Search

Dual-active-bridge (DAB) converters have been widely recognized as one promising topology for high-frequency-link power conversion applications. However, one critical issue concerning DAB converters is the transient dc-bias current due to the voltage-second imbalance, which may occur frequently in typical dynamic operations of DAB converters such as the start-up, sudden load or output voltage change, and power flow direction change. Due to the high-frequency operation, the dc-bias current of DAB converters will impose more harm to magnetic components because of the limited range of operating flux density and possible magnetic saturation compared with the counterpart low-frequency dc-bias current. Over the past several years, extensive researches have been conducted to address the high-frequency transient dc-bias current of DAB converters under different phase-shift modulation strategies such as single phase shift, extended phase shift, and triple phase shift. In this article, a comparative review of typical dc-bias current mitigation strategies under typical phase-shift strategies for DAB converters is presented. An experimental evaluation of selected strategies under various scenarios is conducted in terms of the settling time, inductor current stress, efficiency, switching number, and implementation complexity. This article ends up with an overview of high-frequency dc-bias mitigation strategies and a discussion for the further optimization. [ABSTRACT FROM AUTHOR]

As key component for the flexible dc distributed power system, the dual active bridge (DAB)-converter-based solid-state transformer (SST) with high efficiency for a wide operating range is essential. However, with the traditional phase-shift control, high backflow power and current stress will significantly affect the conversion efficiency. In this paper, the backflow power characteristics in both sides of DAB-based SST converters are comprehensively analyzed. On this basis, complete transmission power, backflow power, and peak current mathematical models are established. Then, a minimum-backflow-power-based extended-phase-shift control strategy is proposed with the determination of optimal phase-shift pairs by using the Karush–Kuhn–Tucker function for various scenarios. The backflow power and current stress curves with different algorithms are compared. It shows the proposed control can improve the output power regulation flexibility, minimize the backflow power, and improve the efficiency in wide operating range. Finally, a DAB-based SST prototype was developed and the experimental results verified the effectiveness of the proposed control strategy. [ABSTRACT FROM AUTHOR]

This paper presents a novel reactive-power minimization method under the three-level modulated phase-shift control to improve the efficiency for a wide operation condition. First, in order to unify all operation modes, a mathematic model of the dual-active-bridge converter with the three-level modulated phase-shift control by a harmonic analysis method is obtained. Then, the detailed analysis of the odd-order harmonic components of the active and reactive powers varied with the multiple control dimensions is presented. The soft-switching boundaries with respect to the voltage ratio and unified active power are specified. On this basis, a novel optimal three-level phase-shift (OPS) control strategy for minimizing reactive power is proposed. Experimental results of reactive power and operation efficiency among the proposed OPS method, and other methods are compared to verify the effectiveness of the OPS algorithm. [ABSTRACT FROM PUBLISHER]