Search

Marx generator using all-solid-state devices has been studied for many years. Higher parameters are always the demand for new applications. Traditional all-solid-state Marx generator can output high voltage due to its series topology, but the current is always limited by the switch. In this paper, a stage-stage paralleled topology of Marx generator for high current has been proposed. Topology structure and driving mode comparison for current balance have been analyzed. The paralleled driving mode for the current balance and the shaping waveform has been proposed. For experiment, a four-stage-four-paralleled Marx generator with metal–oxide–semiconductor field-effect transistors (MOSFETs) has been constructed with output pulses 2.2 kV, 730 A (depending on the load), rise time of 31 ns, fall time of 56 ns, and adjustable pulsewidth from 400 to 800 ns. [ABSTRACT FROM AUTHOR]

One of the critical components of high energy density pulsed power systems used to generate short high-voltage and high-power impulses is gas-filled plasma closing switch (PCS). In recent years, significant research efforts have been aimed at finding environmentally friendly gases which can be used in the PCSs, and several gases including dry air, nitrogen, carbon dioxide, argon, and their mixtures have been considered as potentially suitable working fluids in such switches. However, the lack of knowledge of the breakdown characteristics of complex switching topologies filled with these gases limits their practical applications. Therefore, further investigation of the breakdown performance of PCSs is required, in order to establish their applicability for practical use in high-voltage pulsed power systems. This paper reports on the investigation of the breakdown characteristics of a triggered PCS topology with corona discharge electrodes. The self-breakdown voltage of the switch, variation in the self-breakdown voltage, time to breakdown, and jitter have been obtained for the switch filled with “zero grade” air, N2, CO2, and an Ar/O2 mixture up to a pressure of 10 bar (abs). It was shown that the switch can provide a stable breakdown performance with jitter as low as ~1 ns. [ABSTRACT FROM AUTHOR]

This paper presents a novel technique for the voltage droop compensation of long pulses in solid-state bipolar high-voltage Marx generators. Considering the modularity of Marx generators the compensation consists in adding one extra stage to perform as a pulsewidth modulation circuit. This stage voltage is added to the output positive or negative pulses, and an output LfCf filter is included to smooth the voltage pulse waveform. A five-stage laboratory prototype of this circuit has been assembled using 1200-V Insulated Gate Bipolar Transistors and diodes with 1000-V dc input voltage. The circuit was operated at 50-Hz bipolar pulse rate, giving 4-kV bipolar pulses, into a resistive load, with 100- \mu \texts pulsewidth and 9.5-ms relaxation time. The circuit was able to compensate 10% of bipolar pulse voltage droop. [ABSTRACT FROM PUBLISHER]

This paper presents a power electronics converter to generate bipolar high-voltage pulses using low-voltage dc source. Converter is designed based on charging of different capacitors by a predetermined switching pattern and their discharging on the load for pulsed power applications. Low number of power electronics devices and bulky transformer elimination are main advantages of the proposed converter. According to new findings, bipolar high-voltage pulses may lead to higher efficiency in many applications, such as food sterilization industry. The proposed pulse generator generates bipolar controllable pulses with a modular circuit structure based on a capacitor-switched network. Experimental results are presented to verify the analysis. [ABSTRACT FROM AUTHOR]

This paper describes a modular solid-state switching cell derived from the Marx generator concept to be used in topologies for generating multilevel unipolar and bipolar high-voltage (HV) pulses into resistive loads. The switching modular cell comprises two ON/OFF semiconductors, a diode, and a capacitor. This cell can be stacked, being the capacitors charged in series and their voltages balanced in parallel. To balance each capacitor voltage without needing any parameter measurement, a vector decision diode algorithm is used in each cell to drive the two switches. Simulation and experimental results, for generating multilevel unipolar and bipolar HV pulses into resistive loads are presented. [ABSTRACT FROM PUBLISHER]

Modern pulsed power technology has its roots in the late 1950s and early 1960s, and it was driven overwhelmingly by applications in national defense carried out by several countries, especially the U.S., U.K., Russia, and China. The following decades, particularly the early 1990s, witnessed an increased interest in compact systems with pulse repetition rate that could be used in nondefense applications such as treatment of material surfaces by plasma and beam interactions, treatment of pollutants, food sterilization, medical applications, etc. This spawned a new generation of pulsed power components (solid-state switches) that led to completely solid-state modulators. This paper describes how the pulsed power technology used originally in beam sources and cathodic arcs has converged to produce power sources for plasma-based ion implantation (PBII) and related technologies. The present state of the art is reviewed, and prospects for future advances are described, especially for PBII. [ABSTRACT FROM AUTHOR]