Search

A novel scheme is proposed to monitor the operation of capacitors scattered in MV distribution systems. It first codes each capacitor with a distinctive switching character by setting a unique combination of a three-phase switching order and time interval. As a result, the transient of the three-phase reactive power during capacitor switching will appear in a unique way. Then, the reactive power disturbances monitored in the substation are decoded to identify which capacitor is being switchedonandoff. A detailed decoding method is developed to realize this identification without being impacted by the switching interference of loads and other reactive power compensation devices. Moreover, the implementation of the proposed scheme in the field is elaborated, and the resultant three-phase voltage unbalance is analyzed in this paper. Compared with existing methods, this scheme only requires one power quality monitor located at the substation to monitor the operations (energizing or de-energizing) of downstream distribution capacitors without extra communication devices. The operation information is valuable for tackling power quality problems caused by capacitor switching and optimizing the distribution grid operation. [ABSTRACT FROM AUTHOR]

This paper presents a control scheme of cascaded H-bridge STATCOM in three-phase power systems. Cascaded H-bridge STATCOM has merits in point of switching losses, output harmonics, and the number of circuit components. But every H-bridge cell has isolated dc capacitors. So the balancing problem of capacitor voltages exists. Since STATCOM is often requested to operate under asymmetrical condition by power system faults, capacitor voltage balancing between phase clusters is particularly important. Solving this problem, a technique using zero-sequence voltage and negative-sequence current is proposed. By this scheme, the STATCOM is allowed to operate under asymmetrical conditions by power system faults. The validity is examined by digital simulation under one line and two-lines fault circuit condition. [ABSTRACT FROM AUTHOR]

This paper develops a signal processing, time-frequency analysis-based analytic solution to locate transient capacitor switching disturbances. The flow of transient disturbance energy caused by the capacitor switching is determined by the time and frequency localized phase difference. Cross time-frequency analysis provides time- and frequency-localized phase difference between the transient voltage and current disturbance waveforms which determine the direction of transient disturbance energy flow. The time and frequency localization properties of the proposed scheme allows one to expand the application to complicated power distribution systems without knowledge of system parameters, capacitor size, and configuration. The proposed scheme has been verified by the Electromagnetic Transients Program simulation for all possible spatial locations of the capacitor switching. [ABSTRACT FROM AUTHOR]

Distributed generation (DG) may bring about reliability degradation, instead of reliability enhancement, due to recloser-fuse miscoordination. For the prevention of this reliability degradation, this paper proposes a method to find the threshold value of the DG capacity, beyond which recloser-fuse coordination is lost. Mathematical equations for protective devices are used to set up the protection settings and calculate the threshold value. Three reliability indices—SAIFI, SAIDI, and ENS—are evaluated and compared with the study cases in the reliability test system RBTS bus 2. The results show that the proposed method is effective to prevent the deterioration of system reliability. In addition, a simple modification to the protection system is presented as a preliminary solution. [ABSTRACT FROM AUTHOR]

Capacitor switching transient is one of the most commonly encountered power quality disturbances. Measuring and identifying these transients remains a challenge as the characteristics depend on the system parameters, capacitor ratings and makeup of the connected loads. This paper describes a systematic approach to design an automated system for identifying such transients. It relies on the belief that some of the system and component parameters are either known or can be determined, and thus can be used to develop the necessary pattern for identification and discrimination. However, identification also needs to be robust against uncertainties in these parameters. The proposed method combines the techniques of wavelet transform, rank correlation and fuzzy logic to account for the uncertainties. Dynamic simulations were undertaken to verify the method and to illustrate its robustness when dealing with various uncertain transient characteristics. It is shown to be capable of identifying transients caused by switching of both isolated and back-to-back capacitors. [ABSTRACT FROM AUTHOR]