Search

A linear-switch mode hybrid envelope tracking (ET) supply modulator utilizing adaptive biasing and gain enhanced current mirror operational transconductance amplifier (OTA) with class AB output stage in parallel with a switching regulator is presented. In comparison to a conventional OTA design with similar quiescent current consumption, proposed approach improves positive and negative slew rate from 50 to 93.4 V/ \mu \texts and −87 to −152.5 V/ \mu \texts , respectively, dc gain from 45 to 67 dB while consuming same amount of quiescent current. The proposed hybrid supply modulator achieves 83% peak efficiency, power-added efficiency (PAE) of 42.3% at 26.2 dBm for a 10-MHz 7.24-dB peak-to-average power ratio (PAPR) long-term evolution (LTE) signal and improves PAE by 8% at 6 dB back off from 26.2-dBm power amplifier (PA) output power with respect to fixed supply. With a 10-MHz 7.24-dB PAPR quadrature-phase shift keying LTE signal the ET PA system achieves adjacent channel leakage ratio (ACLR) of −37.7 dBc and error vector magnitude (EVM) of 4.5% at 26.2-dBm PA output power, while with a 10-MHz 8.15-dB PAPR 64QAM LTE signal the ET PA system achieves ACLR of −35.6 dBc and EVM of 6% at 26-dBm PA output power without digital predistortion. The proposed supply modulator core circuit occupies 1.1-mm2 die area, and is fabricated in a 0.18- \mu \textm CMOS technology. [ABSTRACT FROM AUTHOR]

An integrated reconfigurable CMOS quasi-circulator operating at 2.4 GHz is presented. A passive structure delivers transmit power amplifier (PA) output signal to the differential low-noise amplifier (LNA) input as a common-mode signal and simultaneously delivers received signal as a differential-mode signal at the LNA input. The leakage of the PA output signal at the LNA input is reduced in two steps. First, the use of a reconfigurable impedance matching circuit, instead of a fixed 50- $\Omega $ resistance reduces the leakage by compensating the antenna impedance mismatch, and improves transmitter–receiver isolation. Second, a reconfigurable summing stage adds amplitude and phase adjusted PA output signal to LNA output to cancel the residual PA output leakage. Measurement results show that the receiver achieves a reduction of 90 dB for a single tone and more than 50 dB for a QPSK modulated 40-MHz bandwidth transmit signal. The receiver gain is more than 10 dB and the noise figure in the receiver path is 4.5 dB. The reconfigurable quasi-circulator along with the receiver LNA is designed and fabricated on a 130-nm CMOS technology. The cancellation circuitry occupies 0.27 mm2 and consumes 30-mW quiescent power, while the total active area of the chip is 1 mm2, and it consumes 65-mW power. [ABSTRACT FROM PUBLISHER]