Search

The modular multilevel converter (MMC), owing to the presence of a large number of submodules (SMs) and energy storing elements, requires a large footprint and initial investment. To address these issues, this paper proposes the switched modular multilevel converter (SMMC). It consists of two major elements; the chain-links (CLs), consisting of cascade connection of SMs as in MMC, and the single-pole-triple-throw (SPTT) switches, which can be realized using either the T-type or NPC-type switch strings. The SMMC works on the principle of connecting all the phase-legs in series and their respective positions are mutually interchanged. It offers a compact structure as the SMs count is reduced to 33% of MMC, which results in a much lower energy storage requirement. Furthermore, it does not have inter-phase circulating current problem and hence the CL inductors can also be avoided. The SMMC structure, operating principles, control, and modulation schemes are explained in detail. A detailed comparison of SMMC with the other major existing converters is carried out to highlight the important features of SMMC. The efficacy of SMMC is validated using PSCAD simulation studies with a 19-level grid-connected SMMC model. A 3-phase 19-level SMMC laboratory prototype is developed to further validate its feasibility. [ABSTRACT FROM AUTHOR]

The voltage ratings for dc transmission and distribution are not currently standardized because cable technology is advancing rapidly and therefore a low step-ratio dc–dc converter at multi-megawatt scale is a crucial technology for combining point-to-point dc links into multi-terminal networks. This paper presents a modular multilevel dc–dc converter configuration with only a single stack of half-bridge sub-modules (SM) and a resonant tank. The power processed through the stack is a small fraction of the throughput power if the step ratio is small ($1 - {\boldsymbol{v}_{\boldsymbol{L}}}/{\boldsymbol{v}_{\boldsymbol{H}}}$). Detailed analysis shows the required semiconductor ratings are much smaller compared to the front-to-front MMC and modular converters derived from standard dc–dc topologies. Further, the requirement for SM capacitive energy storage is also significantly less than those converters. The theoretical analysis and the operating principles have been verified by full-scale simulation examples and experiments with a down-scaled prototype. The SMs are operated with an adjustable phase shift to create a high frequency excitation across the resonant tank for further volume reduction. The SM capacitors self-balance without the need for switching pattern adjustments and the resonant operation provides soft switching for all power switches to increase efficiency. [ABSTRACT FROM AUTHOR]

This paper proposes a transformerless dc–dc converter, which features a large voltage ratio, for medium-voltage dc (MVDC) applications. The proposed converter combines a boost converter with a series-parallel resonant converter which enables soft switching of the power switches and diodes. Further, the power switches and diodes of the proposed converter experience lower voltage stresses compared to the other topologies. The proposed converter is modular and, therefore, permits series and/or parallel connection of multiple units for the desired voltage and/or power ratings. This paper discusses the principles of operation, analysis, and design of the proposed converter. Simulation and experimental results are presented to demonstrate the effectiveness of the proposed converter. [ABSTRACT FROM AUTHOR]