Search

A magnetic pulse compressor (MPC) transfers energy via $C$ – $L$ – $C$ resonance. The pulse width of the MPC is determined by the saturation inductance of the magnetic switch (MS). When using the MS, the pulse width is limited due to the stray elements. To increase the pulse compression rate, the number of stray elements must be reduced. In this paper, we propose an optimum design for an MS having the lowest impedance of stray elements, along with its analysis and experimental verification. The proposed model is designed to have a reduced magnetic path length while retaining the same saturation inductances as that of a common MS; this is accomplished by using the relationship between the magnetic field path length and the number of inductor turns. The experimental results show that the proposed MS decreases the full width at half maximum by 18% and increases the rise rate by 69%. This result demonstrates that the proposed MS increases the pulse compression rate of the MPC by reducing impedance of stray elements in the system. [ABSTRACT FROM AUTHOR]

In a magnetic pulse compressor (MPC), the saturation inductance of the magnetic switch (MS) determines the energy transfer time. Thus, in general, the number of windings on the MS is modulated to vary the saturation inductance. Changing the number of windings also changes the energy transfer time and the saturation time. In this paper, we propose and analyze an MS with multiwindings to modulate the pulse width without affecting the saturation time of the MS. The parallel structure of the multiwindings on the MS decreases the energy transfer time without affecting the saturation time. Through experiments, we show that the energy transfer time is decreased by 13% via a double winding MS. Therefore, an MS with multiwindings can be used to modulate the pulse width at the last stage of the MPC without affecting the saturation time of the MS. [ABSTRACT FROM AUTHOR]