared with each other. [ABSTRACT FROM AUTHOR]

A novel bidirectional dc–dc converter having high voltage gain capability with high efficiency is proposed in this paper for interfacing storage in a range of applications. The proposed converter steps up (boost) the voltage in one direction while stepping it down (buck) in the other direction of operation. An attractive feature of the proposed converter is the symmetry of its operating modes. It also has inherent soft-switching capability during turn on of the switches, enabling high switching frequency operation. This, coupled with the fact that the proposed converter uses only one coupled inductor for both boost and buck modes, leads to a compact system. A clamped capacitor network is used to recover the leakage energy. Circuit description, design, and loss calculations for both buck and boost modes are explained. The bidirectional converter is designed for a voltage gain of 10 and (1/10) in the boost and buck modes, respectively. A 500 W laboratory prototype of the proposed converter has been developed and tested under rated conditions. Even for a large voltage gain of 10, a peak efficiency in excess of 94% is achieved, which is not possible with conventional converters. All the results of this work are included. [ABSTRACT FROM AUTHOR]

In recent years, modular multilevel converter (MMC) is considered for medium-voltage variable speed drives (VSD) due to its modularity and higher reliability. However, the major drawback of the MMC-based VSD is the higher capacitor ripple voltage at lower operating speeds. In literature, this ripple voltage is reduced by injecting a high-frequency circulating current into each arm. This additional circulating current increases the overall current rating of the devices, inductors, and capacitors. Alternatively, the capacitor ripple voltage can be reduced at the lower output frequency by reducing the dc-bus voltage. This paper proposes a new configuration using a multipulse diode-bridge rectifier to reduce the dc-bus voltage when the drive is operated at lower speeds. Therefore, the capacitor ripple voltage decreases without injecting any circulating current. In addition, a new technique is proposed to maintain the peak-to-peak value of the submodule capacitor ripple voltage constant at near-zero speed. The proposed converter with 24-pulse rectifier configuration is simulated in MATLAB/Simulink, and the experimental validation is carried out on a prototype with 12-pulse rectifier. [ABSTRACT FROM AUTHOR]

A single-stage ac–dc converter with high power factor (PF) usually suffers from a significant output voltage ripple at double line frequency. In order to suppress such low-frequency output voltage ripple and maintain high PF, a series compensation circuit (SCC), which generates the same magnitude but 180° phase shifted low-frequency voltage ripple, is connected in series with the output of a power factor correction (PFC) converter. In this paper, an output impedance model of the SCC is established and the relationship between the output impedance of the SCC and the low-frequency output voltage ripple of an ac–dc converter is analyzed. Based on the proposed output impedance model, a low-frequency output voltage ripple can be evaluated. To further reduce the low-frequency output voltage ripple, an output impedance shaping method with a virtual impedance is presented. The implementation of the virtual impedance of the SCC with average current mode control is studied. A flyback PFC converter with a buck SCC is implemented for the study of the suppression of the low-frequency output voltage ripple. A prototype is designed to verify the analysis results. [ABSTRACT FROM AUTHOR]

Three-phase bridge converter is popular in ac–dc power conversion. The conventional sensor control with inner current loop and outer voltage loop is often used to control the three-phase bridge converter. Many three-phase sensorless control methods had been proposed to control the bridge converter with considering the inductance and inductor resistance. In this paper, the voltage drop of the power semiconductor is first considered in the proposed three-phase current sensorless control method. At first, the dynamic behaviors of three-phase bridge converter for power factor correction (PFC) applications are studied, and its equivalent three-switch model is developed. Based on this developed model, three-phase current sensorless control with only voltage controller is proposed. Additionally, the voltage-loop transfer function of PFC bridge converter controlled by the proposed method is modeled, and the result is helpful to obtain the controller parameter. The proposed control method is implemented on the DSP-based platform for evaluation. Finally, the provided simulation and experimental results demonstrate the performance of the proposed method. [ABSTRACT FROM AUTHOR]

In this paper, a new nonisolated high step-up dc–dc converter is proposed. Active–passive inductor cells (APICs) are used to extend the topology. The ability to achieve high gains is the main merit of the proposed topology. The proposed converter operates based on parallel charging and series discharging of the inductors. The converter also achieves high step-up voltage gain with appropriate duty cycle and low voltage and current stress on the power switches and diodes. The proposed converter is analyzed in operation modes. The main parameters of the converter such as voltage gain, voltage stress of semiconductor devices are calculated to compare with other structures. Considering the output voltage ripple and filter size, the proposed converter is designed. Moreover, the losses and efficiency of the converter are calculated. The performance of the proposed converter is validated by experimental results. [ABSTRACT FROM AUTHOR]

Voltage balance control of dc capacitors is the key problem of multilevel diode-clamped converters (DCCs). In this paper, a novel hybrid voltage balance method is proposed for five-level DCCs. First, to balance the upper or lower two capacitors, a novel flying-capacitor-based voltage balance circuit (VBC) is proposed, and the time-domain average model of the VBC is established. Then a state-machine-based control strategy is developed to balance capacitor voltages as well as to limit overcurrent of inductors in a transition process. To keep the midpoint voltage stable, a zero-sequence injection method is proposed, which inherently ensures the improved modulation signals locate within the linear modulation ranges. With the flying capacitor transferring energy between dc capacitors, the device voltage stresses of the VBC are equalized, and the steady-state current ripples of the inductors are much smaller than those of the conventional chopper-based VBCs, which can reduce the volume and weight of the inductor. Simulation and experimental results for both inverter and rectifier operations prove that the proposed hybrid voltage balance method can balance dc capacitors of five-level DCCs in both steady states and transition states, and the inductor currents of VBCs can also be restricted within safe ranges. [ABSTRACT FROM PUBLISHER]

This paper studies different circulating current references for the modular multilevel converter. The circulating current references are obtained from the instantaneous values of the output current and modulation signal of the phase leg. Therefore, the determination of the amplitude and phase of the output current is not needed, which is a significant improvement compared to other methods such as those based on injecting specific harmonics in the circulating currents. Among the different methods studied in this paper, a new method is introduced, which is able to reduce the capacitor voltage ripples compared to the other methods. A closed-loop control is also proposed which is able to track the circulating current references. With the discussed methods, the average values of the capacitor voltages are maintained at their reference while the voltage ripples are kept low. Experimental results are presented to demonstrate the effectiveness of the proposed and discussed methods. [ABSTRACT FROM PUBLISHER]

In this paper, a novel transformerless interleaved high step-down conversion ratio dc–dc converter with low switch voltage stress is proposed. In the proposed converter, two input capacitors are series-charged by the input voltage and parallel-discharged by a new two-phase interleaved buck converter for providing a much higher step-down conversion ratio without adopting an extreme short duty cycle. Based on the capacitive voltage division, the main objectives of the new voltage-divider circuit in the converter are for both storing energy in the blocking capacitors for increasing the step-down conversion ratio and reducing voltage stresses of active switches. As a result, the proposed converter topology possesses the low switch voltage stress characteristic. This will allow one to choose lower voltage rating MOSFETs to reduce both switching and conduction losses, and the overall efficiency is consequently improved. Moreover, due to the charge balance of the blocking capacitor, the converter features automatic uniform current sharing characteristic of the interleaved phases without adding extra circuitry or complex control methods. The operation principles and relevant analysis of the proposed converter are presented in this paper. Finally, a 400-V input voltage, 25-V output voltage, and 400-W output power prototype circuit is implemented in the laboratory to verify the performance. [ABSTRACT FROM PUBLISHER]

Electric bicycles (EBs) are becoming increasingly popular in some regions such as China and Europe. However, wireless power transfer (WPT) for charging massive EBs poses a challenge related to the cost of WPT system (WPTS), especially in China, where EBs application is so sensitive to the product price. This paper presents an optimization method of the passive components for the S-LCC topology to decrease the cost of the overall system. With the novel method, the number of passive components can be optimized to the minimum and still with constant current and constant voltage outputs. A novel compensation method with an inductor array is also proposed to guarantee an inductive input impedance of WPTS, achieving soft switching and reducing the high switching losses of the high-frequency inverter (HFI). To demonstrate the validity of the proposed methods, an experimental setup is built. The performance of two WPTS indicates that massive EBs can be charged with only one HFI, and the cost of the overall system decreases accordingly. [ABSTRACT FROM PUBLISHER]

In this paper, the design and development of a novel interleaved tri-state boost converter (ITBC), which produces lower ripple and exhibits better dynamic response, is discussed. Boost converters are frequently connected in parallel and operate in an interleaving mode for the reduction of ripple content in source current and in output voltage. In this way, interleaved boost converter (IBC) is conceived, which improves the power handling capabilities and increases the overall system rating. It also has the advantage of reduction of the ripple content in source current and output voltage, but when control-to-output transfer function of IBC is derived under continuous conduction mode of operation, then a right-half-plane (RHP) zero appears in the transfer function. Due to the presence of RHP zero, IBC has nonminimum phase problem, which deteriorates the dynamic performance. The tri-state boost converter (TBC) is the best choice for RHP zero elimination, but due to the extra freewheeling mode, ripple content will also be increased. The proposed converter is a parallel combination of two TBC and operates in an interleaving mode. Therefore, the proposed converter has both of the advantages of TBC and IBC. The performance analyses of ITBC, TBC, and IBC have been studied based on simulation and experimental results. From the comparative analysis, it is observed that ITBC is performed better than other two converters. The ripple comparisons between three converters have also been done. It is found that the ripple content in ITBC is slightly greater than IBC but is less than TBC. [ABSTRACT FROM PUBLISHER]

Peak current mode (PCM) control has been widely used for the control of switching dc–dc converters due to its excellent transient performance. With the development of single-inductor dual-output (SIDO) dc–dc converters, PCM control technique is introduced to the control of SIDO dc–dc converters. Conventional PCM buck converter has only one reference current, with two inductor current borderlines are used to divide the operation modes of inductor current. However, PCM SIDO buck converter has more inductor current borderlines as it has one more reference current than that of PCM buck converter. In this paper, inductor current borderlines of PCM SIDO buck converter are investigated, and unified discrete iterative model of PCM SIDO buck converter is established. The effect of the difference of reference currents, initial inductor current and input voltage on the stability of PCM SIDO buck converter has been discussed by using bifurcation diagrams. The study results show that the stability of PCM SIDO buck converter is sensitive to the difference of reference currents, initial inductor current and input voltage. The stability boundary of the difference of reference currents, stability region of initial inductor current, and stability boundary of input voltage are derived. Lyapunov exponent and experimental results are carried out to verify the theoretical analysis results. [ABSTRACT FROM PUBLISHER]

Due to the relatively low output voltage of photovoltaic (PV) source, a high step-up converter with high efficiency is needed when the PV source is connected to the power grid. A novel high step-up converter based on two switched capacitors and a coupled inductor is proposed in this paper. The operating principle is analyzed and the voltage gain is derived. A 100-W prototype is fabricated in the laboratory to verify the theoretical analysis, and the highest efficiency is 96.4%. [ABSTRACT FROM PUBLISHER]

This paper extends the trans-Z-source concept to ac–ac power conversion and proposes a novel single-phase trans-Z-source ac–ac converter. The proposed converter retains the advantages of its existing Z-source/quasi-Z-source counterparts in which the output voltage can be boosted and in-phase with the input voltage or bucked/boosted and out-of-phase with the input voltage. Meanwhile, a coupled inductor is introduced into the proposed converter, and the turns ratio of the coupled inductor become another control variable beside the duty cycle to obtain extreme voltage gain. Importantly, the input voltage and output voltage share the same ground, and the input current could be continuous, which is a benefit for reducing input current harmonics. Most important of all, the safe-commutation strategy for the proposed converter is deep developed, and analytic expression between the switches state and loop circuit voltage/current condition is derived out. Hence, the current/voltage ripple can be avoided without a loss snubber circuit, which benefits a reduced cost and enhanced reliability. The performance analysis is discussed in consideration of parasitic resistance, and system parameter design is optimized based on theoretic calculation. A laboratory prototype is fabricated, and experiments are performed to verify the validation of the proposed converter. [ABSTRACT FROM PUBLISHER]

A common ground switched-quasi-Z-source bidirectional dc–dc converter is proposed for electric vehicles with hybrid energy sources. The proposed converter is based on the traditional two-level quasi- Z-source bidirectional dc–dc converter, changing the position of the main power switch. It has the advantages of a wide-voltage-gain range, a lower voltage stress across the power switches, and an absolute common ground. The operating principle, the voltage and current stresses on the power switches, the comparisons with the other converters, the small signal analysis, and the controller design are presented in this paper. Finally, a 300 W prototype with $U_{{\rm{high}}}= {240 \ \rm{V}}$ and $U_{{\rm{low}}}= {40\sim 120\ \rm{V}}$ is developed, and the experimental results validate the performance and the feasibility of the proposed converter. [ABSTRACT FROM PUBLISHER]

In this paper, dual-buck structured single-stage buck–boost inverters that use power MOSFETs to achieve high efficiency are presented. The proposed inverters require fewer switches, and half of the switches have reduced current stresses. They have no shoot-through problem; therefore, high system reliability can be obtained. The dead-time in PWM signals can be minimized or eliminated, which improving the quality of the output ac voltages and increasing the efficiency. In the proposed inverters, MOSFETs can be used without reverse-recovery issues of their body diodes to boost the efficiency and increase the switching frequency. To further improve the efficiency and stability of the proposed single-phase inverter, PWM strategies combining high- and low-frequency modulation are presented. A hardware prototype of the single-phase inverter was built and tested using resistive, inductive, and nonlinear loads. Experimental results for a 300-W prototype inverter show a 97.4% peak efficiency with a 25 kHz switching frequency. [ABSTRACT FROM AUTHOR]

The parallel three-phase grid-connected converters sharing dc and ac bus can increase the system power level effectively. However, the zero sequence circulating current (ZSCC) will occur inevitably under space vector pulse width modulation or discontinuous pulse width modulation (DPWM). In this paper, the mechanism and the mathematical model of ZSCC are studied. Then, a hybrid PWM (HPWM) strategy is proposed to suppress the ZSCC based on the same zero sequence voltage injected, which is dependent on the common grid information. The dc voltage utilization of HPWM can be extended compared with sinusoidal PWM (SPWM). The number of parallel modules can be infinity theoretically by using HPWM. It is noted that there is no internal commutation among modules (expect the dq current reference). Finally, the feasibility and the effectiveness of the proposed method are verified by experiments. [ABSTRACT FROM AUTHOR]

The battery energy-stored quasi-Z-source (BES-qZS)-based photovoltaic (PV) power generation system combines advantages of the qZS inverter and the battery energy storage system. However, the second-harmonic ( \text2\omega ) power ripple degrades the system's performance and affects the system's design. An accurate model to analyze the \text2\omega ripple is very important. The existing models did not consider the battery, or assumed a symmetric qZS network with $L_{{1}}= L_{{2}}$ and $C_{{1}}= C_{{2}}$, which limits the design freedom and causes oversized impedance parameters. This paper proposes a comprehensive model for the single-phase BES-qZS-PV inverter system, where the battery is considered and there is no restriction of $L_{{1}}= L_{{2}}$ and $C_{{1}}= C_{{2}}$ . Based on the built model, a BES-qZS impedance design method is proposed to mitigate the \text2\omega ripple with asymmetric qZS network. Simulation and experimental results verify the proposed \text2\omega ripple model and impedance design method. [ABSTRACT FROM AUTHOR]

This paper highlights the limitations of the dynamic response of a grid-tied inverter connected through an inductor $L$ when it is controlled using a proportional+resonant controller. Then, a new resonant current controller structure is proposed. This structure can be used to control the current injected by a grid-tied inverter through an $L$ filter. When compared to the classic design, the proposed controller has better transient response, both to current reference and grid voltage changes. This is verified through simulation and experimental results. [ABSTRACT FROM AUTHOR]

This paper proposes an isolated single-ended primary-inductor converter (SEPIC) dc–dc converter with ripple-free input current and lossless snubber. The proposed converter is based on a conventional isolated SEPIC converter to enable electrical isolation and high voltage gain using a coupled inductor. The input current ripple is significantly reduced by utilizing an auxiliary circuit that also functions as a lossless snubber circuit with an additional diode. Moreover, the maximum switch voltage stress is clamped to a low voltage by the snubber circuit. Therefore, a low voltage rating mosfet that has low $R_{{\rm{DS(on)}}}$ can be utilized as a main switch device. Hence, the total power efficiency is improved. Experimental results from a 100 W prototype, which are presented to verify the theoretic analysis and performance of the proposed converter. [ABSTRACT FROM PUBLISHER]

DC microgrids are popular due to the integration of renewable energy sources such as solar photovoltaics and fuel cells. Owing to the low output voltage of these dc power generators, high efficient high gain dc–dc converters are in need to connect the dc microgrid. In this paper, a nonisolated high gain dc–dc converter is proposed without using the voltage multiplier cell and/or hybrid switched-capacitor technique. The proposed topology utilizes two nonisolated inductors that are connected in series/parallel during discharging/charging mode. The operation of switches with two different duty ratios is the main advantage of the converter to achieve high voltage gain without using extreme duty ratio. The steady-state analysis of the proposed converter using two different duty ratios is discussed in detail. In addition, a 100 W, 20/200 V prototype circuit of the high gain dc–dc converter is developed, and the performance is validated using experimental results. [ABSTRACT FROM PUBLISHER]

In this paper, a single-phase multilevel ac/ac converter with reduced number of power semiconductor devices is proposed. For the simple case of a three-level converter, only three bidirectional switches and two capacitors are required. The proposed converter provides a highly sinusoidal and regulated output voltage with a simple topology. The efficiency is high because in each state of operation only one semiconductor conducts. The converter can be easily extended to any desired levels in the output voltage to even more reduce the output total harmonics distortion. Another advantage of the proposed converter is that by increasing the voltage levels, the stress on the switches will decrease. The proper performance of the proposed converter is confirmed through extensive simulation and experimental tests. [ABSTRACT FROM PUBLISHER]

In this paper, a power factor correction (PFC)-based switched reluctance motor (SRM) drive is proposed. Generally, the SRM drive is fed with a simple diode bridge rectifier followed by a bulky capacitor, which draws peaky current at low power factor and high-input-current total harmonic distortion (THD). Here, a dual output converter is proposed to control the SRM and to provide power quality improvement as well. This converter is a combination of Cuk and SEPIC converters, which produces two equal output voltages with neutral point N, to feed a midpoint converter of the SRM drive. The converter is designed to operate in discontinuous conduction mode of operation to obtain inherent PFC at supply side. The motor control is attained by regulating dc link voltage over a wide range. Test results on a prototype of the SRM drive demonstrate the excellent performance with high power factor and reduced input current THD. The observed power quality indices depict the improved power quality as per the standard IEC 61000-3-2. [ABSTRACT FROM PUBLISHER]

This paper proposes a single-stage light-emitting diode (LED) driver based on an inverted buck topology, using current path control switches. The proposed circuit consists of a control circuit, a bridge diode, and an inverted buck converter with multiple switches connected to the LED segments in parallel. Whereas the typical buck LED driver operates with a fixed LED forward voltage, the proposed driver operates with a variable LED forward voltage, according to the input voltage level. Because of this capability to adjust the LED forward voltage, it can reduce the current ripple and the switching frequency with a small inductance value. In addition, it enables operation with LED lamps of a wide voltage range, while simultaneously achieving small dead-angles. The detailed operation principles are described, and the design considerations for the proposed driver are discussed. The proposed driver circuit and control operation are verified experimentally using a 7 W hardware prototype with four LED segments. The obtained experimental results show that under a 110 Vrms input voltage, the proposed driver achieves a power factor of 0.94 with a small dead-angle and an efficiency of 94%. [ABSTRACT FROM PUBLISHER]