Search

One promising solution for future large wind turbine power conversion is to use medium-voltage power conversion systems for high efficiency and high power-density, e.g., by using a cascaded structure presented in this paper. However, a medium-frequency (MF) oscillation issue was observed while testing the experimental prototype of the above system. Given the complex multivariable coupling models of the multiwinding transformer and multiple inverters, conventional single-variable theories are not suitable. Therefore, this paper presents a new decoupling analysis method. Using a proposed linear transformation matrix, the output currents of multiple inverters can be transformed to a summation (grid) current and difference currents, where the former is the summation of inverter currents and the latter are the differences between currents of any two inverters. This transformation has enabled the use of single-variable theories, e.g., Bode diagram to analyze the summation current and difference current separately. It was found that the MF oscillation issue is caused by the equivalent impedance of the summation current being much larger than that of the difference current. Specifically, using small controller parameters cannot ensure the grid current quality and using large parameters may cause oscillation in the difference current. The proposed method can provide guidelines to design the parameters of current regulators and filters in multiple-inverter systems. Experimental results of a downscaled wind energy conversion system are presented to verify the proposed method. [ABSTRACT FROM AUTHOR]

Two three-level inverters driving an open-end winding induction motor can generate equivalent voltage waveforms as a single five-level inverter-based drive. In addition, it can bring in benefits such as reduced dc-link voltage, less number of devices, and fault-tolerant capability, which is favored in high-power motor drive applications. The main challenge with this type of configuration is the appearance of large zero-sequence current circulating between the two inverters, which generates extra losses in the switching devices and the motor as well as affects the normal operation of the machine. Another challenge is to balance the dc-link neutral point voltage of the two three-level inverters. This paper has proposed a simplified decoupled space-vector pulsewidth-modulation (PWM) strategy to eliminate the averaged zero-sequence voltage in each switching cycle by the placement of redundant vectors of each individual inverter using a time shift. Neutral point voltage balance is further achieved by adjusting the time duration of the redundant vectors. In this paper, it is shown that it is possible to operate this kind of drive configuration with a single dc power supply and achieve averaged zero-sequence voltage elimination and neutral-point voltage balancing at the same time. Experimental results of a 5.5-kW dual three-level inverter drive using the proposed PWM strategy are presented, which validates the control method and drive configuration. [ABSTRACT FROM PUBLISHER]