Search

This paper evaluates the maximum potential rise on the traction earth (TE) conductor caused by stray currents in the Taipei Rail Transit Systems (TRTS). The stray current from the TRTS will flow into the earth due to the voltage difference along the running rails caused by the traction currents returning to the substations. The potential rise of 0.1 V is admitted in international recommendations as the maximum acceptable value for corrosion protection of utilities outside a dc railway system. Since TRTS is one of the dc-traction rail transit systems, it may cause corrosion or other effects by stray currents to the existing underground metallic structures. As a result, the purpose of this paper is to evaluate whether the maximum potential rise on the TE conductor caused by stray currents from IRTS is greater than the maximum permissible value 0.1 V or not. [ABSTRACT FROM AUTHOR]

This paper presents a practical case for safety assessment of bulk supply substations (BSS) and traction supply substations (TSS) in Taipei Rail Transit Systems (TRTS). For a substation grounding system to be safe, the maximum touch-and-step voltages should not exceed postulated safety criteria. The safety criterion in IEEE Standard 80 is defined in terms of permissible body current. The permissible body current is then translated into the permissible touch-and-step voltages. Since the mesh voltage is usually the worst possible touch voltage inside the substation (excluding transferred potentials), the mesh voltage is used as the safety criteria. In other words, safety assessment of an ac substation grounding system in TRTS is referred to a procedure by which the mesh and step voltages are computed and compared to the maximum permissible (safe) touch-and-step voltages. Computation results for the orange line at 019 station are presented. [ABSTRACT FROM AUTHOR]

Presents an Electromagnetic Transients Program (EMTP) model based on Taiwan Railway Substation equivalent circuit model with Le Blanc transformer. Simulation of the same short circuit test to verify actual fault current and accuracy of the equivalent circuit model; Evaluation of the maximum short circuit with reference to the proposed equivalent circuit; Possible causes of melt down events based on simulation results.