Search

A photovoltaic (PV)-based stand-alone power system is usually used to manage the energy supplied from several power sources such as PV solar arrays and battery and deliver a continuous power to the users in an appropriate form. Traditionally, three different dc/dc converters would have been used. To reduce the cost and improve the power density of the power system, an integrated solution of PV isolated dc/dc three-port converter (TPC) is proposed in this paper. Zero current switching can be achieved for all main diodes and MOSFETs to improve the efficiency, and a continuous input current of solar array is maintained by adding a magnetic switch derived from a fourth winding of the half-bridge transformer. Based on the energy-balancing part formed by boost, the control methods for the single module to realize maximum power point tracking (MPPT), battery charge control, and main bus regulation are proposed. The power system control method for multimodules in parallel is also derived, and the operation of the TPC power system can be transited between conductance mode and MPPT mode automatically. Finally, the experimental results verify that the proposed TPC, together with the proposed control method, meets the requirements of a high-power-density stand-alone PV-battery power system. [ABSTRACT FROM PUBLISHER]

This paper presents a boost converter with a proposed tapped inductor ripple cancellation network. Based on the conventional boost converter (CBC), a small capacitor and a small inductor are added as the ripple cancellation network (RCN) in the proposed converter. Meanwhile, the tapped inductor can be easily realized by adding an extra tap in the main inductor of the CBC. Since the capacitor and inductor in the RCN do not need to handle the main power as the conventional LC input filter, the size and weight of the proposed converter are relatively small comparing the CBC with the LC input filter. The small signal and dynamic characteristics analyses show that the proposed converter has the same static and dynamic responses as the CBC, and the input current ripple cancellation can be achieved in all power ranges without significantly increasing the losses. Finally, three 36–50-V, 500-W prototypes operating at 100 kHz are implemented to verify the expected performance. The simulation and experimental results show that the proposed converters can achieve input current ripple cancellation with efficiency higher than 97.4% in all power ranges. [ABSTRACT FROM PUBLISHER]