Search

In this paper for power factor correction (PFC), a modified Landsman converter is introduced. The application is targeted for high-brightness (HB) projection application with brightness control for HB red–green–blue (HB-RGB) light-emitting diode (LED). A pulse-width modulation (PWM) technique is used for intensity control to achieve brightness control of the LED driver. The proposed PFC converter is used to feed a dual output flyback dc–dc converter that supplies power to the forced cooling unit and the LED module with galvanic isolation. The brightness control of LED is performed by synchronous buck converter. The modified Landsman converter operates in discontinuous output inductor current mode for PFC at universal ac mains. A prototype of the proposed LED driver is experimentally verified. The performance of proposed driver is evaluated at full and light-load condition for universal ac mains (90–265 V) over a full range of brightness. The power quality parameters are found within the acceptable limits of harmonic standard IEC 61000-3-2 for universal ac mains. [ABSTRACT FROM PUBLISHER]

In this paper, the switching cell concept is extended to isolated ac–ac converters, and a highly reliable double step-down ac–ac converter is proposed with high-frequency transformer (HFT) isolation. By using the switching cell structure and coupled inductors, the proposed converter has no commutation problem as it is immune from both short-circuit and open-circuit problems, even when all the switches are turned on or turned off, simultaneously. Therefore, it does not require pulse width modulation dead times along with bulky and lossy RC snubbers or voltage-sensing circuitry to implement soft-commutation strategies, resulting in high reliability and high quality output waveforms. The HFT in the proposed converter provides electrical isolation and safety which is required in applications such as dynamic voltage restorer (DVR), solid-state transformer (SST), etc., without the need for external bulky line frequency transformer. Moreover, all the passive components experience twice the switching frequency; therefore, their size can be reduced. The proposed converter is very suitable for application as DVR, to compensate both voltage sags and swells, owing to its ability to provide both inverting and noninverting outputs. A detailed theoretical analysis and operation of the proposed ac–ac converter are provided, and its applications as DVR and SST are also discussed. Experimental results with scaled-down prototype are also provided to verify its performance. [ABSTRACT FROM AUTHOR]