Search

In this paper, the loading effect of a Class E power amplifier (PA) driven 6.78 megahertz (MHz) wireless power transfer (WPT) system is analyzed at both circuit and system levels. A buck converter is introduced and controlled to track an optimal equivalent load that maximizes the system efficiency under uncertainties in the relative position of coils and the final load. For power control, an additional degree of freedom is provided by adding an ultracapacitor bank. A control strategy is proposed to track the maximum efficiency and charge/discharge the ultracapacitor bank through the on/off control of the Class E PA. Thus, high system efficiency can be maintained under various uncertainties and load power demands. Finally, the theoretical analysis and the control scheme are validated in experiments. The results show that the proposed Class E PA-driven MHz WPT system can stably achieve a high efficiency under different coil distances and various constant/pulsed power profiles. The measured highest system efficiency can reach 72.1% at a load power level of 10 W. [ABSTRACT FROM AUTHOR]

An inductive power transfer system is able to charge multiple receivers (RXs) through a single transmitter. In order to develop suitable control methods, this article explores and compares the influence of driving current and loading resistance on the efficiency and power distribution. It starts from a simple system with equal coupling and then extends the discussion to a general one. With proper simplification, an optimization problem is defined to derive several important factors, including the optimal driving current, optimal loading resistance, and the corresponding optimized efficiency under various application constraints. In the final experiments, the dynamic tuning of driving current is able to maximize the system efficiency to 92.1% for a general three-RX system. In another customized system with equal coupling, the maximum error between the achieved efficiency and the real maximum efficiency is 0.4% through the calculation-based current control. [ABSTRACT FROM AUTHOR]