Search

The dc-capacitor voltage drift is the main technical drawback of a multilevel diode-clamped converter (DCC) system. This paper proposes a space vector modulation (SVM)-based switching strategy that takes advantage of the redundant switching states of the SVM to counteract the voltage drift phenomenon of a five-level DCC-based back-to-back high-voltage direct-current (HVDC) converter system. The proposed strategy is based on online minimization of a quadratic cost function, associated with the voltage deviations of the dc capacitors. The salient feature of the proposed strategy is that it enables voltage balancing of the dc capacitors with no requirements for offline calculations, additional controls, or auxiliary power circuitry. Performance of the proposed SVM-based balancing strategy for a back-to-back HVDC converter system, based on time-domain simulation studies in the PSCAD/EMTDC environment, is evaluated and experimentally verified. The studies demonstrate capability of the proposed SVM strategy to control and maintain voltage balance of dc capacitors. Index Terms--AC-DC-AC converter, dc-capacitor voltage balancing, high-voltage direct-current (HVDC) transmission, multilevel converter, sinusoidal pulsewidth modulation (SPWM), space vector modulation (SVM).

The phenomenon of dc-capacitor-voltage drift is the main technical drawback of a passive front-end multilevel diode-clamped converter (DCC). This paper formulates and analyzes the dc-capacitor-voltage-drift phenomenon of a passive front-end five-level DCC, which operates based on a sinusoidal pulsewidth-modulation (SPWM) switching strategy. The analysis shows dependence of the voltage drift on the modulation index and the ac-side power factor of the DCC. The analysis concludes that an SPWM strategy, without the use of auxiliary power circuitry, is not able to prevent the voltage-drift phenomenon of a five-level DCC. This paper also proposes a space-vector-modulation (SVM)-based switching strategy that takes advantage of redundant switching vectors of the SVM method to counteract the voltage-drift phenomenon. The limit to the range of operation of a five-level DCC, which is based on the proposed SVM strategy, is also presented. The salient feature of the proposed strategy is that it enables voltage balancing of the dc capacitors with no requirements for additional controls or auxiliary-power circuitry, within the specified range of operation. The performance of a DCC under various operating conditions, based on time-domain simulation studies in the MATLAB/SIMULINK environment, is evaluated. This paper demonstrates capability of the proposed SVM strategy to control and maintain voltage balance of dc capacitors. Index Terms--Capacitor-voltage balancing, multilevel converter, sinusoidal pulsewidth modulation (SPWM), space-vector modulation (SVM).

A sequential switching strategy for hybrid dc circuit breaker (CB) is proposed to improve transients during dc fault interruption in multiterminal high voltage direct current (HVdc) grids. Compared to the conventionally tripped dc CB, the proposed switching strategy, which sequentially trips the breaking modules within the CB, reduces the peak fault current and overvoltage as well as fault clearance time. These metrics are analytically computed through a time-domain calculation approach considering the traveling wave phenomena in dc transmission systems. By rescheduling the tripping sequence and optimal rating and number of individual modules of the CB, the energy distributed among the modules is well balanced. Finally, an analytic evaluation of the proposed sequential tripping is performed and, subsequently, the best practice and the optimal design process are provided. Performance of the sequential switching strategy as well as the optimal design process are verified through simulation studies in the PSCAD/EMTdc software environment. [ABSTRACT FROM AUTHOR]

The dc–dc modular multilevel converter (MMC), which has originated from the ac–dc MMC circuit topology, is an attractive converter topology for interconnection of medium-/high-voltage dc grids. Proper operation of the dc–dc MMC necessitates injection of an ac circulating current to maintain its submodule (SM) capacitor voltages balanced. The ac circulating current, however, needs to be minimized for efficiency improvement. In addition, a unique type of imbalance amongst the SM capacitor voltages that is caused by dc power flow needs to be mitigated. This paper proposes a closed-loop control strategy for the dc–dc MMC to simultaneously regulate the dc-link currents, maintain the SM capacitor voltages balanced, and minimize the ac circulating current. Performance and effectiveness of the proposed control strategy are evaluated based on simulation studies in the MATLAB Simulink and experimentally verified on a laboratory prototype. [ABSTRACT FROM AUTHOR]