Search

By measuring the open-circuit radial stray magnetic flux density (RSMFD) of three spatial points, a novel diagnostic method for the eccentricity of interior permanent magnetic motors (IPMSMs) in electric vehicles is proposed. Outperforming traditional methods, the proposed method can noninvasively diagnose not only the severities of static eccentricity (SE), dynamic eccentricity (DE), and mixed eccentricity (ME), but also the eccentricity location. In this article, diagnosis results are described through three eccentricity parameters: SE ratio, DE ratio, and SE angle. First, an analytical model of the open-circuit RSMFD of the IPMSM is proposed, with its accuracy validated by experiments. The pattern of the impact of the eccentricity parameters on the open-circuit RSMFD is analyzed to form the basis of the proposed method. Then, an eccentricity prototype motor, which can continuously emulate the eccentricity according to any listed eccentricity parameters, is developed. A test rig is built to collect the open-circuit RSMFD and validate the analytical calculation results. Finally, an eccentricity diagnostic model based on the open-circuit RSMFD is established. The diagnosis results proved the noninvasiveness, effectiveness, and viability of the proposed method. [ABSTRACT FROM AUTHOR]

The dual-stator winding induction generator (DWIG) is an alternative main generator in a variable frequency ac power system. So far, the existing studies have not covered the issue of DWIGs excitation controllability, which is a matter of importance for airworthiness. In this article, we develop an impedance-based modeling and analysis technique to investigate DWIGs excitation controllability. Two related topics are presented: the spontaneous self-excitation analysis in uncontrolled system and the implicit internal self-excitation pattern analysis in actively controlled system. In the topic about spontaneous self-excitation, a virtual impulse source technique is developed to derive the impedance-based method properly in the analysis for uncontrolled DWIG. In the second topic, the analysis performed in the presence of a closed-loop controller figures out the same underlying mechanism in both the plant's open-loop stability and the spontaneous self-excitation. The experimental results verify the proposed analysis and techniques that benefit the comprehensive understanding and practical application of DWIG-based power system. [ABSTRACT FROM AUTHOR]

This paper presents an integrated control strategy for a starter/generator (S/G) system based on five-phase dual-stator winding induction machine (FPDWIM). The FPDWIM has a cage-type rotor and two sets of stator windings. One is a five-phase control winding (CW), and the other is a five-phase power winding (PW). In the starting mode, the FPDWIM works as a motor. The CW provides both active power and reactive power to drive the engine. In the generating mode, the CW mainly handles reactive power while the PW outputs active power. To achieve the integration of the starting and generating controls, indirect CW-flux-oriented control (ICWFOC) to operate in both starting and generating modes is proposed in this paper. In starting mode, the CW current and flux are controlled to output a constant starting torque; while in the generating mode, both CW and PW dc bus voltages are regulated. In this way, the principles and structures of the control strategies in both modes are compatible, resulting in a simpler implementation and improved performance. With the proposed control strategy, the system can complete the starting–generating operation with a smoother transition process. Simulation and experimental results are compared to validate the proposed control strategy. [ABSTRACT FROM AUTHOR]

Dual stator-winding induction generator (DWIG) is attractive in stand-alone power systems, and the aim of this paper is to develop the dc generating system of five-phase DWIG with an open phase. First, the relationship between flux and torque is constructed based on the reduced-order transformation, modified flux, and current. Second, the relation between modified voltage and current on the dq plane is constructed. The current of fundamental plane is used for the control loop of the power-winding voltage and control-winding voltage, respectively. Third, the current of the modified secondary subspace plane is used to control the five-phase DWIG operation at minimum control-winding loss. Finally, the simulation and experimental results are given to verify that the amplitude of phase current and output voltage can be regulated effectively by the proposed control strategy. [ABSTRACT FROM AUTHOR]