Search

In this paper, a 2-D locally regularized strain estimation method for imaging deformation of soft biological tissues from radio-frequency (RF) ultrasound (US) data is introduced. Contrary to most 2-D techniques that model the compression-induced local displacement as a 2-D shift, our algorithm also considers a local scaling factor in the axial direction. This direction-dependent model of tissue motion and deformation is induced by the highly anisotropic resolution of RF US images. Optimal parameters are computed through the constrained maximization of a similarity criterion defined as the normalized correlation coefficient. Its value at the solution is then used as an indicator of estimation reliability, the probability of correct estimation increasing with the correlation value. In case of correlation loss, the estimation integrates an additional constraint, imposing local continuity within displacement and strain fields. Using local scaling factors and regularization increase the method's robustness with regard to decorrelation noise, resulting in a wider range of precise measurements. Results on simulated US data from a mechanically homogeneous medium subjected to successive uniaxial loadings demonstrate that our method is theoretically able to accurately estimate strains up to 17%. Experimental strain images of phantom and cut specimens of bovine liver clearly show the harder inclusions.

This paper presents a novel segmentation methodology for automated classification and differentiation of soft tissues using multiband data obtained with the newly developed system of high-resolution ultrasonic transmission tomography (HUTT) for imaging biological organs. This methodology extends and combines two existing approaches: the L-level set active contour (AC) segmentation approach and the agglomerative hierarchical kappa-means approach for unsupervised clustering (UC). To prevent the trapping of the current iterative minimization AC algorithm in a local minimum, we introduce a multiresolution approach that applies the level set functions at successively increasing resolutions of the image data. The resulting AC clusters are subsequently rearranged by the UC algorithm that seeks the optimal set of clusters yielding the minimum within-cluster distances in the feature space. The presented results from Monte Carlo simulations and experimental animal-tissue data demonstrate that the proposed methodology outperforms other existing methods without depending on heuristic parameters and provides a reliable means for soft tissue differentiation in HUTT images.

Vessel plaque assessment by analysis of intravascular ultrasound sequences is a useful tool for cardiac disease diagnosis and intervention. Manual detection of luminal (inner) and media-adventitia (external) vessel borders is the main activity of physicians in the process of lumen narrowing (plaque) quantification. Difficult definition of vessel border descriptors, as well as, shades, artifacts, and blurred signal response due to ultrasound physical properties trouble automated adventitia segmentation. In order to efficiently approach such a complex problem, we propose blending advanced anisotropic filtering operators and statistical classification techniques into a vessel border modelling strategy. Our systematic statistical analysis shows that the reported adventitia detection achieves an accuracy in the range of interobserver variability regardless of plaque nature, vessel geometry, and incomplete vessel borders.

We present a new algorithm, called the soft-tissue filter, that can make both soft and bone tissue clearly visible in digital cephalic radiographies under a wide range of exposures. It uses a mixture model made up of two Gaussian distributions and one inverted lognormal distribution to analyze the image histogram. The image is clustered in three parts: background, soft tissue, and bone using this model. Improvement in the visibility of both structures is achieved through a local transformation based on gamma correction, stretching, and saturation, which is applied using different parameters for bone and soft-tissue pixels. A processing time of 1 s for 5 Mpixel images allows the filter to operate in real time. Although the default value of the filter parameters is adequate for most images, real-time operation allows adjustment to recover under- and overexposed images or to obtain the best quality subjectively. The filter was extensively clinically tested: quantitative and qualitative results are reported here.

In this paper, we are interested in soft tissue differentiation by multiband images obtained from the High-Resolution Ultrasonic Transmission Tomography (HUTT) system using a spectral target detection method based on constrained energy minimization (CEM). We have developed a new tissue differentiation method (called "CEM filter bank") consisting of multiple CEM filters specially designed for detecting multiple types of tissues. Statistical inference on the output of the CEM filter bank is used to make a decision based on the maximum statistical significance rather than the magnitude of each CEM filter output. We test and validate this method through three-dimensional interphantom/intraphantom soft tissue classification where target profiles obtained from an arbitrary single slice are used for differentiation over multiple other tomographic slices. The performance of the proposed classifier is assessed using receiver operating characteristic analysis. We also apply our method to classify tiny structures inside a bovine kidney and sheep kidneys. Using the proposed method we can detect physical objects and biological tissues such as styrofoam balls, chicken tissue, calyces, and vessel-duct successfully.

In current practice, only one out of three components of the tissue displacement vector and one of nine components of the strain tensor are accurately estimated and imaged in ultrasound elastography. Since, only the axial component of both the displacement and strain are imaged, other important elastic parameters, such as shear strains and the Poisson's ratio, also are not imaged. Moreover, reconstruction of the Young's modulus would be significantly improved if all components of the strain tensor were available. In this paper, we describe a new method for estimating all the components of the tissue displacement vector following a quasi-static compression. The method uses displacements estimated from radiofrequency echo-signals along multiple ultrasound beam insonification directions. At each spatial location in the compressed medium, orthogonal tissue displacements in both the axial and lateral direction with respect to the direction of the applied compression are estimated by curve fitting angular displacement vector data calculated for all insonification directions. Following displacement estimation in orthogonal directions, components of the corresponding normal and shear strain tensors are estimated. Simulation and experimental results demonstrate the utility of this technique for the computation of the normal and shear strain tensors.

As medical ultrasound imaging moves to larger apertures and higher frequencies, tissue sound-speed variations continue to limit resolution. In geophysical imaging, a standard approach for estimating near-surface aberrating delays is to analyze the time shifts between common-midpoint signals. This requires complete data-echoes from every source/receiver pair in the array. Unfocused common-midpoint signals remain highly correlated in the presence of delay aberrations; there is also tremendous redundancy in the data. In medical ultrasound, this technique has been impaired by the wide-angle, random-scattering nature of tissue. This has made it difficult to estimate azimuth-dependent aberration profiles or to harness the full redundancy in the complete data. Prefiltering the data with two-dimensional fan filters mitigates these problems, permitting highly overdetermined, least-squares solutions for the aberration profiles at many steering angles. In experiments with a tissue-mimicking phantom target and silicone rubber aberrators at nonzero stand-off distances from a one-dimensional phased array, this overdetermined, fan-filtering algorithm significantly outperformed other phase-screen algorithms based on nearest-neighbor cross-correlation, speckle brightness maximization, and common-midpoint signal analysis. Our results imply that there is still progress to be made in imaging with single-valued focusing operators. It also appears that the signal-to-noise penalty for using complete data sets is partially compensated by the overdetermined nature of the problem.

Multi-angle spatial compound images are normally generated by averaging the recorded single-angle images (SAIs). To exploit possible advantages associated with alternative combination schemes, this paper investigates both the effect of number of angles (Ntheta) as well as operator (mean, median, mean-excluding-maximum (mem), root-mean-square (rms), geometric mean and maximum) on image quality (tissue delineation and artifacts), speckle signal-to-noise ratio (SNRs) and contrast. The evaluation is based on in vitro SAI (+/-21 degrees in steps of delta theta = 7 degrees) of formalin fixed porcine tissue containing adipose, connective and muscular tissue. Image quality increased with number of angles up to +/-14 degrees after which the improvements became debatable. The mem and median operators, which try to render the images more quantitatively correct by suppressing strong echoes from specular reflectors, provide some improvement in this regard. When combining the SAI with the mean operator, the SNR, increases--in general--with Ntheta. For Ntheta = 2, the SNRs increases with delta theta as expected. When Ntheta = 7, the highest SNRs is obtained for the mem, rms, and geometric mean operators, while the lowest SNRs is obtained for the maximum operator. When comparing SNRs for adipose and fibrous tissue, the level is close to 1.91 for adipose tissue but only 1.7 for fibrous tissue which contain relatively few organized scattering structures.