Search

In this paper, a dual-electrode gas switch triggered by ejected plasma is proposed to ensure the switch to be triggered reliably under extremely low switching coefficient. The switch has the configuration of dual electrodes, in one of which a microincentive chamber is embedded to develop ejected plasma into the switch gap, leading to the breakdown of the switch. Both the features of ejected plasma and the triggering discharge characteristics of the switch are studied with different types of gas, gas pressures, voltage polarities, gap distances, triggering pulse energies, and so on. The results show that the switch can be triggered reliably in a much wide working voltage range, as the minimum switching coefficient is low to 9% with the delay time of about 10 \mu \texts . With the decrease of gas pressure and the increase of triggering pulse energy, the height of ejected plasma increases while the delay time of the switch reduces. The polarities of charging voltage and triggering voltage both have obvious influence on the delay time of the switch, and the effect of the former is greater. Under the same gas pressure and triggering pulse energy, the delay time in SF6 is much bigger than that in N2. [ABSTRACT FROM PUBLISHER]

In order to investigate the different features of the positive leader propagation in the rod–plane and inverted rod–plane gaps, the discharge experiments in a 3-m rod–plane gap and a 3-m inverted rod–plane gap were carried out under switching impulse voltage. The positive leader propagation process was recorded by using a high-speed CCD camera. Some aspects to describe the positive leader propagation characteristics of the rod–plane and inverted rod–plane gaps are obtained and compared in this paper, including the critical corona radius, the average continuous leader inception voltage, the axial leader velocity, and the final jump length. The possible reason resulting in those differences is also discussed here. [ABSTRACT FROM PUBLISHER]