Search

One of the critical components of high energy density pulsed power systems used to generate short high-voltage and high-power impulses is gas-filled plasma closing switch (PCS). In recent years, significant research efforts have been aimed at finding environmentally friendly gases which can be used in the PCSs, and several gases including dry air, nitrogen, carbon dioxide, argon, and their mixtures have been considered as potentially suitable working fluids in such switches. However, the lack of knowledge of the breakdown characteristics of complex switching topologies filled with these gases limits their practical applications. Therefore, further investigation of the breakdown performance of PCSs is required, in order to establish their applicability for practical use in high-voltage pulsed power systems. This paper reports on the investigation of the breakdown characteristics of a triggered PCS topology with corona discharge electrodes. The self-breakdown voltage of the switch, variation in the self-breakdown voltage, time to breakdown, and jitter have been obtained for the switch filled with “zero grade” air, N2, CO2, and an Ar/O2 mixture up to a pressure of 10 bar (abs). It was shown that the switch can provide a stable breakdown performance with jitter as low as ~1 ns. [ABSTRACT FROM AUTHOR]

Starting from the updated requirements of an advanced laser system, a switch–trigger system for a 2.0-MJ pulsed power supply (PPS) module is developed. This paper discusses the design, construction, and testing of this switch–trigger system. The two-electrode construction for the spark gap switch is selected because of its superiority in terms of long working life, high peak currents, and fast rise time of currents. The trigger generator based on resonant charging of a pulse transformer is constructed. A magnetic isolator and a pressure controller are the auxiliary equipment of this system. In the section based on mathematical principles, the equations of the lifetime and stability of this spark gap switch with graphite electrodes are given. These expressions can be regarded as the design basis of the same type of switch. As for the trigger generator, the analysis states that an appropriate ratio can be obtained when using the resonant charging based on a core-type pulse transformer. The charging time is dependent on the leakage inductance and the capacitance of the primary and secondary capacitors. Extensive testing proves the operating parameters of the switches and the trigger generator. The measured discharge current waveform of the 2.0-MJ capacitive PPS module is demonstrated to be over 500 kA peak current and 500 \mus pulse width. The life test proves that the switch–trigger system can support more than 200 kC transfer charge. By replacing the electrodes, the lifetime of this switch can be extended furthrer. [ABSTRACT FROM PUBLISHER]

Normally, a three-electrode spark–gap switch is controlled by the application of an external trigger impulse. In this paper, a novel self-breakdown sharpening switch based on the three-electrode spark–gap switch is proposed. However, in this paper, the trigger electrode is connected to ground through a resistor, with the prespark between the trigger and the main electrodes providing the electrons and ions that initiate conduction of the main gap. A prototype sharpening switch with a breakdown voltage of 116.0 kV \pm 1.0 kV and a breakdown time of 3.396\ \mu\s\pm 0.036 \ \mu\s is described. When compared with a conventional two-electrode spark–gap sharpening switch, the novel sharpening switch has both a more stable breakdown voltage and lower jitter, and the dc breakdown and impulse breakdown characteristics of the two types of switches are presented and compared. When the impedance of the resistor connected to the trigger electrode is high, it is demonstrated that both the value of this resistor and also the type of load have little effect on the characteristics of the novel switch. However, the breakdown voltage of the novel sharpening switch was found to be sensitive to the rise time of the input pulse from the trigger generator. The prototype sharpening switch has a lifetime at least 20 000 shots and is now in use in a major pulsed power conditioning system. [ABSTRACT FROM PUBLISHER]

A repetitive 0.6 MV, 10 GW Tesla-driven Blumlein pulsed power generator, with an overall energy efficiency in excess of 90%, has been designed, manufactured and demonstrated by the Pulsed Power Group at Loughborough University. This paper describes the application of various numerical techniques used to design a successful generator, such as filamentary modeling and electrostatic and transient circuit analysis. All the major parameters of both the Tesla transformer and the Blumlein pulse-forming line were determined, enabling accurate modeling of the overall unit to be performed. The wide-bandwidth embedded sensors used to monitor the dynamic characteristics of the overall system are also presented. Experimental results obtained during this major experimental program are compared with theoretical predictions and the way ahead toward generating faster output voltage impulses is considered. [ABSTRACT FROM PUBLISHER]

Field distortion gas switches are extensively used in pulsed power systems. Switch performance typically degrades because of electrode erosion, which directly influences the output parameters, stability, and reliability of pulsed power systems. With the same value of $pd$ , different pressure and gap lengths in gas switches can affect electrode erosion property and thus, the subsequent performance degradation, but few results have been published. In this paper, repetitive discharges have been undertaken in a three-electrode field distortion gas switch with fixed pd$ to study the influence of pressure and gap length on electrode erosion and switch performance. The morphology of electrode surface and time histories of both trigger jitter and the probability of prefire have been investigated during the whole life cycle of the gas switch. The results show that when pd$ is fixed, high pressure and a short gap make for low trigger jitter at the start of the switch life cycle but lead to more severe electrode erosion, expediting the degradation of performance in field-distortion gas switches. Meanwhile, the probability of prefire increases rapidly with the increase of pressure. [ABSTRACT FROM PUBLISHER]

Switching time jitter is an important property to consider when selecting closing switches for pulsed-power systems. The corona-stabilized switch (CSS) is identified as an interest for low-jitter systems, in particular for systems where a high-repetition rate is required. In this paper, a commercial CSS is studied and its operating conditions are determined. [ABSTRACT FROM AUTHOR]

Pulsed power technology is one of the technological foundations in high and new technology research, which has extremely broad development and application prospect. Gas switch is one of the key elements in pulsed power devices, and electrode erosion is a key restrictive factor in high-power gas switch development and application. According to the 1-D equation of heat conduction and thermal equilibrium equation near the electrode surface, this paper researches the electrode heat conduction mechanism, establishes the electrode erosion calculation model, calculates electrode erosion heat fluxes and their peak powers caused under different discharge conditions, and proceeds to calculate the depth of electrode etch pit. Calculation results indicate that arc joule heat is the main reason for electrode erosion when discharge current is not too high. In the light of different discharge parameters, that is, peak current, electric quantity, and current waveform, as well as single discharge electrode erosion experiments, the calculation formula of etch pit depth is fitted. The results indicate that model and fitted calculation results are relatively approximate to the experiment results. [ABSTRACT FROM PUBLISHER]

SPHINX is a microsecond linear transformer driver located at Atomic Energy Comission (CEA) Gramat (France), which can deliver a current pulse of 6 MA within 800 ns in a Z -pinch load. Using the concept of the dynamic load current multiplier (DLCM), which was proposed by Chuvatin, we expect to increase the load current above 6 MA, while decreasing its rise time to \sim300 ns. The DLCM developed by the CEA Gramat and International Technologies for High Pulsed Power (ITHPP) is a compact system made up of concentric electrodes (autotransformer), a dynamic flux extruder (cylindrical wire array), a vacuum convolute (eight post-hole rods), and a closing switch (compact vacuum surface switch). The latter is a key component of the system, which is used to prevent the current from flowing into the load until the inductance builds up due to the implosion of the wire array. This paper presents the design and testing of the DLCM surface switch, resulting from both electrostatic simulations and experiments on the SPHINX generator. These studies, carried out either with or without load (open circuit), were valuable for a first experimental evaluation of the DLCM scheme in a microsecond regime and provided detailed information on the surface switch behavior. [ABSTRACT FROM AUTHOR]

A technology scheme that replaces Marx generator with Tesla transformer was put forward to improve the reliability of the pulsed power system. In order to validate the technology scheme, a Tesla transformer was designed and tested. The excitation of the primary consists of two 4- $\mu \text{F}$ polypropylene film capacitors which are separated by a three-electrode field distortion gas switch. A deionized water dielectric pulse forming line (PFL), with 13-nF equivalent capacitance, acts as the secondary capacitor. The actual transformation ratio is 9.7 approximately, and the PFL voltage is as high as 1.2 MV when two capacitors are charged to ±62 kV by the bipolar high-voltage direct current. The prefire probability of switch is described by the Weibull distribution and the working ratio of the switch is elaborately chosen so as to balance the prefire probability and the trigger jitter. For ±62 kV charge voltage and 0.2-MPa pressured air dielectric, the prefire probability of switch is only $1 \times 10^{-7}$ and the jitter of that is 5 ns. When confidence is 0.90, the failure probability of pulsed power machine is $2.8 \times 10^{-4}$ according to the Binomial distribution correspondingly. [ABSTRACT FROM AUTHOR]

The electrode erosion is a serious problem for pulsed power switches working under high current. A rotary-arc gap switch (RAG) is the switch form that can reduce the electrode erosion through the fast rotation of the arc. A RAG with a coaxial cylindrical structure is designed in this paper, mainly composed of two electrodes and two coils. The finite-element-analysis software Ansoft is used to simulate and analyze the electromagnetic characteristics of the switch. The simulation shows that the distribution of the magnetic field generated by the coils is symmetric and is with a mirrorlike structure. The existence of the electrodes will weaken the magnetic field because of the reaction of the eddy currents. Cutting the electrodes is the way to solve the problem, and cutting the outer electrode is much more valid than cutting the inner electrode. However, the number of slots in the outer electrode does not influence much. When the RAG works, the arc will rotate fast around the inner electrode due to the action of a Lorentz force under the axial magnetic field, as is convenient to reduce the electrode erosion and prolong the life of the switch. The high-current experiments show that the RAG can withstand very high current and very high charge transfer with very slight electrode erosion. [ABSTRACT FROM AUTHOR]

A bipolar Blumlein former has been designed and successfully implemented as an extension to an existing 10-GW-Tesla-driven Blumlein pulsed power generator. The new system is capable of generating a voltage impulse with a peak-to-peak value reaching 650 kV and having a high-frequency limit of the bandwidth well in excess of 1 GHz. Constructional details are provided, together with experimental results and analysis using the 3-D software modeling of the bipolar former that provides the results in good agreement with experimental data. [ABSTRACT FROM AUTHOR]

SPHINX is a microsecond linear transformer driver LTD, used essentially for implosion of Z-pinch loads in direct drive mode. It can deliver a 6-MA current pulse within 800 ns into a Z-pinch load. The dynamic load current multiplier concept enables the current pulse to be modified by increasing its amplitude while reducing its rise time before being delivered to the load. This compact system is made up of concentric electrodes (autotransformer), a dynamic flux extruder (cylindrical wire array), a vacuum convolute (eight postholes), and a vacuum closing switch, which is the key component of the system. Several different schemes are investigated for designing a vacuum switch suitable for operating the dynamic load current multiplier on the SPHINX generator for various applications, including isentropic compression experiments and Z-pinch radiation effects studies. In particular, the design of a compact vacuum surface switch and a multichannel vacuum switch, located upstream of the load are studied. Electrostatic simulations supporting the switch designs are presented along with test bed experiments. Initial results from shots on the SPHINX driver are also presented. [ABSTRACT FROM PUBLISHER]