Search

DC ice melting is an effective technical method against ice disaster on transmission lines. To satisfy the demand for simultaneous de-icing and reactive power compensation for substations, this paper proposed a large-capacity low-cost DC deicer with reactive power compensation, which is mainly composed of rectifier transformer, Static Var Generator (SVG) and diode rectifier. In the proposed topology, SVG and diode rectifier share the rectifier transformer, but rectifier transformer capacity is not increased compared with a single deicer. This paper firstly presents the proposed topology and analyzes its advantages. Then, the rectifier transformer design is introduced, and the SVG control strategy is presented. Simulation results for the proposed device are presented, and an engineering devices with a capacity of 21.8 MVA developed for the 220 kV Fuchong substation is described. The simulation and application results indicate that the proposed devices work well. [ABSTRACT FROM AUTHOR]

In electrical arc furnaces (EAFs), an unstable arc leads to unfavorable operation of the EAF, which can be rectified by using series reactors. Installation of the series inductor affects some electrical parameters of the EAF, such as arc stability, power factor, arc length, and the EAF efficiency. Furthermore, it reduces the effective transferred power to the EAF. To achieve desired transferred power after installation of the series reactors, the secondary voltage of the EAF transformer should be increased. However, after any tap changing of the EAF transformer, arc stability and other relevant parameters are affected. So the impact on the EAF electrical magnitudes caused by changes in the series reactor and in the EAF transformer tap should be simultaneously studied. This research deals with a new method for optimal setting of the series reactor and EAF transformer tap to achieve the EAF best performance. Using a nonlinear model for the EAF, its electrical characteristics, at nominal transformer current and for all of the possible transformer and reactor taps, are calculated and the results are tabulated. Using these tables, the optimal setpoint for transformer and series reactor taps is determined in different conditions. Finally, the method is investigated from an economic point of view. [ABSTRACT FROM AUTHOR]