Search

This paper develops a novel magnetomotive forces (mmfs) distribution model along the transverse direction for the 3-D analysis of linear induction motor, and it investigates the influence of a laterally asymmetric cap-secondary on the thrust, vertical force, lateral force, and efficiency in a prototype single-sided linear induction motor for linear metro. First, the mmf distribution model and its working conditions are defined, and the model is transferred into a mathematical model. Second, the air-gap flux and secondary eddy current in a prototype linear motor with a cap-secondary are obtained by a 3-D space harmonic analytical method. Third, the thrust, vertical force, lateral force, and efficiency of the test motor are analyzed with various lateral deflection, and the power factor in secondary is also presented. Finally, these results are experimentally verified by measurements on the test rig of the linear motor, and the comprehensive effect on the operating performance can be accurately calculated by the mmf model. [ABSTRACT FROM PUBLISHER]

This paper presents novel overlapping ironless windings for permanent magnet planar motors, which have high winding factors and make full use of the magnetic field of the magnet array in the planar motor. A simple analytical model of the planar motors is developed and validated by finite-element method first. Then the winding factors of the ironless windings are derived and used to simplify the analytical model. Furthermore, the design rules of the ironless windings for the planar motor are obtained from the analytical model with winding factors and the ironless windings are optimized for maximum steepness of the planar motor. Compared with the nonoverlapping ironless windings, the novel overlapping ironless windings have a much (up to 25%) larger force with the same copper loss and nearly the same size when the coils of the windings have a large length/width ratio. [ABSTRACT FROM PUBLISHER]

To investigate the noise reduction for an electrical machine, coupled magnetic field and mechanical analyses should be carried out. In this paper, the method of modeling the laminated core using a homogeneous core model with equivalent anisotropic parameters considering the laminated structure in the coupled magnetic field and mechanical analyses is proposed and the effect of the laminated structure on the coupled analysis is investigated. The distributions of the flux densities, nodal forces by electromagnetism and magnetostriction, and displacements corresponding to these forces of the real laminated iron core model, the solid core model neglecting the laminated structure and the homogeneous core model considering the laminated structure are obtained and compared. It is shown that the laminated structure cannot be neglected in both the magnetic field and mechanical analyses and the displacement distribution obtained from the homogeneous model is in good agreement with the real model. [ABSTRACT FROM PUBLISHER]