Search

This paper discusses the use of a cascaded multilevel converter for flexible power conditioning in smart-grid applications. The main feature of the proposed scheme is the use of independent dc links with reduced voltages, which makes such a topology an ideal candidate for medium- and high-power applications with increased reliability. The developed control strategy regulates independent dc-link voltages in each H-bridge cell, and allows the selective and flexible compensation of disturbing currents under a variety of voltage conditions without requiring any reference frame transformation. The selective control strategies are based on the decompositions proposed in the conservative power theory, which result in several current-related terms associated with specific load characteristics. These current components are independent of each other and may be used to define different compensation strategies, which can be selective in minimizing particular effects of disturbing loads. Experimental results are provided to validate the possibilities and performance of the proposed control strategies, considering ideal and deteriorated voltage conditions. [ABSTRACT FROM PUBLISHER]

In order to increase the output voltage levels and reduce the isolated dc sources, a symmetrical hybrid nine-level inverter for high-speed motor drive applications is presented in this paper. Each phase of this inverter is composed of a five-level dc/dc converter cell and an H-bridge cell. The dc/dc converter is operated at high frequency with low-voltage devices and the H-bridge is operated at fundamental frequency with high-voltage devices. The three phases are connected to a common dc-link and each drives an isolated winding of an open-winding motor. The operating principles and modulation method are introduced. A detailed analysis of the average currents through the flying capacitor and neutral point of the dc-link is presented and a capacitor voltage balancing method based on phase-shifted pulse-width modulation is proposed. Simulation and experimental results are presented to demonstrate the feasibility of this topology and control method. [ABSTRACT FROM PUBLISHER]

The advancement in power electronics has made the use of any number of phases in ac machines possible since with the inverter, any number of phase voltages can be realized as long as the corresponding inverter exists. To supply multiphase drives requires multiphase voltage source inverters (VSIs) whose output voltages depend very much on the methods of generating the pulses to turn on and turn off the inverter devices appropriately. This paper presents an analytical technique for the determination of the expressions for the modulation signals used in the carrier-based sinusoidal and generalized discontinuous pulse width modulation schemes for two-level, five-phase voltage source converters. These expressions can be used for both balanced and unbalanced phase voltages generated by any two-level multiphase inverter, in generating the required reference signals appropriately. An example of a five-phase VSI is presented to illustrate the strategy. Simulation and experimental results are presented in which a close examination shows that both results are similar for the balanced and unbalanced load voltage cases. [ABSTRACT FROM AUTHOR]