Search

The large number of voltage levels in a modular multilevel converter (MMC) make staircase modulation a feasible alternative, particularly in high-power applications. However, staircase waveforms do not necessarily mean operation of the MMC submodules (SMs) at the fundamental frequency. This paper presents an analysis of SM switching frequencies in staircase-modulated MMCs and their correlation to the modulation index and load phase angle. A carrier-based pulsewidth-modulation (CB-PWM) equivalent technique is also developed. This analysis demonstrates that CB-PWM techniques provide a similar switching frequency with superior harmonic performance and improved voltage balancing characteristics at all modulation indices compared to staircase modulation. The theoretical analysis is verified with extensive simulation results for MMCs with different SMs and experimental results from a laboratory prototype. [ABSTRACT FROM PUBLISHER]

The three-phase series-connected modular multilevel converter (SC-MMC) is presented as one option for high-voltage direct current (HVDC) tap to reduce the cost of an HVDC station. Compared with conventional three-phase parallel-connected MMC, the number of semiconductor switches in SC-MMC is reduced by one-third to withstand the same dc voltage. First, the paper studies the operating principle of SC-MMC, and then presents an interspacing phase-shifted pulsewidth-modulated method which could improve the waveform of the output ac voltage for a given switching frequency. Next, the control strategy based on the identical real power input of each phase is proposed to balance the dc voltage of each phase under an unbalanced grid condition. The current limit of switching devices is also taken into consideration to protect SC-MMC from overcurrent. Furthermore, a universal zero-sequence current controller is developed as one part of the control strategy. In addition, an innovative method to suppress the third harmonics of ac current is presented. With the third harmonic suppression strategy, the SC-MMC can operate with much smaller SM capacitors without deteriorating the ac current, which contributes to the cost reduction further. Finally, simulation results obtained in PSCAD/EMTDC are provided to validate the proposed control strategies. [ABSTRACT FROM PUBLISHER]