Search

In this paper, a dual-electrode gas switch triggered by ejected plasma is proposed to ensure the switch to be triggered reliably under extremely low switching coefficient. The switch has the configuration of dual electrodes, in one of which a microincentive chamber is embedded to develop ejected plasma into the switch gap, leading to the breakdown of the switch. Both the features of ejected plasma and the triggering discharge characteristics of the switch are studied with different types of gas, gas pressures, voltage polarities, gap distances, triggering pulse energies, and so on. The results show that the switch can be triggered reliably in a much wide working voltage range, as the minimum switching coefficient is low to 9% with the delay time of about 10 \mu \texts . With the decrease of gas pressure and the increase of triggering pulse energy, the height of ejected plasma increases while the delay time of the switch reduces. The polarities of charging voltage and triggering voltage both have obvious influence on the delay time of the switch, and the effect of the former is greater. Under the same gas pressure and triggering pulse energy, the delay time in SF6 is much bigger than that in N2. [ABSTRACT FROM PUBLISHER]

The basic structure and work mechanism of laser-triggered vacuum switch (LTVS) are introduced briefly in this paper, and the processes of primary plasma production and expansion are analyzed as well. A series of experiments has been carried out with different gap voltages, laser wavelengths, laser energies, polarity configuration modes, switch structures, focal lengths, and laser waveforms. The switch structure is modified to improve the heavy-current capability of the switch, and the gap distance is increased to improve the voltage capacity. The special design of the trigger structure can reduce the dependence on the laser energy of the switch and the time delay. A new laser waveform of LTVS multiple wave crests could further decrease the laser energy, and it is the research basis of laser trigger miniaturization and its application in the LTVS. [ABSTRACT FROM PUBLISHER]

This paper demonstrates for the first time the use of microplasma to perform AND, OR, and XOR logic operations. The logic circuits are implemented similar to diode-resistor logic. Output voltages are in the range of \(5-40\) V and can be modified by varying the load resistor. The active area of the microplasma device is just \(50~\mu \) m \(\times 5~\mu \) m. The small interelectrode gap kept breakdown voltage to \(\sim 250\) V when operated in He gas at atmospheric pressure. The use of plasma as a source of free carriers is also demonstrated, with free carriers available up to 500- \(\mu \) m away from plasma. [ABSTRACT FROM PUBLISHER]