Search

This article is focused on the design of a high-voltage (800 V) bidirectional boost converter with high efficiency at medium-low power levels. Triangular current mode (TCM) enhances the efficiency of the converter at low power, thanks to soft-switching operation, but it requires variable switching frequency and large current ripple through the inductor. The former can be implemented by using silicon carbide (SiC) mosfets and the latter can be minimized by using interleaved modules. At low power, TCM requires high switching frequency, a minimum negative inductor current, and a minimum deadtime to obtain zero voltage switching. These values vary for different input/output voltage ratios and must be properly selected to reduce deadtime losses, normally neglected in the literature since it is assumed that they have low impact. However, it can be relevant at high frequencies (especially for devices with high reverse conduction voltage drop, such as SiC mosfets). In this article, deadtime losses are included in the proposed losses models and the selection of optimum values of deadtime and minimum inductor current to minimize these deadtime losses are analytically evaluated and experimentally validated. [ABSTRACT FROM AUTHOR]

This paper discusses the energization and start-up process of modular three-stage solid-state transformers (SSTs) based on a cascaded H-bridge topology. A key element of the SST is the auxiliary power supply (APS) feeding the auxiliary circuitry. Redundancy and simpler implementation can be achieved by powering the APSs from the dc-link capacitors of cells, but at the expense of a more challenging start-up process of the SST. The first step of this process must be performed before APSs are operative. This can result in undesired transient events (inrush currents, voltage sags in the capacitors voltages, etc.), which could prevent a proper start-up of the SST or even jeopardize the power devices or other elements. A simple strategy for the energization and start-up of SSTs using this APS structure is proposed. The method is valid for both grid-forming and grid-feeding operations of the SST, regardless of the energization port and without the addition of any extra circuitry. Simulation and experimental results are provided. [ABSTRACT FROM AUTHOR]

This paper describes a modular architecture based on the dual-active bridge (DAB) converter in input-series–output-parallel (ISOP) connection. This work is focused on the input voltage sharing to ensure a proper operation of each module by means of an active control of input and output voltages. A small-signal model of the modular architecture is proposed and a decoupled control loops’ scheme is used to implement the control strategy. An experimental setup has been built in order to validate the model of the DAB converter in ISOP connection and the proposed control strategy, taking different operating conditions and constructive parameter values into account. [ABSTRACT FROM AUTHOR]