Search

The capacitor condition monitoring is an important issue for the reliable operation of modular multilevel converters (MMCs) in high-voltage applications. The numerous capacitors make the monitoring for the capacitor condition complex and computation-consuming. This paper proposes a hierarchic capacitor condition monitoring strategy to assure the reliability of high-voltage MMCs. In the strategy, the switching times of the switching signals are counted to detect the condition of the capacitor in each submodule (SM). Then, the subsequent capacitance calculation method is only conducted to the abnormal capacitors indicated by the above condition detection algorithm. Meanwhile, the variations of the measured and reference capacitor voltages are employed to calculate the capacitance in the proposed method. The condition detection algorithm shrinks the scope where the abnormal capacitors locate, which avoids calculating the total capacitances in MMCs. In the proposed capacitance calculation method, the complex operations are further saved. Both the two measures reduce the computation burden effectively. The implementation of the whole monitoring strategy is simple and fit for high-voltage MMCs. Moreover, the strategy has no adverse influence on the normal operation of MMCs. The effectiveness of the proposed strategy is verified by the simulation studies with the professional tool Matlab/Simulink. [ABSTRACT FROM AUTHOR]

The modular multilevel converter (MMC) is one of the most attractive topologies for high-voltage and high-power applications. Reliability is an important challenge for MMCs due to large amounts of power switches in the phase leg of the MMC. To enhance the reliable performance of MMCs, an effective and accurate fault detection and localization strategy for MMCs with the nearest level modulation is proposed in this paper. According to the general characteristics of the MMC, the capacitor voltage of the faulty submodule (SM) is higher than the healthy ones’. Based on the sorting algorithm, the faulty SM will have the maximum voltage and it will be identified by the proposed fault detection method. The auxiliary monitoring is supplemented to the detection algorithm for the cases of faults occurring in multiple SMs. The faulty SM localization strategy is based on the differences of capacitor voltages. The faulty switches are located by the distinctions of capacitor voltage in different current intervals. The proposed strategy could be applied under the cases of single or multiple SMs failures and identifies three kinds of the power switches faults in the faulty SM. The validity of the proposed strategy is verified by the simulation results in MATLAB/Simulink. [ABSTRACT FROM AUTHOR]