4 results
Search Results
2. Assessing the Performance of ROCOF Relay for Anti-Islanding Protection of Distributed Generation Under Subcritical Region of Power Imbalance.
- Author
-
Alam, Mollah Rezaul, Begum, Most. Tasneem Ara, and Muttaqi, Kashem M.
- Subjects
RECEIVER operating characteristic curves ,REACTIVE power ,DIGITAL computer simulation - Abstract
In practice, the load-curve and distributed generation (DG) penetration level determines the power imbalance level that a network can experience if islanding occurs. Therefore, with the prior knowledge of load-curve and DG penetration level, the setpoint of rate-of-change-of-frequency (ROCOF) relays can be adjusted so as to make them suitable for a real network. This paper first investigates the subcritical power imbalance region of ROCOF relays through analytical formulation followed by extensive simulation study in order to establish the maximum boundary limit of ROCOF's nondetection zone (NDZ) under all possible deficit/excess of active and/or reactive power imbalance scenarios. Second, ROCOF's reliability (assessed by detection rate and false alarm rate) is expressed analytically and then, validated numerically by simulating a test network of Australia in MATLAB and OPAL-RT real-time digital simulation platform. Finally, ROCOF's performance is assessed through receiver operating characteristics curves and a detailed reliability study under variable setpoints and detection time of the relays; the assessment considers the number of islanding events associated with the time-wise percentage of power imbalance level computed from the net load demand and variable DG penetration in a real network. All these test results demonstrate a clear operational guideline for ROCOF relay. [ABSTRACT FROM AUTHOR]
- Published
- 2019
- Full Text
- View/download PDF
3. Optimal Capacity of Solar PV and Battery Storage for Australian Grid-Connected Households.
- Author
-
Khezri, Rahmat, Mahmoudi, Amin, and Haque, Mohammed H.
- Subjects
SOLAR batteries ,BATTERY storage plants ,ENERGY storage ,PHOTOVOLTAIC power generation ,HOUSEHOLDS ,ELECTRIC power consumption ,ENERGY management - Abstract
This article determines the optimal capacity of solar photovoltaic (PV) and battery energy storage (BES) for grid-connected households to minimize the net present cost of electricity. The real-time rule-based home energy management systems using actual annual data of solar insolation, ambient temperature, household electricity consumption, and electricity rates are used in the optimization process. The above-mentioned technique is applied to two system configurations—household with a solar PV and a BES. The uncertainty analysis is implemented using ten years of real data to confirm the optimal results. An accurate cash flow analysis is also presented to illustrate the customer payment in each year during the project lifetime. The sensitivity analysis is conducted by varying the cost and capacity of system components, grid constraint, average daily electricity demand, and retail price of electricity. A typical grid-connected household in South Australia is considered as the case study. A practical guideline is presented for the residential consumers in South Australia to select the optimal PV/BES based on their daily average electricity demand and the available rooftop space for PV installation. Finally, the proposed optimization method is applied to households of other Australian States and a comparison of results is presented. [ABSTRACT FROM AUTHOR]
- Published
- 2020
- Full Text
- View/download PDF
4. A Cost–Benefit Analysis of Electric Loaders to Reduce Diesel Emissions in Underground Hard Rock Mines.
- Author
-
Jacobs, William, Hodkiewicz, Melinda R., and Braunl, Thomas
- Subjects
ELECTRICAL load ,COST effectiveness ,HARD rock mining ,DIESEL motor exhaust gas ,MINERAL industries - Abstract
With recent developments in understanding the adverse health effects of diesel particulate matter (DPM) and growing emphasis on sustainability, zero-emission electric vehicles are becoming an increasingly common option in underground mining systems. As exposure regulations become stricter and with potential savings in the cost of ventilation, fuel, and consumables, there is also rising economic incentive to consider alternatives to diesel machinery. As a result, the diesel–electric debate is fundamental to any underground mining company's triple bottom line. A cost–benefit analysis for electric load haul dump units (eLHDs) was conducted in the context of Western Australian underground hard rock mines. This included a review of the issues affecting the diesel–electric debate and the development of a parametric life-cycle-cost model. The results indicate that eLHDs are not yet a universal solution to all underground mining systems. eLHDs can offer lower operating costs and do contribute many qualitative benefits, particularly with respect to reduced exposure to DPM. However, they also have several drawbacks, primarily associated with trailing cable management. Nevertheless, with a suitable mine design, eLHDs are a viable option and could provide a pathway for zero-emission electric machinery in the Australian mining industry.
Preamble —Western Australia is one of the world's leading mineral provinces. In the 2012–2013 financial year, Western Australia's mineral and petroleum sales totaled A$102 billion, representing some 42 $\%$ of Australia's total merchandise exports. As such, changes to the Western Australian mining industry has national and international economic implications. [ABSTRACT FROM PUBLISHER]- Published
- 2015
- Full Text
- View/download PDF
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.