Search

This paper proposes a novel single-switch quasi-active power factor correction (PFC) converter based on two flyback dc/dc modules. To achieve a high efficiency, part of the input power is directly transferred to the load by the first dc/dc module. The rest of the input power is stored in the dc-bus capacitor and reprocessed by the second dc/dc module. Together, the dc-bus capacitor and the second dc/dc module also serve as a regenerative snubber. Furthermore, a quasi-active PFC circuit is provided to improve the power factor and to ensure the continuous current mode (CCM) operation of the input inductor without the need for sophisticated feedforward sensing and control mechanism. The quasi-active PFC circuit is driven by a magnetic switch, through the tertiary winding of the transformer of the first flyback module. The input current harmonics of the proposed converter meet the IEC 61000-3-2 (Classes A, C, and D) requirements. The dc-bus capacitor voltage is always less than the input voltage regardless of the load condition and is fairly invariant to large variations of the input voltages. High power factor with CCM operation and fast output voltage regulation have been achieved through a single-loop controller. Operating principles, analysis, and experimental results are presented to verify the effectiveness of the proposed converter. [ABSTRACT FROM PUBLISHER]

This paper discusses the major issues that exist in the single-stage ac/dc converters with power factor correction (PFC) and presents a novel converter based on a quasi-active PFC scheme. Two additional windings wound in the transformer of a conventional dc/dc flyback converter are used to drive and achieve continuous current mode operation of an input inductor. In addition, direct energy transfer paths are provided through the additional windings to improve the conversion efficiency and to reduce the dc bus capacitor voltage below 450 V for universal line applications. The proposed converter can be easily designed to comply with IEC 61000-3-2 Class D requirement and to achieve fast output voltage regulation. By properly tuning the converter parameters, a good tradeoff between efficiency, dc bus capacitor voltage stress, and harmonic content can be achieved. Operating principles, analysis, and experimental results of the proposed method are presented. [ABSTRACT FROM PUBLISHER]

A photovoltaic (PV)-based stand-alone power system is usually used to manage the energy supplied from several power sources such as PV solar arrays and battery and deliver a continuous power to the users in an appropriate form. Traditionally, three different dc/dc converters would have been used. To reduce the cost and improve the power density of the power system, an integrated solution of PV isolated dc/dc three-port converter (TPC) is proposed in this paper. Zero current switching can be achieved for all main diodes and MOSFETs to improve the efficiency, and a continuous input current of solar array is maintained by adding a magnetic switch derived from a fourth winding of the half-bridge transformer. Based on the energy-balancing part formed by boost, the control methods for the single module to realize maximum power point tracking (MPPT), battery charge control, and main bus regulation are proposed. The power system control method for multimodules in parallel is also derived, and the operation of the TPC power system can be transited between conductance mode and MPPT mode automatically. Finally, the experimental results verify that the proposed TPC, together with the proposed control method, meets the requirements of a high-power-density stand-alone PV-battery power system. [ABSTRACT FROM PUBLISHER]