Search

This article presents the operation of onboard integrated battery chargers tied to a nine-phase EV-drive train, shedding light on the charging performance during the postfault operation, when one or more faulty inverter legs are disconnected. The objective in that case is to ensure balanced grid currents, while maintaining minimum machine losses at zero average torque production. The proposed concept requires a minimalistic change from a control structure perspective to switch between the pre- and postfault cases. Limitations and fault cases are discussed and corroborated with experimental tests on a 1.5-kW prototype.The derived concept is parameter independent and applicable to nine-phase drives, irrespective of the type of rotor used. [ABSTRACT FROM AUTHOR]

This paper presents the steady-state mathematical model of a five-phase induction machine with a combined star/pentagon connection. The connection splits the stator winding into two five-phase windings displaced in space by $\pi$/10 and connected in a combined star/pentagon configuration. Recent work limited to an experimental investigation demonstrated that the connection possesses improved fault tolerance when compared to a conventional star-connected stator, as well as avoids the pentagon connection problems. Although the machine has five-phase terminals, it is intrinsically an asymmetrical ten-phase machine, which introduces additional subspaces in the machine's mathematical model. In order to theoretically investigate and thoroughly assess this connection against conventional connections, this paper introduces the steady-state mathematical model based on vector space decomposition and symmetrical component theory. Finite-element analysis is first used to investigate the different harmonic current components induced in the cage rotor circuit, upon which the effect of different subspaces can be clarified and the required transformation matrix from phase variables to their sequence components can be derived. The model is verified using a 1-kW prototype five-phase induction machine. [ABSTRACT FROM PUBLISHER]

Despite the increased interest in multiphase induction machines for safety-critical applications, machine parameter identification for the different sequence planes is still a challenging research point. In most available literature, the effect of nonfundamental sequence planes is overlooked due to the assumption of sinusoidal winding distribution and healthy operation. However, in a single layer or concentric winding layout with an odd number of phases, the effect of flux produced by nonfundamental sequence planes cannot be ignored for the open-phase case. This paper proposes a simple offline method to estimate the parameters of a five-phase induction machine corresponding to different sequence planes. The proposed technique can estimate the stator leakage inductance as well as the magnetizing inductance of both fundamental and third sequences by applying a quasi-square voltage to the stator winding while the machine is running at no-load. Consequently, the rotor circuit parameters of the fundamental sequence plane can be simply obtained by deducting the stator impedance from the blocked rotor machine impedance. For the third sequence plane, an approximate relation to estimate these parameters based on the measured fundamental sequence rotor parameters is also given. An experimental 1.5 Hp prototype machine is used to verify the proposed technique. [ABSTRACT FROM PUBLISHER]

Fractional slot concentrated windings (FSCWs), or modular windings, have shown promise with permanent magnet machines. However, their inability to produce high quality travelling fields has limited their application from spreading to induction machines. This paper presents the design considerations and tradeoffs involved in applying FSCWs to five-phase induction machines using the conventional three-phase lap wound machine as a reference. Previous work has touched upon the application of modular windings to three-phase induction machines, concluding that a conventional distributed winding is superior in terms of torque production and rotor bar losses. In applications such as high frequency induction machines and manually wound electrical submersible pump motors, the proposed machine topology provides advantages that may warrant its application despite an apparent power density penalty. In this paper, a prototype five-phase modular winding induction machine designed to significantly reduce the effect of space harmonics is investigated through simulations and experimentally. [ABSTRACT FROM PUBLISHER]