Search

Power losses in soft magnetic materials can be solidly assessed by the statistical theory of losses (STLs), which provides physical foundation to the concept of loss separation. The theory is, however, limited to the conventional case of symmetric hysteresis loops and cannot be straightforwardly applied for a magnetic core operating under a dc bias. We show, in this paper, that such constraint can be released by combining the STL with a simplified approach to the dynamic Preisach model. This approach leads to the more affordable static Preisach model with largely reduced computation time. In this way, the hysteresis and excess loss components, with and without dc bias, are identified and calculated starting from a minimum set of experimental data. We provide a wide-ranging experimental validation of the theory, which is applied to the behavior of the energy loss versus frequency, measured up to $f = 1$ kHz, in non-oriented and grain-oriented iron-silicon sheets and in iron-cobalt alloys, subject to different polarization bias levels. [ABSTRACT FROM AUTHOR]

This paper studies the effect of common-mode voltage elimination (CMVE) on the iron loss of electrical machine core laminations under multilevel converter supply. Three identical magnetic ring cores are excited by either a three-level converter or a five-level voltage source converter to study the behavior of CMVE on a three-phase system. Both multilevel converters are controlled by using a space vector pulsewidth modulation as it is one of the most often used techniques for CMVE. These experimental results are confirmed numerically with a dynamic iron loss model. In addition, the effect of CMVE, at different switching frequencies, on the core loss of a synchronous machine is numerically studied. The results presented in this paper show that the core loss is considerably increased when the CMVE is implemented. However, this iron loss increase in the five-level drive systems is lower compared with the three-level ones. Therefore, it is important that the designers of drive systems take such effects into consideration. [ABSTRACT FROM AUTHOR]

High-speed permanent magnet machines, supplied by pulsewidth modulation (PWM) voltage source inverters, operate with distorted stator currents. Harmonics present in these stator currents deteriorate the machine performance by generating losses. Mostly, these losses are following the machine design using a transient finite-element model. The precise measurement of these rotor eddy-current losses is extremely difficult, hence, only a few papers provide convincing comparisons between predictions and measurements. This paper presents a fast and precise analytical approach, verified with measurements, to consider rotor losses of machines, supplied by PWM voltages, already during the design procedure. [ABSTRACT FROM AUTHOR]

The pulsewidth modulation (PWM) technique is commonly used to supply modern high-speed electrical machines. The fundamental frequency is typically in the kilohertz range, with switching frequencies of several tens of kilohertz, as determined by the new SiC- or GaAs-based power transistors modules. Switching introduces minor loops in the major hysteresis cycle, with durations of the order of 100~\mu \texts or lower, with the resulting magnetization dynamics influenced by strong skin effect. However, since these minor loops have relatively small amplitude, their constitutive equation may be described by an equivalent permeability (real or complex), depending on the mean slope of the minor loop and its static energy loss. By retrieving this permeability, the classical loss is straightforwardly calculated by analytical solution of Maxwell's equations. In this paper, we measure and calculate, according to the quasi-linear approximation for the minor loops, the magnetic energy losses of 0.194 mm thick non-oriented Fe–Si 3.2% sheets subjected to PWM induction waveform. Minor loop peak amplitudes ranging between 50 mT and 0.2 T and frequencies up to 10 kHz are investigated. The results are consistent with the proposed model, to within 5%. [ABSTRACT FROM AUTHOR]

In this paper, the investigation is focused on the iron loss prediction for electrical machines fed by low switching frequency inverter. An improved iron loss model is developed after reviewing various existing iron loss models considering pulse-width modulation (PWM) influence. In order to validate the improved iron loss model, iron loss tests are carried out on an electrical machine. The predicted iron loss results match well with the measured results, which shows that the improved iron loss model is able to predict iron loss in electrical machine fed by an inverter. The comparison between the predicted iron losses with and without considering the PWM influence shows that the iron loss can be significantly increased due to the influence of PWM, especially when the switching frequency is low. [ABSTRACT FROM AUTHOR]

This paper investigates a novel estimation method for iron losses considering hysteretic property and skin effect simultaneously. In the proposed method, iron losses considering both hysteretic property and skin effect are estimated by utilizing a 1-D finite element method as a postprocessing of the usual 2-D analyses based on ordinary magnetization curve. To demonstrate the effectiveness of the proposed iron loss estimation method, we compare numerical results with measured ones. Furthermore, the proposed method is applied to iron loss analysis of an interior permanent magnet motor fed by pulsewidth modulation inverter. [ABSTRACT FROM PUBLISHER]

In this paper, a comparative study of the effect of different converter topologies on the iron loss of nonoriented electrical steel is presented. Three converter topologies are considered in this investigation; namely: two-, three-, and five-level power converters. Moreover, the effect of the carrier frequency on both the iron loss and converter loss is introduced. The experimental results show a dramatic increase of the iron loss for the two-level converter, especially for low levels of the carrier frequency. Furthermore, the increase of the iron loss is negligible for the multilevel converter topologies. Specifically, the use of the five-level converter, even at a low value of the carrier frequency, results in lower iron losses than the three-level converter at a relatively higher carrier frequency. [ABSTRACT FROM AUTHOR]

This paper investigates the effects of a load on the iron loss of an electrical sheet using a ring specimen with a secondary coil under pulse width modulation inverter excitation. In this experiment, the resistance load is connected to the secondary coil to simulate the motor load. To investigate the iron loss under load, we derive two methods to calculate the iron loss: the current difference method (CDM) and the power difference method (PDM). In the CDM, the iron loss is determined using the differential between the input current from the power amplifier to the specimen and the output current from the specimen to the load and voltage of the B-coil. In the PDM, the iron loss is derived using the differential between the input and output power. The iron loss calculated using the CDM and PDM agrees well when the secondary coil is open circuit, whereas the difference in the iron loss between the CDM and PDM increases as the resistance of the load decreases, especially when the carrier frequency is high. [ABSTRACT FROM AUTHOR]

The paper presents a method for the estimation of the iron losses under PWM (Pulse Width Modulation) flux supply conditions. The computational results are validated versus measurements on Epstein's yoke. The proposed model is based on Finite Element method formulated in the harmonic domain and takes into account ferromagnetic hysteresis and eddy currents. A classical Preisach model is used for hysteresis modelling neglecting the effects of excess losses in field analysis. Different PWM supply conditions are measured and simulated with satisfactory agreement. [ABSTRACT FROM PUBLISHER]