Search

Fundamental-frequency and harmonic positive- and negative-sequence components detection is an important task for implementing power converters for renewable energy systems, uninterruptible power supplies, active power filters, dynamic voltage restorers, and also for power systems protection relays. Detection techniques of this kind are generally implemented in digital signal processor (DSP) with the execution time limited by the sampling period. The computational effort of the control algorithm can considerably increase the execution time, due to the sequential nature of processing in DSP. A promising technique for sequence components separation of three-phase signals is the so called the generalized delayed signal cancelation—phase locked loop (GDSC-PLL). Field programmable gate array's (FPGA's) capacity of exploring the parallelism of operations present in the GDSC-PLL is demonstrated in this paper through the mapping of this technique directly in hardware, allowing for a much shorter execution time than in DSP. The proposed architecture is presented, and the efficient detection of the fundamental-frequency positive-sequence with FPGA is demonstrated, with the obtained results compared with a traditional DSP implementation. In particular, the advantages and possibilities of the use of FPGA are demonstrated in comparison with the DSP. For this comparison, a metric for evaluating the capacity of complexity increase in application algorithms is proposed. [ABSTRACT FROM PUBLISHER]

In this paper, two methods for determining the fundamental frequency and harmonic positive- and negative-sequence components of three-phase signals are investigated. Many aspects of the space-vector discrete Fourier transform and generalized delayed signal cancellation (GDSC) such as response time for different possible implementations, frequency adaptation schemes, stability of recursive implementation, and rounding error effects are discussed. A new design procedure for GDSC transformations is presented. New indices for characterizing three-phase unbalanced and distorted signals are proposed. Simulations and experiments are included in order to verify the performances and illustrate the theoretical conclusions. [ABSTRACT FROM PUBLISHER]

The main contribution of this paper is the proposal of new modulation techniques for three-phase transformerless neutral point clamped inverters to eliminate leakage currents in photovoltaic systems without requiring any modification on the multilevel inverter or any additional hardware. The modulation techniques are capable of reducing the leakage currents in photovoltaic systems by applying three medium vectors or using only two medium vectors and one specific zero vector to compose the reference vector. In addition, to increase the system utilization, the three-phase neutral point clamped inverter can be designed to also provide functions of active filter using the p–q theory. The proposed system provides maximum power point tracking and compensation of current harmonics and reactive power. To validate the simulation models, an experimental three-phase inverter is used to evaluate leakage currents and the dc link voltage control. [ABSTRACT FROM AUTHOR]

In this paper, a space-vector discrete-time Fourier transform is proposed for fast and precise detection of the fundamental-frequency and harmonic positive- and negative-sequence vector components of three-phase input signals. The discrete Fourier transform is applied to the three-phase signals represented by Clarke's αβ vector. It is shown that the complex numbers output from the Fourier transform are the instantaneous values of the positive- and negative-sequence harmonic component vectors of the input three-phase signals. The method allows the computation of any desired positive- or negative-sequence fundamental-frequency or harmonic vector component of the input signal. A recursive algorithm for low-effort online implementation is also presented. The detection performance for variable-frequency and interharmonic input signals is discussed. The proposed and other usual method performances are compared through simulations and experiments. [ABSTRACT FROM AUTHOR]

In some photovoltaic (PV) applications, it is possible to remove the transformer of a system in order to reduce losses, cost, and size. In transformerless systems, the PV module parasitic capacitance can introduce leakage currents in which the amplitude depends on the converter topology, on the pulsewidth modulation, and on the resonant circuit comprised by the system components. Based on the common-mode voltage model, modulation techniques are proposed to eliminate the leakage current in transformerless PV systems without requiring any modification on the converter and any additional hardware. The main drawback is that the proposed modulation technique for two-level inverters can only be used with 650-V dc link in the case of a 110-V (rms) grid phase voltage. Comparisons among the modulation techniques are discussed, and it is proven that the proposed modulation for two- and three-level inverters presents the best results. To validate the models used in the simulations, an experimental three-phase inverter is used. [ABSTRACT FROM AUTHOR]

In this paper, a novel scheme for obtaining the fundamental-frequency positive-sequence grid voltage is proposed. The method is based on four simple mathematical transformations; two of them are in the stationary reference frame, which are able to eliminate odd harmonics from the original signals. The other two transformations are implemented in a synchronously rotating reference frame in order to eliminate even harmonics. The output of the last transformation block is the input to a synchronous reference-frame phase-locked loop for detecting the frequency and position of the positive-sequence voltage vector. The proposed algorithm was verified through simulations and experiments by applying distorted and unbalanced signals, containing positive and negative-sequence components. The results are in agreement with those theoretically predicted and indicate that the proposed scheme has a great potential for use in grid-connected converter synchronization algorithms. [ABSTRACT FROM AUTHOR]

Abstract-This paper presents a modulation technique based on the generalized pulsewidth-modulation strategy for matrix converters. The proposed technique uses a discontinuous modulation to clamp each output leg of the converter during 1200 of the output voltage period, achieving a reduced number of switchings compared with the traditional modulation techniques. Aside from that, the major attraction of the proposed technique is an additional algorithm that lags the clamping of each output leg of the converter to synchronize it with the peak of the corresponding output current (load current), avoiding high switching losses (switching at high currents). Therefore, this technique reduces the number of switchings as well as guarantees only medium and low current switchings. Simulation and experimental results show the efficiency of the proposed technique. [ABSTRACT FROM AUTHOR]