Search

The neutral-point voltage-balancing control is a critical issue of a neutral-point-clamped converter. The conventional control strategy is to inject the specific zero-sequence voltage to regulate the redundant vector, but it is unacceptable to the three-phase four-wire system. This paper provides a neutral-point voltage-balancing control by the dipolar modulation, and the control freedom of the zero-sequence voltage is flexible. Therefore, the proposed method is suitable for both three-phase three-wire and three-phase four-wire systems. Besides, the proposed method improves the control dynamic in a reactive power system. The proposed neutral-point voltage-balancing control is verified by the mathematical analysis and experimental results. The control dynamic, power loss estimation, and the output current performance are analyzed in this paper. [ABSTRACT FROM PUBLISHER]

This paper presents a variable switching point predictive current control (VSP $^2$CC) for the quasi-Z-source inverter (qZSI). The proposed VSP $^2$CC aims to remove the output current error on the ac side, as well as the inductor current and capacitor voltage errors of the quasi-Z-source network on the dc side of the converter. Unlike the previously presented direct model predictive control (MPC) strategies for the qZSI, the proposed control scheme can directly apply the switching signals not only at the discrete time instants, but at any time instant within the sampling interval. Consequently, the shoot-through state can be applied for a shorter time than the sampling interval, resulting in lower output and inductor currents ripples. Experimental results based on field programmable gate array are provided to verify the effectiveness of the introduced control method. As it is shown, the proposed method leads to lower inductor current ripples and less output current total harmonic distortion when compared with the conventional direct MPC. [ABSTRACT FROM AUTHOR]

In this paper, a novel space-vector pulse-width modulation (PWM) scheme for reducing the common-mode voltage (CMV) in the three-phase five-level active neutral-point clamped (5L-ANPC) inverter is proposed, where only the 55 selected voltage vectors among the entire 125 that produce low values of the CMV are utilized. This PWM scheme can significantly reduce the CMV without the increase of switching losses and total harmonic distortion of the output voltages. With the 55 selected voltage vectors, the inverter can still operate up to the maximum modulation index. In addition, the capacitor voltages are controlled by redundant switches of the 5L-ANPC inverters. It has been shown that the peak value of the CMV is decreased to one-twelfth of the dc-link voltage from the simulation and experimental results. [ABSTRACT FROM PUBLISHER]

One of the major drawbacks of high-ratio step-up transformers is the high value of their secondary-side capacitor. This value is reflected at the primary side, giving rise to a nondesirable one. There are some converters which include this capacitor in the topology and can cope with it, and even more, they need it. In particular, in high-voltage applications, we will find transformers with a large capacitance value since they use high-ratio step-up transformers. In this kind of applications, it is always interesting not to have inductors at the output filter, with single-capacitor filters being preferred instead. Thus, one of the simplest topologies is the parallel resonant converter (PRC) with a single-capacitor output filter. It can be controlled by the switching frequency and/or duty cycle, which makes zero voltage switching feasible in the power switches. In this paper, the PRC modeling and design and the experimental results are shown in a prototype delivering 3.5 kV and 260 W. [ABSTRACT FROM AUTHOR]