Search

This paper presents a comprehensive analysis of permanent magnet synchronous machine stator winding impedance variation in inter-turn short-circuit and eccentricity faults. The phase impedances are monitored through an extended self-commissioning procedure at the standstill mode before or after operation, and hence are agnostic to well-known issues caused by transients, load/speed level, or controller coefficient dependency. Moreover, the effect of stator iron core saturation on the electrical parameters is analyzed in depth. In order to distinguish the inter-turn shorts from the eccentricity fault which exhibits similar behaviors, a classification algorithm based on the saturation effect is introduced and analyzed on the machines with different pole-slot combinations. Both two-dimensional finite element analysis simulation and experimental test results are provided to show the efficacy of this analysis. [ABSTRACT FROM PUBLISHER]

The research on noninvasive incipient fault diagnosis of power converters is very critical to avoid strenuous periodic check-ups and costly interruptions. Thermal cycling is one of the main techniques to accelerate the package-related failure progress. In this paper, first, a custom designed accelerated aging platform that can expose multiple discrete power MOSFETs to thermal stress simultaneously is introduced. Based on the collected experimental data, the variation of the on-state resistance is identified as the failure precursor, and an exponential degradation model that fits successfully with the experimental data are developed. The remaining useful lifetime (RUL) of degraded power MOSFETs is estimated through classical least-squares algorithm run on experimental data filtered by Kalman Filter which deals with the measurement noise and model uncertainties. The essential advantage of the proposed method is that it does not require junction temperature information. The RUL estimation with limited field data is demonstrated on a number of experimental results. [ABSTRACT FROM PUBLISHER]

This paper proposes a new vector-based dead-time compensation method for three-level T-type converters. The origins and effects of the dead-time voltage errors are analyzed in detail for different switching commutations and load conditions. In order to eliminate the dead-time distortion in each phase, a dead-time error voltage vector is introduced to adjust the reference voltage vector depending on load current polarity. The proposed vector-based dead-time compensation scheme has several advantages. First, it can be applied to multilevel converters with any number of voltage levels using any modulation schemes. Second, the pulse loss issue which is common in conventional pulse-based compensation strategies can be eliminated. In addition, the pulse saturation can be mitigated by operating the converters in overmodulation regions. All of these advantages and effectiveness of the proposed vector-based dead-time compensation method are verified through both simulation and experimental studies. [ABSTRACT FROM AUTHOR]

In this paper, magnet defect faults and their corresponding reflections on permanent-magnet (PM) motor stator variables are investigated. An analytical approach based on a partitioned magnetic equivalent circuit is developed to determine the influence of magnet defect faults on PM motor variables. Due to the flexibility of the proposed method, the effect of each rotor magnets on each stator coil can be calculated to obtain the induced back electromotove force under faulty cases and observe the fault-related signatures in the frequency spectrum. The proposed tool significantly reduces the computational burden and provides sufficient accuracy, which significantly eases to simulate several magnet fault scenarios and examine detailed topology dependence relations in shorter time. Different cases, including various numbers and locations of defected magnets, winding configurations, and crack direction effects, are studied to understand the magnet defect influences comprehensively. The experiments and simulations are carried out at different speeds and load conditions to fully characterize the fault signatures. Comparative 2-D finite-element simulations and experimental results justify the theoretical magnet defect fault analysis and show the efficacy of the proposed approach. [ABSTRACT FROM AUTHOR]