Search

A fiber-optic pH sensor, based on layer-by-layer (LBL) self-assembly and surface plasmon resonance (SPR) technology, is proposed and experimentally confirmed. This article proposes poly (diallyldimethylammonium chloride) (PDDA) as the pretreatment solution for the surface of the gold film and the highly sensitive polyacrylic acid/chitosan (PAA/CS) self-assembled nanomembrane as the pH-sensitive film. It has been experimentally verified that the sensor can detect pH from 3.18 to 11.84 and it exhibits a high average sensitivity of 32.31 nm/pH in this range. In addition, experiments have confirmed that the sensor has attractive stability, repeatability, and hysteresis characteristics. [ABSTRACT FROM AUTHOR]

A reflective optical fiber nickel ion (Ni2+) sensor based on surface plasmon resonance (SPR) and surface ion imprinting was proposed and demonstrated. The sensor is made of multimode optical fiber with a core diameter of 600 $\mu \text{m}$ and coated with a gold film for an exciting SPR effect. To realize highly sensitive and highly selective detection of Ni2+, graphene oxide (GO) and Ni2+-imprinted Chitosan (IP-CS) are subsequently combined on the sensor surface. The GO can not only act as the intermediate binder between the Au film and the CS but also increase the sensitivity of the sensor. The Ni2+ holes on the IP-CS can realize the specific capture of Ni2+. The experimental results show that the sensitivity of the sensor to Ni2+ is 5.220 nm/[lg(mg/L)] with a limit of detection of $2.393\times 10^{-3}$ mg/L, and the selectivity of the sensor is significantly improved after imprinting. Besides, the sensor has good stability and repeatability, and fast responsiveness. [ABSTRACT FROM AUTHOR]

A new type of two-channel surface plasmon resonance (SPR) sensor based on hollow-core fiber (HCF) for simultaneous measurement of seawater salinity and temperature was presented in this article. One of the SPR channels that are excited on the outer surface of the HCF with Au film coating was used to measure the seawater salinity, while another SPR channel that is excited on the inner surface of the HCF with Ag film coating and polydimethylsiloxane (PDMS) infiltration was used for seawater temperature measurement at the same time. The experimental results showed that the salinity sensitivity and temperature sensitivity of the sensor could reach 0.3769 nm/‰ and −0.956 nm/°C, respectively. This demonstrated that the two-channel SPR sensor not only showed the possibility in the simultaneous measurement of two parameters with high sensitivity, excellent stability, small size, and high mechanical strength but also shed new light on the multiparameter measurement fields and the development of lab-in-fiber sensors. [ABSTRACT FROM AUTHOR]

A new type of two-channel surface plasmon resonance (SPR) sensor based on hollow-core fiber (HCF) for simultaneous measurement of seawater salinity and temperature was presented in this article. One of the SPR channels that are excited on the outer surface of the HCF with Au film coating was used to measure the seawater salinity, while another SPR channel that is excited on the inner surface of the HCF with Ag film coating and polydimethylsiloxane (PDMS) infiltration was used for seawater temperature measurement at the same time. The experimental results showed that the salinity sensitivity and temperature sensitivity of the sensor could reach 0.3769 nm/‰ and −0.956 nm/°C, respectively. This demonstrated that the two-channel SPR sensor not only showed the possibility in the simultaneous measurement of two parameters with high sensitivity, excellent stability, small size, and high mechanical strength but also shed new light on the multiparameter measurement fields and the development of lab-in-fiber sensors. [ABSTRACT FROM AUTHOR]

A novel, highly sensitive dual-parameter sensor based on tandem-interferometric arrangement of Fabry–Pérot interferometer and Mach–Zehnder interferometer (MZI) has been designed and implemented in this paper. The sensor is composed of a single-mode fiber (SMF), hollow-core fiber, no-core fiber (NCF), and photonic crystal fiber (PCF). Those can simultaneously form a Fabry–Pérot interferometer and a MZI. The both interferometers are able to measure strain. Meanwhile, the PCF was filled with liquid crystal to measure electric field intensity. Hence, simultaneous measurement of electric field and strain can be achieved. The sensitivities of electric field and strain can reach up to 10.5 nm/(kV/mm) and 1.25 pm/ $\mu \varepsilon $ , respectively. [ABSTRACT FROM PUBLISHER]

A new in-line mode coupling interferometer based on photonic crystal fiber (PCF) was designed for hydrogen sensing. The external surface of the PCF was coated with Pd-WO3 hydrogen-sensitive film using the sol–gel scheme. Pd-WO3 film refractive index and volume changing influenced the model of the PCF interferometer while the hydrogen concentration was changing, which caused the output spectrum to shift. Therefore, the relationship between the wavelength shift and the hydrogen concentration was established. In the experiment, the wavelength shift showed good linearity as the hydrogen concentration changed from 0% to 1%, while the sensitivity was 1.09 nm/% and the detection resolution was 0.3 perthousand. The sensor showed good repeatability and the wavelength error was less than 40 pm in 30 min. In addition, the sensor was not affected by external temperature fluctuations, which indicates good practical development prospects. [ABSTRACT FROM AUTHOR]

A novel, highly sensitive double-parameter sensor based on the composite interference structure has been designed and implemented in this paper. It can be regarded as a cascade of the traditional single-mode fiber (SMF)–hollow-core fiber (HCF)–photonic crystal fiber (PCF)-SMF structure, which forms a reflected Fabry–Perot interferometer and a transmitted Mach–Zehnder interferometer at the same time. The HCF is filled with ethanol, which is sensitive to temperature. Then the simultaneous measurement of the temperature and the refractive index (RI) can be achieved by monitoring the reflected spectrum and transmitted spectrum. The fact that these two spectrums do not interfere with each other makes it easier to obtain a demodulation method for simultaneous temperature and RI measurement that does not involve complex fast Fourier transform and matrix computation. The sensitivities of the temperature and the RI can reach up to 0.454 nm/°C and 178.7 nm/RIU, respectively. [ABSTRACT FROM AUTHOR]

A method for simultaneous measurement of magnetic field and temperature with high sensitivity and high precision was realized according to magnetic fluid (MF)-infiltrated photonic crystal cavity, where two different types of MF were, respectively, infiltrated into certain air holes adjacent to a waveguide to form two cascaded cavities. As the refractive index (RI) of MF is dependent on external magnetic field and temperature, the two independent resonant dips of cascaded cavities that can be simultaneously monitored at the output spectrum of the waveguide would all shift with the change of external magnetic field or temperature. Using finite-difference time-domain method, the RI sensitivity of the proposed cavity was firstly analyzed and optimized, and then the linear relationships between the shifts of two resonant wavelengths and external magnetic field/temperature were calculated. Finally, combined with the dual-wavelength matrix method, the magnetic field detection limit could reach to 1.333\times 10^\mathbf -4 T with the uncertainty of \pm 0.22 \times 10^\mathbf -4 T (coverage factor k = 2) and detection range from 0 to 0.06 T. Simultaneously, the temperature detection limit could reach to 0.301 K with the uncertainty of ±0.051 K (k = 2) and detection range from 250 to 340 K. [ABSTRACT FROM PUBLISHER]